Question about 1990 Chevrolet K1500

Open Question

When I start the truck I have no pressure in my clucth

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why my clutch cylinder lost its pressure when not in use for 12hours but once i adjust the piston of the clucth cylinder the pressure come back again


Hi this is a common problem with new or old hydraulic systems.If the hydraulic system has no leakages, no rubber reinforced hoses swelling under pressure. It will be correct to replace clutch master and slave cylinder .Do observe the condition of clutch and pressure plate, This seems to be a case of internal pressure loss .

Apr 05, 2015 | Cars & Trucks

1 Answer

While im driving im not getting enough power and the engines loud


if you have a manual transmission, adjust the clucth pedal - if wont work? replace your pressure plate, clucth disc, and the release bearing.
i dont have any idea on automatic transmission.

Sep 17, 2011 | 1992 Ford Econoline

1 Answer

What price am I looking at getting a clutch replacement on a Hyundai Elantra year 2000? When I change gears the engine doesn't go fast at all.


the price of the clucth disc is $116.55,pressure plate $76.03,release bearing$47.09.maybe your clucth disc is worn out already.you need to replace the three item to give a good perfomance

Aug 18, 2011 | 2000 Hyundai Elantra

2 Answers

After you start the car, the car is still on neutral once you press the clutch in then the car makes screeching noise. This also happens when changing gears.


Something is wrong within the clutch: either the pressure plate or the bearing are damaged and they will have to be replaced.

Aug 11, 2011 | Volkswagen Polo Cars & Trucks

1 Answer

Clucth slips every nw and again.ive replace clucth master and slave cylinder and the hoses for the clutch and still get them same problem.i can fix it for like a week each time by releasing the pressure...


the push rod for the clutch master cylinder has no free play,could be the master cylinder is too tight to the bulkhead and it should have a spacer in the form of a shim/gasket ,or the distance between the end of the push rod to the master cylinder is adjustable or the pedal mechanism is adjustable

Jun 28, 2011 | Hyundai Accent Cars & Trucks

1 Answer

I changed the starter in my 93 saturn before i


You left off or broke one of the feed wires that are hooked directly to the battery terminal on the starter.Good Luck!

Mar 21, 2010 | 1993 Saturn SL2

1 Answer

Clutch no pressure


replace the clutch slave and master cylinder,this is a hard one to bleed, may have to pry clutch arm all the way in so slave piston is all the way back to not be able to hold air, once all air is out you may have to pump pedal maany times let it sit then pump pedal again you will see pedal getting better and better, good luck.

Nov 01, 2009 | 2000 Honda Accord

1 Answer

35 chey s10 ac compressor getting no fire ran hot wire compressor works clucth engaes ac fuse okay ac relays okay there is no pressure switch on ac line fan works good need help


The pressure switch on the low-side line breaks the circuit to the compressor if there is a problem with refrigerant pressure. You may have a refrigerant pressure problem or just a bad pressure switch.

Aug 29, 2009 | 1998 Chevrolet S-10 Pickup

1 Answer

Reassembly of a 1996 mitsubishi galant 5-speed clucth, pressure plate and release manuel


Put the pilot bushing in the crank shaft, install the flywheel. Next put the pressure plate back on, but leave the bolts loose so you can use the plastic alignment tool. Insert it through the pressure plate hole, and into the pilot bushing. Then tighten down the pressure plate bolts, and remove the tool. Install the throwout bearing on the clutch fork, and you are ready to go.

Mar 27, 2009 | 1996 Mitsubishi Galant

Not finding what you are looking for?
1990 Chevrolet K1500 Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...