Question about 2004 Buick LeSabre
AC blows warm on driver's side , cool on pass
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 2000 buick lesabre 3800 has
I had same problem on 2000 Lesabre blowing cold on passenger and warm on driver. I fixed it by adding more freon even though it had 28 pounds of preasure. Now it works great!
Posted on May 22, 2009
there are two a/c lines that run down the fire wall under the van to the rear.right around the bottom of the fire wall the is a connection point on both lines. you will find a leak there .replace the orings and recharge system. also you will need two specail toyota tools to release the couplings.i have done this repair on several sienna's. let me know if this helps.
Posted on Jun 16, 2009
Yes there is both a door and a flapper you have a problem with a blend door motor, it is not switching to cold it is half open and half closed so you need to replace the motor vacuum motor it is under the dash near the heater on the passenger side and if it is the other motor under dash you will have to take part of the dash apart to get to it, to test buy a piece of vacuum hose 1/8 inch diameter about 3 feet long and you can hook it to each of the vacuum motors and **** on the end of the line to see which one is causing you the problem, also could be the control head for the AC inside the car where the controls are, you have to remove the ac cluster ot get to the vacuum switch it's all vacuum operated and if you pull it out you will be able to here an audible sound of air leaking if it's the switch.
Posted on Jun 17, 2009
SOURCE: 2003 buick lesabre AC problem
You have to find the motor that controls the blend door and open it manually to find out which one is bad there are 3 blend doors on the HV/AC system one will be where the heater core is. The other will be between the vented air and AC? heating system then the third door will operate vents in dash and defrost condition. If you have someone operate them AC system heating system and watch the blend door motors, the one you find not moving will be the one that has the problem. They have vacuum and electrical motors, if it is a acuum motor you can move the door manually with your hand, if it's electric you will have to disconnect the rod by removing the pinch clip off of the rod.
Posted on Jul 10, 2009
Tips for a great answer:
Jul 17, 2017 | Buick Cars & Trucks
Apr 06, 2016 | 2003 Buick LeSabre
Jul 11, 2012 | 2004 Buick LeSabre
Apr 04, 2010 | 2001 Buick LeSabre
Aug 09, 2009 | 2004 Buick LeSabre
Jul 26, 2009 | 2000 Buick LeSabre
Jun 21, 2009 | 2000 Buick LeSabre
Jun 01, 2009 | 2001 Buick LeSabre
Jul 31, 2017 | 1999 Buick Century
Jul 30, 2008 | 2001 Buick LeSabre
280 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: