Question about 2001 Mitsubishi Montero Sport 4WD

1 Answer

Plenty of battery power, starter checked out okay, turn key and get nothing. Must be a relay I am mssiong somewhere. I checked the fuses on top of engine.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 432 Answers

The switch connected to your key is the ignition switch.It could be worn out.
I hope this helps you.

Posted on Sep 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 87 Pontiac firebird. I got it from a friend and drove it home. I drove it a round town a little then parked it by my house. I went to start it and nothing happened, i thought the battery was dead...


Probably not a fuse. When turning the key to on, does it give indication of power in and power out of the ignition switch-do the warning lights and gauges on the dash turn on?
If the key switch is sending power, next thing to check is the starter motor. You could take it off and have it tested, it and the starter solenoid mounted on the starter, or you could do some quick electrical testing yourself, if you have a test light or multi-meter.

If you pull off the small purple wire to the starter solenoid on the starter, you should check if the wire has power when the key is held in crank position. If it does have power, the starter or solenoid is faulty. If no power on the purple wire in start, then power is lost between the key switch and the solenoid. This part of the start circuit includes the neutral safety switch on the transmission (or the clutch switch if manual transmission), and a starter relay somewhere under the hood. Check the neutral safety switch for continuity in park or neutral. The start wire out of the ignition switch goes to this safety switch, and power is passed on to the starter if gear is in park or neutral.
Not likely the starter relay is bad, but you may need to find and check it, if all else fails.

Dec 10, 2013 | 1987 Pontiac Firebird

1 Answer

I have a 1985 Ford F150 That does not run. Will not turnover & no lights. I have had the alternator & battery checked. Both are good. I have replaced the starter selanoid coil, Ignition coil, starter...


There can be a starter lock-out which requires your to foot press the clutch or the brake pedal. But without lights you have a different problem.

Check your fuse block for power. There is a Master link somewhere under the hood and they usually put them close to the Positive side of the battery. The Master link is like a fuse only in wire form. You will also find a heavy wire that supplies power to the fuse block. Often the fusible link and the feed wire to the fuse block are the same wires.

Your Alternator, battery, etc. will test good all day long, but you need power in the fuse block.

Turn the Ignition to ACC and notice if the radio has power or turn the key to run and notice if the Brake lights work when you press the brakes.

If you have power there, then troubleshoot the wire to the starter relay. Most likely when you turn the ignition key(start) you will not have power going to the starter relay like you should. You can also test the coil Positive wire with the key in RUN position.
It should have power.

That's all I have for you.

Oct 14, 2013 | 1985 Ford F150

1 Answer

Truck wont start


replace battery cables could have bad ground cable.if see dash lights on when turn ignition to on position.check starter fuse or relay or remove starter check for faulty starter solenoid or starter.if starter okay and fuse starter relay okay ignition fuse and switch okay see dash lights could have problem in the theft security system need have vechicle code scan see if theft security fault code show up.

Jan 28, 2013 | 1998 Chevrolet Chevrolet silverado

1 Answer

2007 chevy cobalt ls won't start battery good starter good turn key nothing no click nothing all lites work on dash and radio works jumped starter with screwdriver turns. Over but won't start...


Ignition relay or fuse could be the problem. When you turn the key to start do you hear a fuel pump kicking on and or do you have spark when you hot wire the starter (I know it's hard to check while trying to start it)? You can email me back and I might be able to pinpoint it more.

Jun 06, 2011 | Chevrolet Cobalt Cars & Trucks

1 Answer

Changed starter...new battery....lights and radio work nothing happens when turn the key.


Starter Fuse? Possible failed ignition switch. Loose Cables on battery or starter. Starter not grounding properly. Bad starter Relay? Use Voltmeter check voltage going to main starter wire while someone cranks the motor if not power check power to starter relay while cranking if no power suspect ignition switch.

Sep 06, 2010 | 2001 Chevrolet Venture

1 Answer

Turned ignition on, heard a loud pop and everything went off. tried ignition again, got nothing, no battery turn over, nothing.


Start by checking the fuses and then the battery connections, this sounds like a fuse poped maybe a main fuse, if its a fuse then replace the fuse if it pops again then theres a dead short somewhere, these are famous for bad starters and starter relays going bad, so see when fuse pops again if its when key is turned on or when you try to crank the motor, if its when cranking then its mostlikely the relay or starter, this main fuses would be in the engine compartment fuses box.

Aug 27, 2010 | 2003 Buick Rendezvous

1 Answer

1999 Camry won't start. Just loud click noise when I turn the key. Cleaned battery acid off battery, but still nothing. What next?


The starter is malfunction at this time. it could also be a ignition issue as well. here is a quick starter test procedure that will help you troubleshoot a bit.

Step 1
Check for 12 volts on the large wire attached to the top terminal on the starter relay. It should have battery voltage. If not, the battery, terminals or wire is bad.


Step 2
Check the small wire on the solenoid for power when the key is in the start position. Remove the small wire on the solenoid and have a helper hold the key in the start position. Check the wire for battery voltage. If there is voltage, the starter is bad. If there is no voltage, replace the wire.


Step 3
Check the fuse in the fuse box under the hood on the left fender well. If it is good, check the relay by pulling it out and checking for power at one terminal with the key off. If there is no power, the problem is in the fuse box between the fuse and the relay. If there is power, have the helper hold the key in the start position once again and check for power at another terminal from the ignition key. If there is power, the relay is bad. If there is no power, the starter circuit is suspect.


Step 4
Check to see if there is power to the neutral safety switch if there is no power at the relay. Use the voltmeter to check for power with the key in start. If there is power going in, check for power going out. If there is no power going in, the security system or ignition switch is suspect. If there is power going in and none coming out, the switch is bad. If there is power coming out, the problem is between the neutral switch and the relay.


Step 5
Remove the cover on the bottom of the steering column. Check the solid yellow wire for power when the key is in the start position. If there is no power, the ignition switch is bad.

Feb 01, 2010 | 1999 Toyota Camry

2 Answers

Wont start, turn key, nothing happens. batteries good


your starter motor is shot you need a new 1

Nov 07, 2009 | 1993 Ford F250

2 Answers

2001 Chrysler Sebring--'no start' and no sound when turn over key


There's a fuse under the hood. It's the relay/ABS fuse (20 amps). You have to pull it out to see if it's blown out. If I remeber correctly, it,s the 3rd or 4th fuse down in the 2nd column of fuses. This supplies power to the relays that control the starter, fuel system, AC, and others.

May 27, 2009 | 2001 Chrysler Sebring

Not finding what you are looking for?
Cars & Trucks Logo

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...