Question about 2002 Buick Rendezvous

2 Answers

Belt install diagram 3.4 liter

2002 buick rendezvous serpentine belt routing diagram 3.4 liter w/ac

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 1,959 Answers

Below is the diagram you requested. Kindly return to rate this solution and thank you for using Fixya!
belt install diagram 3.4 liter - e4ea7d0.jpg

Posted on Sep 24, 2009

  • 3 more comments 
  • Greg Margossian
    Greg Margossian Oct 09, 2009

    Kindly post a rating for the answer you've been supplied. Thank you.

  • pennymechlin
    pennymechlin Feb 19, 2012

    This diagram was extremely helpful! Thanks, Greg

  • bog_me89
    bog_me89 Mar 16, 2013

    I cannot see the diagram could you please post it again, Thank you!

  • Justin Jul 21, 2013

    will this work for a 2004 version???

  • Terry Clingan Aug 16, 2015

    Thanks. I've had this belt off and on at least a dozen times and if I don't make myself a diagram I can't for the life of me figure it out.


  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Thank you very much the diagram was very helpful

Posted on Feb 28, 2015

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Replace alternater belts

The 3.5 engine uses a serpentine belt which runs everything.
You would release the tension on the tensioner pulley and remove the belt. There should be a diagram on the hood or radiator support showing the belt routing. If not, be sure and draw a diagram before you remove the old belt.

Jul 14, 2014 | 2006 Buick Rendezvous

1 Answer

Serpentine belt diagram for a 2003 Chevy unpalatable 4.3

Pop the hood of the car and locate the serpentine belt routing diagram. The diagram on the 2003 Chevrolet Impala is on top of the fan shroud. The diagram will be a picture of all of the accessory pulleys and how the serpentine belt is routed among the pulleys. This diagram will give you the exact direction for routing the new belt onto the pulleys. If you cannot find a serpentine belt routing diagram, take a notepad and pen and draw out the exact routing diagram of the old belt across the pulleys.

  • 2 Locate the serpentine belt tensioner. It is located below the alternator on the left front side of the engine. The tensioner on the 3.4 liter, 3.5 liter and the 3.9 liter engines will require a 3/8 ratchet to release the belt tensioner. The 3.8 liter engine will require a ratchet and a 15 mm socket for the belt tensioner. Rotate the belt tensioner clockwise to loosen and remove the belt from the belt tensioner pulley.
  • 3 Slide the old belt from the belt tensioner pulley. Remove the belt from the remaining pulleys and pull the belt from the engine compartment.
  • 4 Route the new belt across the crankshaft pulley first. The crankshaft pulley is the big pulley on the bottom of the engine in the center. Then route the serpentine belt across the remaining pulleys as directed by the serpentine belt routing diagram. Leave the belt tensioner pulley for last.
  • 5 Rotate the belt tensioner clockwise again to relieve the tension and slide the new belt across the top of the belt tensioner pulley. Release the belt tensioner and the belt will tighten up as the tensioner applies pressure to the belt. Make sure the new belt is properly seated in all the pulleys.
  • 6 Crank the engine and inspect the belt again to make sure that it stays seated in the pulleys.

  • Read more: How to Replace a Serpentine Belt on a 2003 Chevrolet Impala '

    Sep 21, 2011 | 2003 Chevrolet Impala

    2 Answers

    I need a serpentine belt routing illustration for a Buick rendezvous 2003...thanks

    Draw your own before you take the old belt off. Its easy and saves trying to find a diagram that might not even be right for your model .

    Mar 14, 2011 | Buick Rendezvous Cars & Trucks

    1 Answer

    I have a 2002 buick rendezvous and the air compressor has locked up and broke the serpentine belt. Is it possible to re-route the belt to bypass the air compressor or buy a smaller belt? Any other options...

    If you have the ac turned off the clutch on the front of the compressor should disengage. Then the ac pulley will spin freely and you can drive until you save up for a new compressor. You may want to save up they are about 3 to 400 bucks plus installation which is about 300.

    Nov 06, 2010 | 2002 Buick Rendezvous

    1 Answer

    Need a diagram of serpentine belt route for 2000 audi A6 quattro

    The serpentine belt routing diagram for 2000 Audi A6 2.8 liters V6 engine:

    CS = Crankshaft
    F = Fan pulley
    Gen = Alternator
    T = Tensioner
    AC = Air Conditioning
    PAS = Power Assisted Steering

    Sep 30, 2010 | Audi A6 Cars & Trucks

    2 Answers

    Serpentine belt installation routing - thank you

    Here's the diagram you asked for for the 95 Buick LeSabre


    Apr 11, 2010 | 1995 Buick LeSabre

    1 Answer

    Installing a serpentine belt on a 2002 buick rendezvous

    There is an idler pulley just below the alternator in the back of the engine, passenger side. Loosen by using a socket wrench to loosen the central bolt (there are two, one upper and one lower, you want the UPPER bolt). You don't need to remove, just loosen to relieve tension on the belt. The diagram for the belt is actually on a little plastic plaque on the front left of the engine.

    Dec 12, 2009 | 2002 Buick Rendezvous

    1 Answer

    Changing the serpentine belt with out an air

    I had to do that once, but it was on an older vehicle that AC was optional. Probably your best bet would be to see if you can wrap the belt on there, but bypass the AC pump. Then just mark the belt with a white marker to get the length you need. Take it to the parts store and have them measure it with their guide. They should be able to find you one that length. If a Rendezvous came without AC, you could just go in and ask for the belt for one without AC, but I don't think they did.

    Nov 01, 2009 | 2002 Buick Rendezvous

    1 Answer

    1995 buick rivera serpentine belt install?

    look around under the hood , on the underside of the hood, sometimes the belt routing diagram is on a sticker also check a Chiltons Manual sold at auto pARTS STOReS or on the web

    Jun 12, 2009 | 1997 Buick Riviera

    Not finding what you are looking for?
    2002 Buick Rendezvous Logo

    2,942 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Buick Experts


    Level 3 Expert

    75817 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8180 Answers

    Are you a Buick Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides