Question about 1998 Jeep Grand Cherokee

3 Answers

What does the hose to the power steering pump look like and where is it located..on top or underneath

Posted by on

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 173 Answers

HI here are some pictures of location this is a 4.0 enginewhat does the hose to the power steering pump look - 34d1f2e.jpg

Posted on Sep 25, 2009

Ad

Why do you need that info? What engine? What do you plan on doing assuming you will do the work yourself

Posted on Sep 25, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

Back bottom, one or two rubber hose 3/4" wide and metal ends.

Posted on Sep 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a power steering leak how and what do I need to do first to fix this problem?


First thing is to identify where the leak is, you have hoses, or the connection under reservoir where the most common leaks will be found. Of course if leak is not coming from top area then you have to look underneath where the rack is located. Just look for the leak where you usually see rubber accord boot located on inside end of steering tie rod. If it is not the upper hoses at pump, and just a seal in rack, try power steering stop leak, I used Lucas with great success on one of my vehicles.
Good luck. FREE-BUSINESSES.com

Feb 21, 2016 | Cars & Trucks

1 Answer

How to change cam sensor on pontiac GR AM 3,4L 1999


Place a jack underneath the engine with a block of wood on it as to not damage the engine and pump up the jack just enough to keep the engine from sagging down. Then remove the engine mount near the power steering unit. Removing the motor mount doesn't have to be done, but it makes it easier to remove the power steering pump (your choice). Remove power steering pump and set it aside keeping all the hoses attached. Camshaft position sensor is located beneath power steering pump. It should be held on by 1 bolt if I remember right. Disconnect the 2 wire harness and remove sensor.

Aug 27, 2013 | Cars & Trucks

1 Answer

Wheres power steering pump located on 1997 ford contour,the power steering stoped working


POWER STEERING PUMP IS BELT DRIVEN PUMP LOCATED NEAR TOP ENGINE.LOOK FOR PUMP THAT HAS A RESERVOIR AND A CAP THAT READS POWER STEERING FLUID ONLY ALSO POWER STEERING PUMP HAS TWO POWER STEERING HOSE CONNECT TO RACK AND PINION.

Mar 12, 2011 | Ford Contour Cars & Trucks

1 Answer

How to replace a powersterling pulley on 1999 dodge grand caravan


The procedure to remove the power steering pulley out of the 1999 dodge caravan engine is as follows:----

· First disconnect the black, negative cable from the battery.

· Then Take off the windshield wiper module.

· Raise the front of the vehicle using a jack.

· Then from underneath the vehicle remove the drive belt splash shield .

· Locate the power steering pump bracket and--working from underneath the car--loosen the through bolt; then remove the pressure hose routing bracket.

· Place a catch pan on the floor, underneath the power steering pump fluid reservoir, and siphon as much steering fluid from the tank; then remove the pressure and fluid supply hoses from the pump.

· Take off the rear pump mounting bolt and front mounting bolts through the pulley. Make sure to grab and keep the spacer located between the pump and mounting bracket once you remove the bolts.

· Take the pump and pulley assembly over the aluminum bracket and out of the engine.

Reinstall all parts and new pulley in reverse.

Thanks. keep updated for any more query.you can rate this solution and show your appreciation.

