Question about 1998 Dodge Durango

1 Answer

Bad nock but still has lots of power

Bad nock but still has lots of power

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 523 Answers

If it has a true knock it could be a spun bearing or piston wrist-pin,this being the case you'll need to get in to the motor. One way to locate the issue, as to what cylinder, is to run the engine at idle in park with E-brake on; remove and replace one at a time the spark plug boots. If you find by removing one boot from a plug and the knock sound drops out this could most likely be the cylinder at issue. I hope this may have helped,

Posted on Sep 25, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Yes i have a 2003 dodge durango it is lossing a lot of power and has a nock by the intake manifold

Catalyst possibly
check spark and timing
although it sounds low on oil and the catalyst probably heating thing up under the hood.

Nov 05, 2016 | 2003 Dodge Durango

1 Answer

Loud nocking noise

we had this problem with a crown vic,we thought it was a rod knock but it was a cat converter that was going bad

Dec 05, 2012 | 1997 Ford Crown Victoria

1 Answer

Heavy nocking sounds like conecting rod loose or broke

There is nothing to be done except replace the engine.

Jul 13, 2012 | Cars & Trucks

1 Answer

Have 02 ram with 4.7 magnum.......i have loud knock on drivers side down low was pulling a trailer on cruize control at 120km and went about 10 km in passing gear when i let off cruize is when nocking...

could be a piece of that spark plug is embeded in the piston causing it to hit the head on the upstroke.detonation is the cause of the plug failure and must also be addesed. posible lean mix on that cylinder or ignition cross fire.

Jun 07, 2010 | 2004 Dodge Ram 1500

1 Answer

Alternater is nocking i think its goin out or just might need to

Alternator knocking ????is the alternator light on is it charging as is almost impossible to get a knocking out of a alternator and it still charge at the same time.
Start engine ind get a small plastic tube and put it on the alternator and put your ear to it and you should hear the noise real bad.
And you should feel it getting real hot after run for 3 minutes if not its not ALTERNATOR

Oct 05, 2009 | 2004 Scion xB

1 Answer

Lots of very unusaul noises

Sounds like a bad cv joint. Replace the axle on the side making the noise.

Jul 15, 2009 | 1997 Dodge Intrepid

1 Answer

Nocking motor

the motor starts nocking after about ten to fifteen minutes of running.and looks like it is overheating but i do not understand the overheating signals on the dashboard.

Jul 23, 2008 | 2001 Dodge Intrepid

Not finding what you are looking for?
1998 Dodge Durango Logo

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides