Question about 2001 Chrysler Town & Country
All the fuses just pull out you may need a pair of needle nose pliers to grab the bad one but they all just pull straight out
Posted on Sep 26, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Where is the factory amp
The amp relay is in the Relay/Fuse box located under the hood. The amp relay is the one labeled NBS which stands for Name Brand Speakers.
If you are trying to install an after market radio in a 2001 Chrysler Town and Country, you may notice that no sound comes from the speakers. This is because the single wire that is connected to the factory radio sends a signal to the Bus which tells the relay to turn on - powering the factory amp.
I bypass this by running a wire from the red Acc power wire on the radio to the relay. Connect the wire to pin number 87 on the relay. When standing in front of and facing the van, pin number 87 is the pin, on the NBS relay, which is closest to you and furtherst right.
Are you looking to replace the amplifier? or bypass the speaker wires??
Usually factory amplifiers in vans are under the P/S Front seat. However they can be up under the dash as well (P/S).
If you're looking for it because it is not turning on - check the relay (as above).
Thanks for using FixYa - a FixYa rating is appreciated!
Posted on Jan 31, 2009
the relay is located in the power distribution box under the hood the relay will be a square black or gray cube just pull out and make sure you rerplace it with the same type relay. refer to your owners manual for any questions regarding the fuses and relays
Posted on May 08, 2009
encrypted software ,dealer only----yes i know you are showing a reading but it doesnt mean anything or if it does it shows a different code .so your snap on or mac tools scanner is a waste of time and money.Nearly all new motors from 2005 are using encrypted software to stop general mechanics like me from working
Posted on Sep 12, 2009
Tips for a great answer:
Apr 23, 2015 | 2001 Chrysler Town & Country
Jan 15, 2014 | 2001 Chrysler Town & Country
Sep 23, 2012 | 2001 Chrysler Town & Country
Jul 19, 2010 | 2001 Chrysler Town & Country
Mar 23, 2010 | 2006 Chrysler Town & Country
Feb 19, 2010 | 2001 Chrysler Town & Country
Dec 07, 2009 | 2001 Chrysler Town & Country
Aug 22, 2009 | 2001 Chrysler Town & Country
Jul 16, 2009 | 2001 Chrysler Town & Country
Jul 08, 2009 | 2001 Chrysler Town & Country
100 people viewed this question
Usually answered in minutes!