Question about 1993 Chevrolet G20

1 Answer

The headlight on my 1993 chevolet g20 van keeps burning out. both sides. only one burns out at a time. takes 3 weeks. if i just run with 1 headlight it lasts forever.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 491 Answers

High voltage or vibration will shorten headlight life.
Are you always using the same brand of headlights?
Maybe switching to another brand will extend the headlight life?

Posted on Sep 25, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have 1993 Chevy van (G20) that has a leak. In efforts to locate the leak in need to simply remove my fan shroud, but it looks as if I need to remove my grille to do that. Is there an easier way to remove...

You have a clutch fan on the water pump. big nut that is about 1&1/4 ". You will have to get a wrech that fits it and hit the wrench with a hammer counter clock wise to remove it. some times these don't come off to easy. keep hitting. Once it is loose it will spin off. you will have to take it out at the same time as the shroud. four bolts hold the shroud on.

Nov 10, 2010 | 1993 Chevrolet G20

1 Answer

My 1990 g20 van went died and now wont fire and headlights will not come on.

check that the battery cables are properly installed, check the battery voltage, visually inspect positive battery cable for a blown fusible link(section of wire designed to burn like a fuse).

Jun 30, 2010 | 1989 Chevrolet G20

1 Answer

Trouble replacing headlight switch

first unplug the wireing harness,on the other side ,the flat side there is a small spring loaded little button you push in and that releases the knob with the shaft then the shaft should come out with the knob,you may need to rotate the shalf to help get it out.

Jan 26, 2010 | 1993 Chevrolet G20

2 Answers

I have a 1994 chevolet conversion van g20 series. the blinkers stay on in the van but do not work on the outside and when the head lights are on do not work at all anyone have any clue as to why?

you have a burnt bulb, put your 4 wayson(safty flashers)walk around the van, if your signal lights are not flashing get a bulb for it .or even autozones will help find them and help you put them in if you never done this before

Jul 05, 2009 | 1994 Chevrolet G20

1 Answer

My 1993 Chevy G20 van stop blowing air from vents

Your blower motor burned out. Usually under the dash board on the passenger side or it could be under the hood on the firewall on the passenger side. Check out Autozones website.

Jun 29, 2009 | 1993 Chevrolet G20

1 Answer

1998 chevolet blazer that burning fuel pump relay

Recommend change out juncktion block that relay fits in,will have internally burnt contacts that you cannot repair.

Jun 18, 2009 | 1998 Chevrolet Blazer

1 Answer

1993 G20 Van- Engine shuts off at highway speeds

some limiters on vehicles shut the car off when your at to high of speeds. its the computerized version of a rev limiter

May 03, 2009 | 1993 Chevrolet G20

1 Answer

A/c wire at compressor of a 1989 chevy g20 3/4 ton van?

No, It is a diode, not a resistor, It is only there to keep voltage spikes from burning up the clutch coil.

Mar 07, 2009 | 1989 Chevrolet G20

1 Answer

Serpentine Belt chevy g20

hardest part is to remember how to rout the belt theres a place u can put a 1/2 inch or 3/8 ratchet on the tensior to make the belt slide offf

Jun 09, 2008 | 1993 Chevrolet G20

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides