Question about 1996 Nissan Quest

2 Answers

Two left side front wheel studs nuts broken.

Two left side front wheel studs broken. I need to know if they are replaceable or need a whole piece part. If so what part do I need. Please help. Thanks.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 496 Answers

Hi,
I see that Autozone sells the rotor, but it doesn't include the lugs. My guess is that you can try an auto parts store and ask specifically for the lugs, or certainly a Nissan dealer parts department could help you.
Hope this helps... Good luck!

Posted on Sep 25, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,187 Answers

They are replaceable.
You can knock the broken studs out with a point chisel (wear safety glasses). Take the pieces and nut to an auto parts store in order to get the same nut size (don't want to use two tire tools/wrenches).

Posted on Sep 25, 2009

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Two Broken Wheel Studs on Front Driver's Side

It would be best to have the work carried out at a garage of your choice. A garage you have used before and trust to do a good job. Depending how long it takes to free the studs, will depend on the final price.

Posted on Dec 01, 2008

cadman000
  • 607 Answers

SOURCE: I am trying to replace

With adrift punch. bang out broken stud from huB. Will take some severe hammerering, so using a heavy short handle sledge is advised. Now place the new stud into the hub hole. Put the lug nut on , TIGHTEN ( preferablly with an air impact gun ) as tight as you can till the stud bottoms out. Then you're done. Hope this helps

Posted on May 09, 2009

  • 22 Answers

SOURCE: 2003 hyundai elantra gls front wheel stud broke

grab a large punch and hammer and knock out the old broken one. Push the new one in and re tighten. This will pull it into place and because it has splines it should not spin while doing so.

Posted on Jun 10, 2009

Testimonial: "excellent advice"

  • 112 Answers

SOURCE: broken stud on left front wheel

Remove: wheel, brake caliper & rotor. Drive out the remaining stub with a hammer and punch. Insert a new stud and pull it into place by tightening the lug nut. Before running out of threads, remove the nut, insert a stack of washers or a large nut which slips over the threads without contacting them, tighten the lug nut to seat the stud.

Posted on Jul 12, 2009

  • 39 Answers

SOURCE: Front wheel stud replacement for a 2006 Hyundai Sonata GL.

grind a flat spot on the round head of the new stud this should give enough clearance to install it. don't pull the hub this will damage the bearing.

Posted on Oct 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace front wheel studs on 2011 Kia Forte


If you can find just the studs and not have to buy the whole hub assembly, screw a lug nut on flush to the stud and drive it out with a hammer, make sure its in a position to have room on the back side. Put in new stud and with a few spacers tighten a lug nut to seat it.

Aug 15, 2014 | Cars & Trucks

1 Answer

Broken wheel nut


If the stud is OK then you can check with a car parts store to see if they have a tool for removing seized lug nuts. If the stud is broken you will need a shop to either replace the stud (if it is serviceable separately) or replace the hub.

Dec 25, 2011 | 2000 Volvo S40

1 Answer

Need to remove the rear hub on a 2006 T&C van to replace a lug that broke. It has drum brakes. I have a new lug & nut. Wondering if I need to buy a whole new hub or not? Also, do I need to remove a...


all you need to do is remove wheel and brake drum..hit broken stud with a hammer and drive it out of hub..turn hub so the piece won't come against the brake components..install the new stud by using a another nut and some washers..a regular open ended wheel nut works best,turn it around so flat side is against washers..make sure it fully seats in hub..reinstall drum and wheel and tighten to spec..100ft lbs..i hope this helps

Mar 29, 2010 | 2006 Chrysler Town & Country

1 Answer

Need to replace broken front driver side wheel stud on 04 impala - seems like i have to remove hub to make room to push stud through? can someone confirm? if so, how do i get hub off - is it just a matter...


in the perfect world you are to remove the hub and bearing assembly and yes you would take the axle nut off,but when you are paid flat rate as a mechanic you must beat factory quoted time to make money,so with that said,
remove the wheel after car is jacked up and blocked,
punch the broken stud back thru,
take your new stud and find a place that has a bench grinder if you don't have one,
grind a piece of the head off so it looks like a piece of pie and you can then slide it right in and haven't touched the spline that secures it,then you need an air gun and spacer to pull the stud in tight.

Jan 21, 2010 | 2004 Chevrolet Impala

1 Answer

Have broken studs on the front passenger side and need to know how to replace.


I assume that you are referring to the wheel studs and if so you will have to remove the wheel, the brake caliper, the brake caliper stand and the brake rotor. Drive the old stud out with a hammer. Make sure you purchase new lug nuts with the studs. If they are the acorn style, buy one that is not to help with installation. Slide the new stud in the hole from the rear of the flange, install some washers for clearance of the stud shoulder. Install the non acorn style lug nut on the stud backwards. Using a impact gun, pull the stud through. Remove the backwards lug nut and washers.

Jul 26, 2009 | 1989 Nissan Maxima

1 Answer

Broken lug nut stud on 98 civic dx coupe


knock it out... use an old nut that will fit the new stud and install the stud. the nut will pull the stud in tight to the flange.

Jul 19, 2009 | 1998 Honda Civic

1 Answer

Broken stud on left front wheel


Remove: wheel, brake caliper & rotor. Drive out the remaining stub with a hammer and punch. Insert a new stud and pull it into place by tightening the lug nut. Before running out of threads, remove the nut, insert a stack of washers or a large nut which slips over the threads without contacting them, tighten the lug nut to seat the stud.

Jul 12, 2009 | 2001 Pontiac Sunfire

1 Answer

Broke stud on front left side


Yes you can replace the broken wheel stud. The wheel studs are pressed into place, and a vise will work to press it out, and in. You will have to remove the wheel hub, and then use a deep well socket and a bolt or something smaller than the actual stud to remove it with a vise. To replace it, you will need to use the deep well socket on the thread side of the stud, and press the new one in with the vise.

I hope this helps you, and I wish you luck with your repair.

Apr 25, 2009 | 2003 Pontiac Sunfire

2 Answers

Broken wheel stud front left 1992 honda accord


Only if there is an Acsess Hole Directly Behind the STUD'S PUNCH THE Broken SHORT one OUT But there May Not Be Enough ROOM FOR the NEW LONG STUD to go in between the HUB & Rotor Check this FIRST If you see GOOD CLEARANCE TO GET The new STUD in Then just Drive the old one out , and Use A LARGER than Stud Nut Or Washers to Pull New Stud Threw some Before Putting Wheel on. Then Put Wheel on And Tighten Wheel , Retorque after a Few Hundred Miles.

Mar 29, 2009 | 1992 Honda Accord

Not finding what you are looking for?
1996 Nissan Quest Logo

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...