Sep 22, 2010 | 1999 Dodge Caravan

2 Answers

Where is the power steering dipstick


Most power steering pumps are driven by the serpentine belt and should be in plain view when the hood is open.The following shows how to remove and replace the power steering pump and might give you a clue if not in plain sight. My dad's 1998 Ford Taurus has it nearly on top, but they could have changed things in the mean time: Power Steering Pump Removal & Installation Power Steering Pump (2V) To Remove:
  1. Before servicing the vehicle refer to the precautions at the beginning of this section.
  2. Disconnect the battery ground cable.
  3. Remove the accessory drive belt.
  4. Remove the alternator.
  5. Drain and remove the radiator coolant recovery reservoir.
  6. Position a drain pan under the power steering pump underneath the vehicle. Disconnect the hydraulic pressure and return lines and allow to drain.
  7. Remove the idler pulley from the power steering pump support.
  8. Remove the belt tensioner.
  9. Remove the bracket mounting bolt located under the belt tensioner mounting.
  10. Remove two retaining nuts from the bracket mounting studs. Remove both mounting studs, and pull off the power steering pump support with the pump attached.
  11. Clamp the pump support bracket in a suitable vise.
  12. Remove the power steering pump pulley from the pump shaft using Pump Pulley Remover T69L-10300-B, or equivalent. Remove the three bolts retaining the power steering pump to the power steering pump support and remove the power steering pump.
To Install:
NOTE: The pulley must be installed within 0.010 in (0.25 mm) flush with the power steering pump shaft.
Power steering pump special tools ford-08-00-401.gif

  1. Install the power steering pump to the power steering pump support. Tighten the mounting bolts to 18 ft-lb. (25 Nm).
  2. Install the power steering pump pulley using Steering Pump Pulley Replacer T65P-3A733-C, or equivalent; the pulley face must be flush within 0.010 inch (0.25mm) of the pump shaft.
  3. Install the power steering pump/pump support and torque nuts/bolt to 24 ft. lbs. (33 Nm).
  4. Install the bracket mounting bolt located under the belt tensioner mounting.
  5. Install the belt tensioner.
  6. Install the idler pulley to the power steering pump support.
  7. Connect the hydraulic pressure and return lines.
  8. Install the radiator coolant recovery reservoir.
  9. Install the alternator.
  10. Install the accessory drive belt.
  11. Fill the power steering reservoir with power steering fluid.
  12. Connect the battery ground cable.
  13. Run the engine and check for leaks and proper operation. Bleed the power steering system if needed.
Power Steering Pump (4V) and SHO To Remove:
  1. Before servicing the vehicle refer to the precautions at the beginning of this section.
  2. Disconnect the battery ground cable.
  3. Remove the accessory drive belt.
  4. Drain and remove the radiator coolant recovery reservoir.
  5. Position a drain pan under the power steering pump. Disconnect the power steering pump reservoir hose and allow it to drain.
  6. Using Pulley Remover T69L-10300-B, or equivalent, remove the pulley from the power steering pump shaft.
  7. Disconnect the pressure hose from the power steering pump and allow it to drain.
  8. Remove the power steering pump retaining bolts and the pump.
To Install:
  1. Install the power steering pump and tighten the bolts 15–22 ft. lbs. (20–30 Nm).
  2. Connect the pressure hose and secure the clamp.
  3. Using a Steering Pump Pulley Replacer T65P-3A733-C, or equivalent, install the power steering pump pulley: the pulley face must be flush with the pump shaft or within 0.010 inch (0.25mm).
  4. Connect the power steering pump reservoir hose.
  5. Install the radiator coolant recovery reservoir.
  6. Install the accessory drive belt.
  7. Fill the power steering reservoir with power steering fluid.
  8. Connect the battery ground cable.
  9. Start the engine and check for leaks and proper operation. Bleed the power steering system if needed.
prev.gif next.gif

Jul 22, 2010 | 1996 Ford Taurus

1 Answer

How to install a power steering pump for a 1997 chrysler seabring conv


Chrysler Cirrus/Stratus/Sebring/Avenger/Breeze 1995-1998
Power Steering Pump - REMOVAL & INSTALLATION

Cirrus, Stratus, Sebring Convertible and Breeze
(see Figures 1, 2, 3 and 4)
  1. Disconnect the negative battery cable from the left strut tower. The ground cable is equipped with an insulator grommet, which should be placed on the stud to prevent the negative battery cable from accidentally grounding.
  2. Siphon as much power steering fluid out of the reservoir as possible.
  3. Raise and safely support the vehicle.
  4. Remove the right front tire and wheel assembly.
  5. Remove the splash shield from the right front wheel well.
c901554.jpg

Fig. 1: Power steering pressure hose attachment to the pump-with Variable-Assist steering

