Question about 1987 Ford Crown Victoria
Check the switch, fuse and regulator, cheap on ebay, and window regulator motor faulty. have to take the door apart to get to the regulator. you can test to see the motor is working by unplugging the plug and rig small wire connect from 12v to the the motor by quick touch to the connector contact or use ohms tester.
Posted on Sep 24, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Passenger door module (PDM)
Body control module (BCM)
LR power window switch
RR power window switch
Window up and window down relays in each of the rear passenger window switches
Window lockout switch
Reversible power window motors in each of the doors (circuit breaker protected)
LT DOOR CB 25A (System power for left rear window)
RT DOOR CB 25A (System power for right rear window)
The power window system will operate anytime the retained accessory power (RAP) system is active or when the ignition switch is in the ACCY or ON position.
The DDM contains 4 power window switches which are integral components. Closing any of the normally open, rocker type switches provides the DDM with a request for power window operation. The switches for the 2 front windows have 3 positions Up, Down and Express Down, while the switches for the rear windows have only 2 positions, Up and Down. Each of these switches and their positions is a direct input into the DDM. Upon receiving a request for power window operation, the DDM, transmits a class 2 message indicating the switch and it's changed position.
The PDM contains a single power window switch that is an integral component. Closing of this normally open, rocker switch provides the PDM with a request for the front passenger power window operation. The switch for the front passenger window has 2 positions Up and Down. Each of these switch positions is a direct input to the PDM.
The 2 rear passenger doors have there own switches. Each of the switches contain a power window up and down relay. A switch activation alone can control the up and down functions of the rear windows. However the BCM, upon receiving a class 2 message from the DDM, can control the set of relays which will activate the rear window motors.
Oct 21, 2016 | 2003 GMC Envoy
Jul 02, 2014 | 2007 Lexus GS300
Dec 06, 2013 | 2005 Honda CR-V
Jul 29, 2013 | Cars & Trucks
Jul 27, 2017 | 2007 Buick LaCrosse CXS
Nov 07, 2011 | 2001 Pontiac Montana
Oct 22, 2011 | 2009 Dodge Journey
Dec 13, 2010 | 1997 Honda CR-V
114 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: