- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It may be that the speedo and temp are mechanical, whereas the tach and fuel are electrical. Check fuse for inst. cluster for clean and tight fitment. Check electrical connection at back of inst. cluster.
the case you have disconnect on the ground ( brawon coler) inthe claster . all guage have one ground check the braown coler wire but don't remove or disconnect the calster it may lose key prog try disconnect battarry then check from guage bording up to dash bord bracket . try make sure you have no short with any sender ( fuel .tem. or speedo)
You have some wiring problems shorting out that is coming from the dash board so if you or anyone you know how to use a multimeter to check the wireing harnesses plus check any connectors that might be just very touching the connector of dashboard which means a bad connection to dashboard.
there are buttons are not working, the first one which is responsible to operate the four lights togather ( flasher lights ) . the second buttong is responsible to lock the doors . boh of these buttons are located beside the gear stick.
That Cluster will work But, You will have to get an Installation kit if you want the Tach to work. Everything else will hook up the Same. You have a Distribution Box (Fuse Box) Under the Hood on the Drivers Side, There is a Fuse in it for the Speedo. Inside the Cover to the Box is the Fuse Diagram or in the Back of the Owners Manual.