Question about 1991 Saturn SC

1 Answer

Remove door panel, 91 saturn - 1991 Saturn SC

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 520 Answers

Remove screws in cup holder ,remove window switch by prying upwards then remove panel by releasing clips circumfrencing the panel with clip release tool or flat screwdriver

Posted on Sep 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove passenger door panel on 2006 saturn vue


Remove arm rest, door handle, pry from the panel snaps and pull up and out.

Dec 30, 2015 | 2008 Saturn VUE

1 Answer

How to remove l slide door inside panel


Inner Door Panel Removal - YouTube

? 3:53
https://www.youtube.com/watch?v=tF5vCjhcyd8
Jan 23, 2008 - Uploaded by richpin06a
Saturn S-series Inner Door Panel Removal. ... Power Window Repair, Window Slider Replacement: Second Generation Saturn S Series. ... Beginners How to for Installing Interior Pre-Hung Doors- Duration: 4:59. ... How To Install Replace Door Panel Jeep Grand Cherokee 99-04 1AAuto.com - Duration: ...

Oct 27, 2015 | 2002 Jeep Grand Cherokee

1 Answer

How to remove front door panel 2008 saturn aura


When you undo the screws, from about five points including the door opener, push the panel up to free from the glass hook.

Aug 26, 2014 | 2008 Saturn Aura XE

1 Answer

Front passager door won't open how do i repair it on a 2006 saturn vue


Take it to a body shop and have them to open it.
without special tools and skills you'll have to remove the door panel to fix it. however removing the door panel requires that you open the door. a shop can likely do this without damaging the door panel. Once the door is opened, then you can remove the panel and repair the problem. likely a broken or disconnect acutator level for the door handles.

May 26, 2014 | 2006 Saturn Vue

1 Answer

How do you get to the windowregulator and motor on a 91 sl2 do you have to go through the speaker hole?


Every Vehivle I've ever owne required removal of the door panel to do such a repair. How to do so is a little different for each car. You should be able to find how in a chiltons manual for your car. They're worth thier weight in gold. Usually involves unsnapping panel clips, removal of a few screws. it's actually quite simple.

Dan

Feb 10, 2012 | 1991 Saturn SL2

1 Answer

How do i remove the inside driver door panel to a 99 saturn sl1 with crank windows my window is stuck down and i cant get the window crank off


the best part about having a Saturn is that you don't need to. have a look and your going to remove the outside panel around the door. the one that's painted the color of the car. the panels in thees are easily replaced and removed and this will allow access to windows. (kinda crazy and different than any other make but Saturn knows what makes seance and did it well.

Nov 17, 2010 | 1999 Saturn SL

1 Answer

How do you remove the inside door panel backseat right side of a mercury grand marque 1996


Door Panels REMOVAL & INSTALLATION 1989–91 Vehicles
  1. Disconnect the negative battery cable.
  2. On 1990–91 vehicles, remove the speaker grille.
  3. Remove the retaining screws from the door inside handle cup.
  4. If equipped with armrest courtesy lamps, remove the lens, detach the bulb and wiring assembly from the pull cup and remove the pull cup.
  5. Working through the pull cup opening, disconnect the remote lock rod from the lock knob.
  6. Remove the retaining screw and the remote mirror bezel nut from the power window regulator housing switch plate, if equipped.
  7. Raise the plate to expose the window switch and power door lock switch and disconnect the switches.
  8. Remove the retaining screws from the armrest finish panel.
  9. Remove the retaining screws from the armrest and remove the armrest.
  10. Using a suitable trim pad removal tool, carefully pry the trim panel plastic push pin retainers from the door inner panel. NOTE: Do not use the trim panel to pry the clips from the door inner panel. Replace any bent, damaged or missing push pins.
  11. Disconnect the radio speaker wiring, if equipped.
  12. Remove the trim panel and watershield. To install:
  13. If the door panel is to be replaced, transfer the plastic push pins to the new panel. Make sure that the watershield is positioned correctly to the door sheet metal. Remove the door pull handle from the old panel and transfer to the new one.
  14. Position the door panel loosely to the door belt opening and route the wiring harness through the appropriate access holes in the panel.
  15. Connect the radio speaker, if equipped.
  16. Align the plastic push pins on the door panel to the holes in the door sheet metal and press the pins into place.
  17. Install the armrest and route the window regulator, remote mirror cable and power lock harness through the access hole.
  18. Install the armrest finish panel.
  19. Install the power window regulator switch plate housing to the armrest connecting the power window switch, power door lock switch and remote mirror bezel nut, if equipped, prior to securing the retainer screw.
  20. Connect the lock remote rod to the lock knob retainer boss. NOTE: Make sure that the remote rod is fully seated into the retainer boss, then function manually or with the power switch to ensure smooth operation of the lock knob.
  21. Install the bulb and wiring assembly.
  22. Install the lamp lens, if equipped, and the pull cup.
  23. On 1990–91 vehicles, install the speaker grille.
  24. Connect the negative battery cable. Fig. 1: Front door panel — 1990–91 vehicles 84170064.gif
    Fig. 2: Rear door panel — 1989–91 vehicles 84170065.gif
1992–98 Vehicles
  1. Disconnect the negative battery cable.
  2. If removing the driver's door panel, remove the nut from the outside rearview mirror control switch.
  3. Remove the window regulator switch housing by gently prying up, starting at the front. Fig. 3: Front door panel — 1992–98 vehicles 84170066.gif
    Fig. 4: Rear door panel — 1992–98 vehicles 84170067.gif
    Fig. 5: Remove the window regulator switch housing by gently prying up, starting at the front 89600p08.jpg

