Question about 1999 Honda Civic

Open Question

Tappet settings for hoda civic 1.8 dohc - 1999 Honda Civic

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Tappet gap on 1.6 2003 vtec civic

The firing order is 1-3-4-2. The gap is listed on the emission information sticker under the hood. This sticker will have lots of info which includes valve lash. It will be listed in millimeters, example: 0.22 +/- .02mm. Some feeler gauges list both standard and mm measurements, otherwise a conversion can be found without much trouble. This procedure should be done while the engine is cold to get the best results.

Feb 18, 2015 | 2003 Honda Civic

1 Answer

1998 hoda civic dx hesitates

to chech and see if all the spark plug is working -- engine does not miss , or any vacume hose fall off . also your fuel filter is good \

Jul 26, 2010 | 1998 Honda Civic

1 Answer

Where is the main reley located on a 1994 hoda civic del sol

I think main(fuel pump) relay on all Honda's located under the dash , driver side , if you look from under the dash it's close to the fender but deep , very hard to reach , small hands will do.

Apr 29, 2010 | 1994 Honda Civic Del Sol

1 Answer

I need radio code for 2001 hoda civic

Have you checked the original owners manual? Had this happen with my CRV. The number will be a 5 digit number and will probably be written in the information at the very front of the manual. Try any 5 digit numbers that you see there. Thats how I got mine working again. Good luck.

Sep 26, 2009 | 2001 Honda Civic

1 Answer

What to torque head gasket bolts on on 1996 hoda civic

Make sure the bolts are properly lubricated, the threads and the bolt heads, hand tighten all the bolts, use the crisscross method below starting in the center and working your way outward. tighten to 22 ft lbs tighten to 61 ft lbs
X X X X X 8 6 2 4 10 X X X X X 9 3 1 5 7

Sep 20, 2009 | 1996 Honda Civic

1 Answer

88 hoda civic i have i probem to pass smog

autozone usuall ycan do most diagnostics for free.

Dec 31, 2008 | 1988 Honda Civic 2 Door

1 Answer

Cylinder head

depends on engine code, and single cam or twin cam. check your code. D16W4 sohc stage 1. 29nm stage 2 72nm. D16Y5. stage 1 20nm. 2. 49nm. 3.67nm . 4. 67nm. there are 2 other codes for sohc engines these are the same as D16W4. DOHC engine as follows B16A2 stage 1. 29nm. 2. 83nm. hope this helps, if you are ot sure give m the exact engine code and i can verify.

Sep 05, 2008 | 1995 Honda Civic

1 Answer

Tappet settings

depends on the engine

Jun 30, 2008 | 1995 Honda Civic

Not finding what you are looking for?
1999 Honda Civic Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts


Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides