Question about 2004 Jeep Liberty

1 Answer

2000 grand cherokee just dies going down the road. no warning no fault codes.what are the possible causes

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 159 Answers

No stumbling first? sounds ignition related check all the plug ins on ign system I assume it always starts right back up ok? sounds like either crank or cam sensor,if I had to guess it would be crank first but next time it dies try restarting right away without shutting key off first and let the engine crank for about 30-40 sec if it don;t start it should set a dtc which will tell you either crank or cam sensor but it will start happening more often until one day it just wont restart again.

Posted on Sep 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1999 Jeep Grand Cherokee limited,V8 Quadra-trac which dies on the road; dash gauges drop; "no key" lite displays on dash. Restarts after cools. Two codes P 0443 and 0308 are showing? help


code p 0443 refers to evaporative emission (EVAP) canister purge valve ---circuit malfunction====causes ---wiring--- EVAP canister purge valve ---ECM
code p0308 refers to cylinder 8 ---misfire detected ====causes ---engine mechanical fault ---wiring----ignition/ fuel system--- injector---ECT/MAF sensor---ECM
I am thinking here that it restarts , not after cooling , but after the vacuum in the fuel tank has lessened and allowed fuel to be pumped to the injectors and the fuel pressure is re-established
if that is the case then a weak injector or partially blocked injector will misfire under those conditions
I would fix the purge valve so that the tank vents properly and the rest may go away

Feb 18, 2017 | 1999 Jeep Grand Cherokee Limited

1 Answer

2002 Jeep Grand Cherokee Limited P0846 code



Trouble Code: P0846

A/T 2/4 Pressure Switch Circuit Malfunction
Possible Causes:


2/4 pressure is incorrect, or internal transmission faults exist 2/4 pressure switch circuit is open, shorted to ground or power 2/4 pressure switch is damaged or it has failed TCM relay power circuit to L/R switch is open (loss of B+) PCM/TCM has failed

May 16, 2012 | 2000 Jeep Grand Cherokee

1 Answer

2000 jeep grand cherokee laredo showing code p1686, p1687, p1688, geuges go down, all warning lights come on, with time, the geuges comes on, and the warning lights come off, all but the security key...


Diagnostic Fault Code (DTC) P1686 has a generic description of "No SKIM Bus Nessage Received".
Diagnostic Fault Code (DTC) P1687 has a generic description of "No Instrument Cluster Bus Message"

P1688 is either not a valid code for your vehicle, or the manufacturer failed to provide specific information for it.
Basically, what is going on here is that you have a problem in your computer network communication bus. Or to put it more simply, the "phone line" is down. Your computers in your vehicle are having problems talking to each other.

"SKIM" stands for Sentury Key Imobilizer Module (AKA security module). The Instrument cluster and the SKIM are not communicating with the Powertrain Control Module (PCM) for sure, and possibly also not communicating with the Body Control Module (BCM). There may also be problems with other modules that share the same data lines.
This MUST be diagnosed with a scan tool that can access the entire computer network. You must find out which modules can communicate with the scanner and which ones cannot. This is necessary to determine the possible location of the fault.

Nov 07, 2011 | 1999 Jeep Cherokee

1 Answer

I have a 2000 ford windstar that I bought last monday, it died last tuesday. go figure. I was driving down the road and it just died with no warning at all just stopped. I had it towed then the next day go...


You have O2 Sensor Codes

I believe you have a bad fuel pump,
thus low pressure and the O2 Sensors,
set a lean fault code

Check fuel pressure at the rail when you turn
the key to start or it is running

Changing spark plugs is something that
never has to be done to find out what issues
you have.
You could throw away a couple and it should start

Also NO Parts EVER get Changed until
TESTED and found to be bad

Mar 09, 2011 | 2000 Ford Windstar

1 Answer

2000 Jeep Grand Cherokee Larado


pumping the gas pedal does nothing but open a butterfly to give air to the engine, possible that the pump you got is bad or the fuel pressure regulator is bad , its part of the assembly

Sep 01, 2009 | 2001 Jeep Grand Cherokee

1 Answer

98 jeep grand cherokee dies and starts back


replace the crank angle sensor and this should cure your problem

Aug 08, 2009 | 1998 Jeep Cherokee

1 Answer

Jeep will just die going down doad or will not start, had a code that read camchaft sensor replaced that still the same, now i have a code that reads injector circuit malfunction i mhave changed fuel


That sounds like a bad grounding wire, or possible PCM malfunction. Check all engine wiring harness locations for any corrosion or damage. let me know what engine type you have, and I could look up the wiring schematics

Apr 25, 2009 | 2000 Jeep Grand Cherokee

2 Answers

My 2000 Grand Jeep Cherokee cuts off while i'm driving and it gives no kind of sign when it cuts off....


thanks for more info replace the crank sensor it is breaking down when hot once it cools off it will work again .when they go bad the heat from the engine will break down the sensor

Feb 22, 2009 | 2001 Jeep Grand Cherokee

3 Answers

2000 jeep grand cherokee, lost power in windows and locks


http://www.wjjeeps.com/fuses.htm, hopefully this works if you change the fuses and you havent resolved your problem then i would take it to a mech

Dec 19, 2008 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
2004 Jeep Liberty Logo

212 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...