  4. Detach all connectors from the switch housing.
  5. Remove the door inside handle cup.
  6. Remove the push pin from the door trim panel upper front extension and remove the screw.
  7. Remove the lower self-tapping screw retaining the door trim panel to the door inner panel. Fig. 6: Detach the switch housing electrical connector and remove the housing 89600p09.jpg
    Fig. 7: Remove the door inside handle cup 89600p01.jpg
    Fig. 8: Remove the screws from the door panel in the front and on the upper extension 89600p02.jpg

  8. On Grand Marquis, pry up the screw covers from the door pull handle and remove the screws and handle.
  9. Lift the door panel upward and snap out the panel. Fig. 9: There are also retaining screws located in the map pocket as well as . . . 89600p03.jpg
    Fig. 10: . . . along the bottom edge of the door panel 89600p04.jpg

  10. Disconnect the necessary wire harnesses and remove the panel. To install:
  11. Connect the wire harnesses to the door panel, as necessary.
  12. Install the door panel by pushing in and down until it snaps into place.
  13. Install all self-tapping screws retaining the door trim panel to the door inner panel.
  14. On Grand Marquis, install the door pull handle, tighten the screws and install the screw covers.
  15. Install the push pin covering screw on the panel upper front extension.
  16. Install the inside door handle cup.
  17. Install the window regulator switch housing and install the nut on the outside rearview mirror control switch, if removed.
  18. Connect the negative battery cable. Fig. 11: Lift the door panel upward and snap out the panel to remove it from the door 89600p05.jpg
    Fig. 12: Rotate the door marker lamp bulb and remove it from the door panel 89600p06.jpg
    Fig. 13: Detach the connectors for the trunklid and fuel door release switches 89600p11.jpg
    Fig. 14: Slide the relay connector off of the door panel and remove the door panel from the vehicle 89600p17.jpg
prev.gif next.gif

Aug 26, 2010 | Mercury Grand Marquis Cars & Trucks

1 Answer

How do i remove the door panel on a 99 saturn sl2?


Front door remove the mirror first, from the inside out small panel comes off with a screw and two or three large nuts are exposed.
Both doors remove the exterior door handle, lift it up and you will see
two pins which can be pushed out and then the handle comes off.
Get a star driver and remove ALL the bolts holding the plastic panel onto the door frame.
Lower the window and lift the panel up and away, gently.

Apr 27, 2010 | 1999 Saturn SL

1 Answer

How do you remove the shell from a 1993 saturn sc2


remove the door handle, lift it up and you will see little plastic pins you can pull or push out. take off the mirror, look underneath the interior cosmetic mirror panel and you will find the bolts holding it on. Get a star driver and take out ALL the star head bolts holding the exterior panel onto the door. Lift the panel up and out.

Mar 19, 2010 | 1993 Saturn SL2

1 Answer

How do I remove mt right front door panel and


A saturn is not like other cars you have to remove the outside door panel to get inside the door it has screws holding it on

Jun 24, 2009 | 2000 Saturn L-Series

Not finding what you are looking for?
1991 Saturn SC Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...