8786c07.jpg

Fig. 2: Power steering pressure hose attachment to the pump-without Variable-Assist steering
  1. Disconnect the power steering pressure hose from the pump.
  2. Remove the hose connection on the power steering pump.
e7733b2.jpg

Fig. 3: Typical power steering pump front bracket attachment
  1. Remove the power steering adjusting bolt.
  2. Remove the power steering pump rear attaching bolt.
  3. If so equipped, remove the Anti-lock Brake System (ABS) hydraulic control unit heat shield.
  4. Remove the wheel speed sensor retainer bracket from the right inner fender.
  5. Remove the wheel speed sensor sealing grommet from the right inner fender.
  6. Disconnect the speed sensor wiring.
  7. Push the wiring through the hole in the inner fender.
If not equipped with anti-lock brakes, the hole will just have a sealing plug.
  1. Remove the bolt attaching the power steering front bracket to the mounting bracket. Access to the bolt is gained through the hole for the speed sensor wiring.
  2. Remove the power steering pump drive belt.
  3. Remove the power steering pump and the front bracket as an assembly.
To install:
  1. Install the power steering pump and bracket.
  2. Reinstall the bolt at the adjusting slot, but do not tighten.
  3. Reinstall the bolt mounting the power steering pump to the rear mounting bracket, but do not tighten.
  4. Reinstall the power steering pump top bolt, but do not tighten.
  5. Reconnect the power steering hoses.
b72b14a.jpg

Fig. 4: Install a new O-ring gasket on the hose fitting
Use a new O-ring when reinstalling the power steering pressure hose.
  1. Reinstall the drive belt.
  2. Adjust the drive belt and tighten the power steering pump bolts to 40 ft. lbs. (54 Nm).
  3. Reinstall the splash shield.
  4. Reinstall the tire and wheel assembly.
  5. Lower the vehicle.
  6. Reconnect the negative battery cable.
  7. Refill the reservoir and bleed the power steering system.


Sebring Coupe and Avenger
  1. Disconnect the negative battery cable.
  2. Remove (drain, suction pump, etc.) as much power steering fluid as possible.
  3. Disconnect the return fluid line. Remove the reservoir cap and allow the return line to drain the fluid from the reservoir. If the fluid is contaminated, disconnect the ignition high tension cable and crank the engine several times to drain the fluid from the gearbox.
Cover any components located underneath the power steering pump with a shop towel to protect them from damage due to power steering fluid spillage. For example, the A/C compressor or alternator, depending on vehicle and engine, is below the power steering pump, so cover the A/C compressor or alternator with a shop towel before removing any hoses.
  1. Loosen (but do not remove) the power steering pump mounting bolts and remove the drive belt.
  2. Remove the pressure switch connector from the side of the pump.
  3. Disconnect the pressure line.
  4. Unbolt and remove the pump from the mounting bracket.
To install:
  1. Clean all parts well. Inspect the pump pulley for cracks. Check the hoses carefully for cracks or signs of weakness.
  2. Install the pump, wrap the belt around the pulley and lightly tighten the mounting bolts.
  3. Replace the O-rings and connect the pressure line. Connect the pressure line so the notch in the fitting aligns and contacts the pump's guide bracket. Tighten the fitting to 13 ft. lbs. (18 Nm).
  4. Connect the return line and secure with the clamp.
  5. Fasten the pressure switch connector.
  6. Adjust the power steering belt for proper tension and tighten the adjusting bolts.
Use only MOPAR ATF PLUS automatic transmission fluid type 7176, ATF+3 automatic transmission fluid, or equivalent, in the power steering system of Sebring coupe and Avenger models.
  1. Refill the reservoir and bleed the power steering system.

Hope this help to solve it (remember comment and rated this). TY for using Fixya.

