Question about 2004 Audi TT

Open Question

Gear grinds at high revs when changing from 2nd to 3rd

Hi

when accelerating through the gears gear change from 2nd to 3rd has a grind noise when putting into 3rd ,, this only happens when accelerating or at high revs not when slow driving ,, it happens with other people driving the car so its not just me

any help would be great thanks

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'm hearing a grinding noise when shifting gears in my 97 nissan pathfinder. It's not a full blown grind but just a slight grinding noise. It does it in reverse 1st 2nd 3rd and just started doin it in 4th....


check and/or change the transmission oil. Clutch problems are noticeable in 1st and reverse but as all the rest are syncro controlled you really do not need to use the clutch to change them. just get the engine rpms to match road speed and they will slip in. I am thinking a oil viscosity problem because of the colder weather.

Dec 28, 2014 | Cars & Trucks

1 Answer

04 focus gear stick wedges fron 1st to 2nd gear


Sounds like you have a bad shifter or a bad slave cylinder. Check the fluid in the reservoir and if you're losing some, then you need to see where the leak is coming from. If it's at the slave cylinder, you're in for an expensive repiar.

Mar 04, 2014 | Ford Focus Cars & Trucks

1 Answer

Gears rev to high when changing


try changing your gearbox oil

Nov 26, 2013 | 1995 Toyota Camry

1 Answer

Vw jetta automatic gets stuck between 2nd and 3rd gear, revs but does not accelerate


Time for a complete rebuild of trans

Any slipping & you continue to drive it,
you ruin it,your done

Nov 23, 2012 | Cars & Trucks

1 Answer

Gear box grind


Sounds like the syncro`s.just worn.

Sep 10, 2012 | Cars & Trucks

1 Answer

I was driving to work this morning and was in 3rd gear, went to down shift at a stop sign and its stuck in 3rd gear. 1988 jeep wrangler. It has been grinding the gear for a few weeks now everytime I change...


The 3rd Gear Synchro is worn or damaged, which is why it grinds when you try to upshift or downshift into 3rd gear. When it goes out completely you will have a very hard time shifting into 3rd gear, since the Synchro lines up the gears to make shifts smooth and easy.

Aug 24, 2011 | 1995 Jeep Wrangler

1 Answer

2nd and 3rd gear in transmission make a grinding noise


SOUND LIKE WORN OUT GEARS.GEARS WORN TO A POINT WHERE THEY MESH TOGETHER.INSTEAD MESHING GEARS GRINDING GEARS TEETH WORN WHERE THEY DONT MESH ANYMORE THEY ARE TEETHLESS.

Dec 31, 2010 | 1987 Toyota Pickup

1 Answer

My 2000 vw passat 1.9 TDI manual grinding gears


as 2nd/3rd are the most used gears chances are the syncromesh on both these gears has gone,you need to strip g/box completly/or buy a recon box.

Apr 28, 2010 | 2000 Volkswagen Passat 4Motion

1 Answer

Grinding sound on pressing clutch in at high revs


The grinding sound may be a throw out bearing or the pilot bearing. The sticking throttle problem sounds like a linkage or cable binding up from possibly damage due to the impact from the accident.

Feb 05, 2009 | 2008 Toyota Yaris Sedan

1 Answer

2nd gear crunch


first of all you shouldn't be reving that high to change gears. that's too high. secondly if it's grinding only during the change from 1st to 2nd gear you may have a problem with the gears not being aligned anymore...ie synchronizers worn out, bearings worn out, etc. take to reputable transmission shop to get it diagnosed and repaired. it sounds like the synchronizers are a problem there. and you may have metal in your fluid now that it's been grinding which will affect the rest of the transmission. if you are speed shifting as in racing, you are not doing your transmission any good. you probably don't have a transmission built to do that if it's the original factory tranny... meaning you did a major NO NO to your tranny and are tearing it up speed shifting when it isn't built for racing.

Oct 13, 2008 | Hyundai Motor 1996 Elantra

Not finding what you are looking for?
2004 Audi TT Logo

Related Topics:

260 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76673 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14380 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...