Question about 1998 Mazda 626

1 Answer

HOW DO I BLEED A RADIATOR ON A MAZDA 626 - 1998 Mazda 626

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 34 Answers

Some vehicles have a bleed valve at the thermostat. If you can not find one I recommend having it vacuum filled, that is how our shop does it. If you can not afford to have that done and you can not find the bleed valve then this will help. Fill your radiator. Starting with the lower hose and squeeze the hose until you see no more bubbles coming out of radiator or radiator tank. A RADIATOR TANK IS NOT THE SAME AS AN OVERFLOW TANK. Do this slowly until no more bubbles come to the top. Do this with the top hoses, heater hoses, ect... Drive vehicle until at operating temp, then allow to fully cool and check coolant level in radiator and radiator tank. Repeat.

Posted on Sep 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mazda 626 is overheating. changed the thermostat twice in 10 weeks Both fans are working;increase temp when Accelerating.tried to bleed air from the system but this model doesn't have a bleed valve.


is coolant circulating in motor/radiator? does radiator top hose get hot when engine has been warmed up? might be water pump, not thermostat. and you do have plenty of antifreeze/coolant in radiator I'm sure.

Aug 25, 2015 | Mazda Cars & Trucks

1 Answer

How donu bleed the fuel on a 2000 Mazda 626 lx 2.0


You don't bleed the fuel. You have a fuel pressure regulator on the fuel rail that does this for you. Turn the key on 3 or 4 times. this builds up pressure. Try to start the car. If it does start, check fuel pressure. Check to hear if the pump is coming on.

Jan 03, 2015 | 2000 Mazda 626

1 Answer

My 1999 mazda 626 started overheating. we have changed thermostat, flushed radiator, and it will only drive about 20 miles before it pegs the temp guage. Now it will not start.


Did you bleed the air from the cooling system as required in any cooling system drain out or service?? If not the engine will overheat.

Jul 24, 2012 | 1999 Mazda 626

1 Answer

Mazda 626 2001 overheating


check the radiator fan , maybe dont work

Jun 13, 2017 | 2001 Mazda 626

1 Answer

My 94 mazda 626 lx dumped radiator fluid on the ground i believe that its the water pump but dont know where it is or how to change it


Broken water-pump don't dump water when they are bad. They leak bit-by-bit through their bleed holes. You may have a broken hose. You may test the leaking again with plain water, and while the engine is running open the hood and see where the leak is coming from.
If your water-pump is out, you will have to replace it togethet with the timing-belt. And it would be best to get the Haneys repair manual which is more detailed for this job. The water-pump is bolted to the engine side, protected by black plastic covers.

Nov 18, 2009 | 1994 Mazda 626

2 Answers

Where is the thermostat located in my 1995 mazda 626


The thermostat is located on the engine block, where the upper radiator hose connects to the engine. You'll see a large elbow-like component that is attached to the engine with 2 bolts.
Just follow that upper radiator hose and you got the location. When you remove that housing (elbow-like component), you'll see the thermostat.
Make sure you note which end of the thermostat is up and which end is down. Don't reverse the install.

Oct 10, 2009 | 1995 Mazda 626

1 Answer

Radiator fan not working


radiator fan not working on mazda 626 1998

Apr 03, 2009 | 1998 Mazda 626

1 Answer

I cannot find themostat on 1994 mazda 626 2.5liter v6 engine


The thermostat is located on the front left of the motor facing the radiator(Almost directly below the radiator cap). The lower radiator hose is attached to the thermostat housing.

Mar 21, 2009 | 1994 Mazda 626

1 Answer

Procedure for bleeding the hydraulic braking system


doesnt matter where you start. depends how long this took place. maybe start up front and save yourself some headache. That might cure it and you wont have to bleed the backs.

Mar 09, 2009 | 2001 Mazda 626

1 Answer

94' mazda 626


The upper radiator hose runs into the thermostat housing. Remove the front of the housing and you will find the thermostat.

Jan 23, 2009 | 1994 Mazda 626

Not finding what you are looking for?
1998 Mazda 626 Logo

Related Topics:

508 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...