May 13, 2010 | 1997 Chrysler Sebring

2 Answers

2007 S40 WONT START ''POWER STEERING FAILURE'' CAME ON


The power steering is actually ELECTRIC steering on this car Most common and basically only failure is 2 30 amp fuses in under hood fuse block Only other thing is mechanical and would set a trouble code and sat power steering on your dash. FYI. Jump Starting your car from the +- Terminals found near the FUSE box under the hood, will Blow the Fuses for the Power Steering. Always Jump start your car from the Battery Terminals in the Trunk

Locate the power steering pump and hoses on your vehicle. The power steering pump is located at the front of your engine, near the top of the motor. It will have a black fill cap on it that is labeled "power steering fluid."
1)Clean the outside of the pressurized power steering pump hoses and the power steering pump with clean shop rags to remove any oil deposits. Check the exterior of the lines to identify any signs of steering fluid leakage.
2)Start the motor and turn your steering wheel back and forth several times to cause the pressure in the steering pump to build up. Turn the engine off and recheck the hoses for fluid leaks. Examine the power steering pump for any signs of cracks or damage. If your power steering pump is damaged you need to replace it with a new pump by removing the bolts that hold the pump onto the bracket, taking the pump belt off the pulley and disconnecting the hoses. Replace the power steering pump by reattaching the hoses with a screw clamp and attaching the pump to the bracket. Place the belt around the pump pulley and apply pressure by pulling back on the pump and tightening the belt by using a socket wrench to tighten the bolt on the bracket. You can find a power steering pump for your vehicle at your local automotive.
3)Check the fittings and clamps for any signs of wear or leakage and tighten any loose clamps with a screwdriver. Inspect the hose leading from the power steering pump back into the firewall that leads to the steering wheel. If you find that a leak has developed in the power steering hose that leads to the steering column, consult a mechanic or take your vehicle to a local service center and have an inspection done.
4)Remove damaged power steering hoses by taking the cap off of the power steering pump and then unscrewing the clamp on the hose. Recover draining power steering fluid by placing a clean container below the hose or power steering pump when you loosen the hoses and allow the fluid to drain into the container.
5)Repair power steering hoses where the damaged area is close to the end of the hose by trimming off the affected area with a utility or sharp knife and reattaching the hose with a screw clamp by tightening the clamp with a screwdriver. For damage that is in the middle of the hose or near a section that can't be repaired, replace the hose with a power steering hose that can be purchased from any automotive supply store in your area or online at an automotive supply website, such as the ones listed below in the resources section, and connect the new hose to the power steering pump with a screw clamp.
6)Fill the power steering pump to the proper level with power steering fluid and replace the cap. Start the vehicle motor to test the system. Once you have verified that the power steering system is working properly, shut off the engine.
This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya

Feb 26, 2010 | 2007 Volvo S40 2.4i Sedan

1 Answer

Location of power steering pump


Usually they are located near or part of the power steering reservoir. Look for the cap to fill the power steering with fluid the pump should be underneath.

May 06, 2009 | 1998 Isuzu Rodeo

1 Answer

Removing power steering pump


To replace the power steering pump, proceed as follows:
  1. Disconnect the power steering return hose from the remote reservoir or pump. Allow the fluid to drain from this hose into a drain pan. Discard the used fluid.
  2. Loosen the bracket or belt tension adjusting bolt, and the pump mounting bolt.
  3. Loosen the belt tension until the belt can be removed. On some cars, it is necessary to lift the vehicle on a hoist and gain access to the power steering pump from underneath the vehicle.
  4. Remove the hoses from the pump, and cap the pump fittings and hoses.
  5. Remove the belt tension adjusting bolt and the mounting bolt, and remove the pump.
  6. Check the pump mounting bolts and bolt holes for wear. Worn bolts must be replaced. If the bolt mounting holes in the pump are worn, pump replacement is necessary.
  7. Reverse steps 1 through 5 to install the power steering pump. Tighten the belt as described previously, and tighten the pump mounting and bracket bolts to the manufacturer's specifications. If o-rings are used on the pressure hose, replace the o-rings. Be sure the hoses are not contacting the exhaust manifold, catalytic converter, or exhaust pipe during or after pump replacement.
  8. Fill the pump reservoir with the manufacturer's recommended power steering fluid, and bleed air from the power steering system as described earlier.

Oct 31, 2008 | 1998 Chevrolet Astro

Not finding what you are looking for?
1998 Jeep Grand Cherokee Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...