Question about Ford F-350

1 Answer

Replaced oil cooler on 6.0 liter ford drove it 200 miles and it died like it ran out of fuel. we run all the tests on the snap-on scanner it passes them all and we checked all of the plug ins to make sure one didnt come unpluged everything is pluged in tight the fuel pressure in line is 50 psi and after the pump it is 1300. so we tried a crank sensore and still nothing. it fires on either. we have run out of ideas does anyone out there know what else to check or try?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same thing and it turned out to be the f.i.c.m.(fuel injector control model) relay in the engine comp. fuse box

Posted on Dec 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I PUT A NEW HIGH PRESSURE OIL PUMP IN MY 6.0 2003 POWERSTROKE IT RAN GOOD FOR TWO WEEKS THEN STARTED RUNNING ROUGH AND THEN DIED


Ford had a lot of problems with this engine. Most diagnosis requires a factory software scanner or one that can interface with the FICM module (fuel injector control module) Now you can perform injector buzz test and glow plug tests. If you can get running then also do a power balance test these test check fuel injectors statically and dynamically with the common rail oil pressure control sensor. These FICM modules are famous failure parts. Napa auto can get them.

Nov 07, 2013 | Ford F-350 Cars & Trucks

2 Answers

Ford 460 loses power then dies. Starts back up. Idles fine.


It sounds like you might have a clogged catalatic converter on the exhaust system.

Apr 23, 2010 | 1999 Ford Super Duty F 450

3 Answers

2002 express 1500 van, will not start


remove dog house locate test port and install guage should be 45-60 psi

Mar 03, 2010 | 2002 Chevrolet Express

1 Answer

2005 Ford F250 Diesal Pickup, 6.0 liter I drove the Truck into the shop and it was running fine.I changed the oil cooler because of oil in the cooling system. I put everthing back together started the...


The primary pump is defective, it has a check valve that is bad so replace the pump it costs $0.00 compared tothe pressure pump thats $900.00 and it will be damaged if let run dry.

Jul 29, 2009 | 2005 Ford F 350 Super Duty

1 Answer

Will not start


Check if fuel or spark problem,..all engines need both to run...use starting fluid in air intake ,..if it runs very shortly-fuel pmp?,,ck for spark at spark plug,work your way back..also ck timing belt-intact? Kev-MN

Nov 30, 2008 | 2000 Ford Ranger SuperCab

2 Answers

Stalls / Dies / dead


this engine fuel pump prassurae low. it fuel pump celan. Your problem sovel

Jul 13, 2008 | 2003 Ford E150

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

607 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...