Question about 2000 Oldsmobile Alero
Become a detective all screws that are hidden including in the door rest -look for inserts that can be lightly pried out some have them hiding the door in the door rest -using a door panel remover(found at most auto parts stores) start at lower edge of door pulling the nylon door snaps out from the frame-as you progress you use your feel if all screws have been removed .some nylon snaps will need a little coaxing.
Posted on Sep 25, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
first remove the door panel there are three screws that need to be removed first 2 under the inside door handle and 1 on the lower left hand side behind a reflector then pull off the panel it will be held on by push clips, once inside move the plastic weather bearrer to the side ,run the window half way down you should see 2 window holding brackets pull the window up so you can drop it in the brackets, first get some black window adhesive fill the brackets with adhesive put window in brackets and roll it up and leave it up for 24 hrs.If the brackets are broken you will have to replace the whole window motor assemly which you can get on line for 89.00 not the 250.00 at dealer and you can install it yourself its easy to do.
Posted on Mar 05, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge.
Posted on Sep 15, 2009
The radiator drain plug is on the lower left front (drivers side) of the radiator. To access it you may have to remove the front air dam. It is a white plastic plug and requires a Torx socket to loosen (sorry but not sure of the exact size of the Torx socket). Insert Torx and turn counter clockwise a half turn. Pull the plug out using a pliers until fluid begins to drain. Be careful because this is a plastic plug and may break easily. When fluid is finished draining simply push the plug in and turn clockwise half a turn with the Torx socket to secure.
Posted on Oct 29, 2009
Tips for a great answer:
Feb 15, 2016 | 2004 Oldsmobile Alero
Sep 15, 2012 | 2001 Oldsmobile Alero
Nov 09, 2010 | 2001 Oldsmobile Alero
Apr 07, 2010 | 2000 Oldsmobile Alero
Jul 02, 2009 | 2001 Oldsmobile Alero
Jun 12, 2009 | 2004 Oldsmobile Alero
Jan 22, 2009 | 2001 Oldsmobile Alero
Jan 10, 2009 | 2001 Oldsmobile Alero
126 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: