Question about 2002 Ford SVT Focus

2 Answers

2002 ford focus. need to know where timing marks are to set it.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,353 Answers

There are no marks, special tools are needed when replacing the timing belt.

Posted on Sep 25, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 29 Answers

The 2000 Ford Focus has the Zetec engine, I believe. On the Zetec, the camshaft timing using notches carved out of the REAR end of the camshafts. With the valve cover off, you would need a special tool(we use a metal piece similar to the shape and size of a measuring ruler we all used in k-12 school) to insert into both camshaft rear notches to line up the timing. Other than that just make sure the crank is lined up. Presto!

Note: There are 2 ways those notches can line up, there's "right side up" and "upside down" ... The special tool should ONLY fit into the notches when they are right side up. The thickness of the tool would need to be about 2-3mm(I think).

Good luck!

Posted on Feb 07, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I followed your video step by step setting the timing chain with no marks for the 2002 2.0ltr ford focus it still wont start


ok did you follow the ignition timing and firing order set up correctly
did you turn either the crank or cam shaft/s with out the chain
did you do a compression test to check for bent valves

Oct 25, 2016 | 2002 Ford Focus

1 Answer

Is there a ford focus timing marks single overhead cam diagram


depending on trans and engine mount type the mark my be on flywheel but generally most cars it is located on the belt pulley attached to crank rod, center bottom one on engine block. the timeing mark should be visable from top looking down. if you use a big ratchet to turn over the engine by hand and go slowly, you should see thhe marks pass as you do so.

Aug 14, 2014 | 2002 Ford SVT Focus

1 Answer

Timeing diagram


Here's a timing diagram for a 2002 Ford Focus 2.0 with timing marks.
9_19_2013_4_31_36_pm.gif

Sep 19, 2013 | 2002 Ford Focus

1 Answer

Timing marks for ford focus


http://www.automecanico.com/auto2002/avanzada.html

go and translate to english and see your model and execute.

God bless you

Sep 28, 2012 | 2006 Ford Focus ST

1 Answer

Need to install a timing belt on a 2002 ford focus with a 2 liter zetec engine cant find the timing marks


No marks to align camshafts, set crankshaft at TDC, align camshaft as shown, to align, lobs on cylinder #1 have to be pointing out at 45 deg, on the other end of camshaft's will be a slot on each one insert some thing through both as shown, to hold camshaft's in place.

0cca4f8.gifcb7ba5c.gif

Aug 05, 2010 | 2002 Ford SVT Focus

2 Answers

Diagram for timming belt on 2002 ford focus 2.0ltr


there isnt marks!the cam pulleys have do nothing with timing!remove the valve cover and see in the other end of the camshafts and find two eccentric cuts!turn the crankshaft to the top dead point on the cylinder 1 the two cuts must be in the same line on the upper or lower side.you need aspecial tool to lock the camshafts and another to lock the crankshaft!this is the timing procedure!now you can change anything you want!note!the cam pulleys are conejointed to the camshafts!no marks no pins no safe pins etc.isnt difficult but complicated simple!

Jan 23, 2010 | 2002 Ford SVT Focus

1 Answer

I need to know the timing marks on a 2002 ford focus 2.0 dohc.


If it has a coil pack, and I believe that one does, it si not going to have timing marks. There is no place for you to adjust the timing from. It is all computer controlled.

Sep 10, 2009 | 2002 Ford SVT Focus

1 Answer

Timing mark-specs


ADVISE YOU NOT TO TOUCH THIS UNLESS UR MECHANILLY COMPENENT YOU NEED SPECIAL TIMING PINS & BAR FOR THIS & ARE NOT THE EASIEST TO TIME UP.

Jan 09, 2009 | 2002 Ford SVT Focus

Not finding what you are looking for?
2002 Ford SVT Focus Logo

1,300 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...