Question about 2003 Mitsubishi Outlander

2 Answers

What kind of rear breaks do I need on my 2003 mitsubishi outlander

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 496 Answers

Hi,
Whether 2 WD or 4 WD, you have brake shoes.
They cost about $58 for a set (both rear wheels) at Autozone.
Hope this helps...

Posted on Sep 25, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 3,267 Answers

The rear brakes are the same drum & brake shoe type.
Each rear wheel has a brake drum that rotates with the wheel. When the brakes are applied, a brake shoe is forced into contact with the brake drum to slow wheel rotation...........................sodeep

Posted on Sep 25, 2009

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

caw_mentor
  • 1 Answer

SOURCE: 2003 mitsubishi outlander rear tires tilt in

Upper control arm "dogbones" the pillow bushings go, and cause the camber.
http://www.mitsubishi-forums.com/t23095-replacing-bushing-in-rearupper-control-arm.htm

Posted on Jan 27, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sports mode wires broken on 2003 mitsubishi outlander need the order of the wires


I have an '04 Outlander and the wires on the manual shift switch are:

Black - top
Blue - center
Red - bottom

I used small heat shrink tubing on each solder joint to provide better mechanical support and prevent future breaking.

Sep 07, 2013 | 2003 Mitsubishi Outlander

1 Answer

Rear seat on 2003 outlander is stuck in the down position how do i get it to the up position?


http://outlander.net.ru/Vitaly/CHASSIS/03/all_of_car.pdf

I have the same problem. Finally found this repair manual on line.
Pages 52A-27 & 28 give a break down of the seat.
The reclining knob is broken #23. It engages the reclining cable #31.
Look closely at the underside of the knob to see if part of it is broken off and this will indicate we share the same problem.
I've always let go off the knob when reclining the seat, but in the future, I'll be slowly releasing it.

Mar 13, 2011 | 2003 Mitsubishi Outlander

1 Answer

I just need to know what kind of transmission fluid i need to put in. in a Mitsubishi outlander 2003


YOU HAVE TO LOOK IN OWNERS MANUAL OR FACTORY MANUAL IN GLOVE COMPARTMENT.IT WILL TELL YOU WHAT TYPE TRANSMISSION YOUR VECHICLE USE.IF YOU DONT HAVE A OWNERS MANUAL YOU CAN CALL MITSUBISHI SERVICE DEPARTMENT.THEY WILL LOOK IT UP AND TELL YOU.

Mar 04, 2010 | 2007 Mitsubishi Outlander XLS

1 Answer

I want to know what kind of maintenance I shouldbe running on a 160K miles 2003 Outlander. Other than breaks and oil change. Do I have to get the injectors clean or change? Do I have to flush the break...


There are shops that will do a complete package deal. You might be cheaper in do one of those. It is recomended to do all the maintanence, you have to look at it this way, An ounce of prevention is a pound of cure.

Feb 09, 2010 | 2003 Mitsubishi Outlander

4 Answers

2003 mitsubishi outlander rear tires tilt in


Had a similar problem with a different car. Rear struts / spings were worn. Caused rear to sag enough to push wheels out and wear out inside portion of tires.

Dec 13, 2009 | 2003 Mitsubishi Outlander

1 Answer

2003 Mitsubishi Outlander


it might be blocked remove the hose and press the lever for the sprayer if water comes the jet is blocked. if this helps please rate

Nov 21, 2008 | 2003 Mitsubishi Outlander

2 Answers

I need to replace a brake light on my 2003 Mitsubishi Outlander. We've removed the two obvious screws but are still facing resistance on the other side of the cover. Should I just pull the unit off? ...


sometimes they would be sideways. the screws just hold them in order not to move and they do have plastics hooks that still hold it tight to the metal housing. slowly slide them sideways and see if they would come off.

tnx 4 using fixya,

drcool

Oct 05, 2008 | 2003 Mitsubishi Outlander

Not finding what you are looking for?
2003 Mitsubishi Outlander Logo

Related Topics:

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...