Question about 2002 Mitsubishi Eclipse

Open Question

Heat on pass. side but not driver side - 2002 Mitsubishi Eclipse

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Heat is cold when it comes out of the driver side but not passanger side

check temp. blend door actuator its what controls the temp doors to change from hot to cold usually pass. side door breaks on jeep grand cherokee's causing pass. side to be cool,have seen some on drivers side break but not as many

Feb 25, 2013 | Chrysler Sebring Cars & Trucks

1 Answer

1998 catera has no heat on driver side but has heat on pass

The first issue is to reprogram the blend doors for the HVAC system. You can do this yourself by pressing on the Off/On button and the drivers side temperature control knob at the same time for five seconds. Then release the buttons and you should hear the doors moving as the system reprograms itself. Good Luck.

Dec 03, 2010 | 2000 Cadillac Catera

1 Answer

With air on no cool air from drivers side vent only heat,but cool air will come out of is a 1992 735il bmw.

the flapper in the duck is stuck close on that side its under the dash thats how it changes from heat to a/c when u turn the slector switch its a pain to fix

Jul 30, 2010 | 1992 BMW 7 Series

1 Answer

Heat blowing out drivers, but wont get HOT. cold air comin n on pass. side. help me?? antifreeze level is good. 2000 dodge grand caravan SE

Heat IS blowing out on drivers side, BUT it wont get hot ?
As long as you have heat, but not on passenger side, I would say your diverter is door is not operating, may be vacuum , or electrical, check under dash make sure no vacuum lines are leaking.

Feb 04, 2010 | 2000 Dodge Caravan

1 Answer

No heat to very little on drivers side

there is a TSB on this problem,but since it is not a safety issue there will be no recall,here is the TSB number to call your dealer about,TSB 24-004-03.

Jan 30, 2010 | 2004 Dodge Ram 2500

1 Answer


Your truck has blend door actuators that go bad. each side has them . giving you the problem that you have. and in some cases the actual a/c control mod goes bad. Putting the truck on a scanner at the dealer ship they can look at each blend door and comand each one to open and close and find out witch one is not working. or you can buy the pass side blend door actuator / motor the one for the a/c heat blend door and replace your self its not to bad to get to on pass side. you can have them print you out a diagram when you buy it.

May 25, 2009 | 2005 GMC Sierra 2500HD 4WD

1 Answer

Jeep grand cherokee heater

Pass. side blend air door motor is probably bad.

Oct 25, 2008 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
2002 Mitsubishi Eclipse Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides