Question about 2008 Chevrolet Colorado 2WD

1 Answer

I have a 2008 chevy colorado pu and had to have tires put on....the tpm comes up and stays on ...how can this be reset

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 146 Answers

Check the owners manual should be a way in there

Posted on Sep 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

TPM


check the pressure in all the tires write each one down then go to the driversside door and look for a tag that will have the pressure in each tire and size of the recommended tires and pressure dont exceed that pressure or tire size and dont be less than whats recommended if the tires are in specifications then take back to the tire dealer and have them replace the tpm that they damaged

May 23, 2013 | 2008 Dodge Nitro

1 Answer

2008 Chevrolet Colorado - engine light comes on and display says SERVICE TPM ??? Anybody have an idea?


This is refering to the tire pressure monitoring system. Either a sensor is damaged or not being received, or you need to check for proper inflation in all of your 4 tires. It is a saftey feature that was required in all cars sold in california at least...not sure about other states...since 2009.

Oct 08, 2012 | Cars & Trucks

1 Answer

If I take out the tire pressure sensors from my wheels would the tpm warning go off from my dashboard?


No.Because the tire pressure monitor is looking for a frequency from the sensors and does not see it.There for the light will stay on constantly.If you have a light that is constantly on and the tire pressures are all fine.Then you need to relearn the tire pressure monitor to make the light go off.Unless you have a bad sensor.There is a special tool for relearning the tire pressure monitor.It also has to be put in learn mode to perform this.Which is done with your keyless entry fob or in your case you apply the parking brake turn the key on and turn the light switch from off to park 4 times within 4 seconds.The horn will chirp twice.this means the system is in learn mode.This is where the special tool comes in.you need to go to a repair shop that has a tool for relearning.If the sensors are all good the light will go off.Hope this has helped.Good luck.

Dec 12, 2011 | 2007 Chevrolet Colorado (Extended Cab) New...

2 Answers

TPM light stays on. All 4 tires have 26 lbs of air. What is recommended tire pressure?


32 psi is the usual recommended pressure but you may have to fill the tires to 35 psi to make the TPM system reset. That's how most systems recognize that you have serviced the tires. Most TPM systems will indicate low tire pressure around 26-28 psi.

Jan 17, 2011 | 2008 Toyota RAV4

3 Answers

I have a chevy colorado 2007. The "serv tpm" light


TPM THAT MEANS TEMPOMAT CRUISE CONTROL.CHECK TO SEE IF BRAKE LIGHTS WORK.IF NO CHECK BRAKE LIGHT SWITCH FUSE. IF FUSE OKAY BRAKE LIGHT SWITCH FAULTY OR YOU HAVE OPEN WIRE FROM BRAKE SWITCH TO FUSE BOX.SEE YOUR BRAKE SWITCH DEACTIVATES THE CRUISE CONTROL SYSTEM.PROBLEMS WITH BRAKE PEDAL POSITION SWITCH WILL SET OFF CRUISE CONTROL WARNING LIGHT.IF BRAKE SWITCH OKAY.THE DEALERSHIP HAS TO DIAGNOSIS AND FIX PROBLEM.

Dec 03, 2010 | 2007 Chevrolet Colorado (Extended Cab) New...

3 Answers

I HAVE A 2008 CHEVY COBALT, THE CHECK TIRE PRESSURE LIGHT IS STAYING ON. HOW DO I GET IT SHUT OFF?


All you should need to do is check and set all tire pressures and make sure to check the spare also, after all tires are set with air you then drive a few blocks and the light should reset if the light does not reset then you will need to find out which wheel has a bad air pressure sensor, this is done with a tool that is put on the valve stem or a scan tool to see which tire is showing the wrong pressure, hope this helps.

Oct 27, 2010 | 2008 Chevrolet Cobalt

2 Answers

Had 4 new tires installed system blinked for 2 days on and off. now ligth stays on. how do you reset the light? all tires are at 35 psi.


It is possible that one of the sensors was damaged when they replaced the tires. If this occurred, the light will remain lit. Otherwise, after a pressure change the light will automatically turnoff after driving several minutes above 25MPH.

There is also a Nissan TPM reset tool which is designed to turn off the TPM warning light in 2003 and newer Nissan vehicles that have the TPM reset connector. Check your owner's manual to see if your vehicle has the connector. You can find the reset tool online for about $25.

Dec 11, 2009 | 2008 Nissan Frontier

1 Answer

I have a 2003 chevy impala and the low tire pressure light is on. how do i reset it


Using the exterior lamp switch

  1. Adjust all tires pressures to the recommended kPa/psi.
  2. Turn ON the ignition, with the engine OFF.
  3. Cycle the exterior lamp switch from OFF to parking lamps 3 times within 5 seconds.
  4. Use the scan tool in order to clear the TPM DTC.

  5. Using the RDS radio, if equipped
  1. Adjust all tire pressures to the recommended kPa/psi.
  2. Turn the ignition to ACC or ON, with the engine OFF.
  3. Turn the radio OFF.
  4. Press and hold the DISP button until SETTINGS is displayed.
  5. Press the SEEK up or down arrows until TIRE MON is displayed.
  6. Press the PREV or NEXT button to enter the submenu. RESET will be displayed.
  7. Press the DISP button, A chime will sound and DONE will be displayed.
  8. Scroll until EXIT is displayed.
  9. Press the DISP button to exit the TPM reset mode. A chime will sound to verify exit.
  10. Use the scan tool in order to clear the TPM DTC.


Nov 17, 2009 | 2003 Chevrolet Impala

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

445 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...