Question about 1996 Jeep Cherokee

2 Answers

I took off all the sprak plug wires and i don't

I took off all the sprak plug wires on my 1996 jeep cherokee classic and i don't remember which way they go on the distributer cap

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 159 Answers

Take the number 1 plug out and rotate engine to tdc on compression stroke and where the tip of the rotor button sits is number 1 wire and follow the firing order from there going in a clock wise cirlce on the cap the firing order should be marked on the intake somewhere.
But anything more precise I would need to know what engine.

Posted on Sep 27, 2009

What engine? Why wouldn't you use a pen or sharpy to mark the wires with the cylinder number as you removed them. Next time make a schetch of the dist cap and put numbers on it. If you do not know the firing order make you own number system till you get that info. Of coarse do it before you remove stuff.Go into a dealership or local repair shop and get a tech off to the side to help you.

Posted on Sep 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Spark plug gap for 1996 jeep cherokee


Thread Grand Cherokke, but ask about Cherokee ???

Make: JEEP
Model: GRAND CHEROKEE - LIMITED
Year: 1996
Engine: V8 - 5.2L - FI - - GAS
Part Number RC12YC
GAP .035" (Original Equipment Manufacturer and/or Original Equipment Equivalent)

Engine: L6 - 4.0L - FI - - GAS
Part Number RC12YC
GAP .035" (Original Equipment Manufacturer and/or Original Equipment Equivalent)


Make:
JEEP
Model: CHEROKEE
Year: 1996
Engine: L6 - 4.0L - FI - - GAS
Part Number RC12LYC
GAP .035" (Original Equipment Manufacturer and/or Original Equipment Equivalent)


Hope this helps (remember to rate this free answer ans leave some testimonial).

Sep 27, 2011 | 1997 Jeep Grand Cherokee

2 Answers

Need to know or see a pic of 1996 jeep cherokee sport spark plug and wiring lay out wires all mixed up


1996 Jeep Cherokee 4.0 liter L6 VIN "S"

zjlimited_362.gif



1996 Jeep Cherokee 2.5 liter L4 VIN "P"

zjlimited_363.gif


Hope helps (remember to rate this answer)..

May 11, 2011 | 1996 Jeep Cherokee Sport

2 Answers

How to replace spark plugs on 2000 jeep cherokee classic 6 cyl.? Also does 2000 cherokee have inline fuel filter?


TO REPLACE SPARK PLUGS YOU REMOVE COIL PACK MOUNTING BOLTS THEN REMOVE THE COIL PACK WITH BOOT OVER THE SPARK PLUG.YOU HAVE 6 INDIVIDUAL COIL PACK TO EACH CYLINDER. YOU NEED A 3/8 RATCHET WRENCH - LONG 3/8 EXTENSION -SPARK PLUG SOCKET - SPARK PLUG GAUGE.AND TORQUE WRENCH.THE 2000 MODEL JEEPS FUEL FILTER INSIDE THE TANK.1993 - 1996 MODEL JEEPS FUEL FILTER LOCATED LEFT SIDE OF THE VECHICLE NEAR THE FUEL TANK.

Jul 20, 2010 | 2000 Jeep Grand Cherokee

1 Answer

How to fine the sprak plugs


at the end of the plug wires. any other ? I'd be glad to help...

Mar 22, 2010 | 1999 Jeep Grand Cherokee

1 Answer

I have a 1995 jeep cherokee grand classic and my reversing lights wont work. have checked bulbs and fuses bob


Review the wiring conections or a broke wire and help with the wiring diagrams:
- ZJ-Secc-8L-Lamps
- ZJ-Secc-8W-Wiring-Diagrams

Good luck (remember rated this help)

Aug 26, 2009 | 1995 Jeep Grand Cherokee

1 Answer

My 1996 Jeep Cherokee does not get spark even with a new coil


crank shaft senor dead ..driver side around the bell housing ..very small ..50 to 100 $

Jul 18, 2009 | 1996 Jeep Cherokee

1 Answer

1996 JEEP SAYS ITS MISS FIRIENG ON ALL 6 CYL.


your timings off, if its a straight six the distributor is on the left side of your engine, if its a v 6 i think its on the intake manifold
but your definitly out of time!

Jun 24, 2009 | 1996 Jeep Grand Cherokee

1 Answer

1996 Jeep Cherokee Classic headlight problem


THERE IS A WIRING PLUG REMOVE BOTTOM OF LOWER PLASTIC COVER PUSH IT BACK UP

Jan 18, 2009 | 1996 Jeep Cherokee Country

1 Answer

Wiring diagram for the o2 senser


I own a 96 jeep cherokee classic and about 12 months ago had similar problem, I managed to find a manual  for sale. Contact your local auto shop and see if they sell a manual for it.
(also try local library as some stock these books for you to borrow or photocopy.)
brand name:  Haynes

name of book:

jeep cherokee
1984 thru 2000
cherokee, wagoneer, comanche and country
Haynes Repair Manual bk no: 50010
Based on a complete teardown and rebuild
cost approx. $40 AU

they have complete wiring diagrams in rear of book

Since buying book husband does 90% of our work himself

Highly recommend
PS: you have good taste in vehicle choice.

Sep 17, 2008 | 1996 Jeep Cherokee Country

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7689 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...