Question about 1998 Hyundai Elantra

1 Answer

The Flashers all work Hazard and l & R signals or they all do not

When you start driving the Signals and the Hazard lights do not work.
If you leave the Hazard light button ON the hazard lights all of a sudden after driving for a while. Start to work and then both signals work as well. But if you turn off the engine and restart the engine nothing works again. Should I just change the Flasher unit or is there another electrical problem?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,280 Answers

Go to www.hmaservice.com and register( Vehicle by VIN). Afterward, you have access to shop manuals, service bulletins, wiring diagrams, etc. about your vehicle.Take/Tow your vehicle to an authorized Hyundai dealership and pay the diagnostic fee... they will tell you exactly what the problem is and the cost of parts/labor to fix it... at least this way you'll know what the problem is and what's required to fix it.

Posted on Oct 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I brought a 2000 durango and the signals not working but the hazard lights work where and I find the problem


There are two separate flasher blocks, one for hazards and one for turn signals, listen for the clicking with hazards on there usually right next to each other, when you find it swap the flashers around and see if the turn signals start working and the flashers quit.. Otherwise you could also be looking at a turn signal switch problem

May 03, 2016 | Cars & Trucks

1 Answer

HAZARD AND TURN SIGNAL LIGHTS WILL NOT WORK


Turn signals and flashers not working - MyTractorForum.com - The ...

www.mytractorforum.com/.../193023-turn-signals-flashers-not-working....
Jun 5, 2011 - My turn signals and flashers are not working on my BX1500. I can hear the ... I hear nothing when I depress the hazard button and no light.

Turn Signal and Flasher Repair JD4300 Recovered Part 7 ...

? 19:17
https://www.youtube.com/watch?v=UrLN5xzbOzY
May 9, 2014 - Uploaded by mars1952
Turn Signal and Flasher Repair JD4300 Recovered Part 7 ... I bought a 4310 new in 2004 and I know these are great tractors, not the ... I have a John Deere 4400 and I wouldn't mind putting a set of those on it to protect the lights. .... Ford Explorer 2003 - MyTurn Signals Stopped Working - Duration: 2:15.

Jan 11, 2016 | Cars & Trucks

1 Answer

Why aren't hazard lights or brake lights working?


Brake lights /rear hazard lights not working - Ford Truck ...

www.ford-trucks.com > ... > 1967 - 1972 F-100 & Larger F-Series Trucks
Jul 9, 2010 - After checking the brake lights I tried the emergency flashers and found that they are working in the front but not in the back. I do have rear turn ... 1995 F350 Brake Lights / Turn Signals not working
Jul 9, 2012
Turn Signals and Brake Lights Do Not Work
Mar 10, 2012
Turn Signal, Brake Lights, & Rear Hazard not working
Aug 3, 2010
Rear Turn Signals, Hazards and Brake Lights not working....
Aug 29, 200

Sep 30, 2015 | Cars & Trucks

1 Answer

1998 dodge grand caravan emergency flashers & turn signals do not work


Sounds like the turn signal flasher (lighting control module). It is used for both the turn signals and the hazard flashers. There is one type for cars with DRL and one for cars without DRL.

a284d9fb-a87d-4547-bdc3-951fd78e5e08.jpg

Jan 17, 2015 | 1998 Dodge Grand Caravan

1 Answer

2000 tacoma flashers don't work but turn sig do work!


The hazard switch gets power from the horn fuse which is hot all the time, and from the turn signal fuse which is hot when the key switch is on. The turn signal switch gets power from the hazard switch and both use the same flasher.
So if the turn signals work but the hazard switch does not power the lights, and both fuses have power, I would say the problem is inside the hazard switch.

Feb 19, 2013 | Cars & Trucks

1 Answer

Flashers work but turn signals will not 1989 bonneville


There are usually two flashers that are used on most cars. One for the turn signals and one for the hazard lights. They are usually located under the dash. If you don't know what they look like, then go to the parts store and ask to see a new one. Once you locate both of them, see if they have the same part number stamped on them. If they do, then switch them and see if the signals work.
REMEMBER : The key must be turned on for the turn signals to work in most cases. The hazard flashers will work with the key off.
If the signals work, then replace the turn signal flasher. I hope this information is helpful and thank you for using Fixya.com.

Jun 25, 2011 | Pontiac Bonneville Cars & Trucks

1 Answer

I got a 2006 malibu and I'm having problems with the hazard lights. The hazard lights don't work but the turn signals do.


check fuse under dash, or may be a bad flasher. you'll find that right next to fuse box you should have 2 flashers one for turn signals @ 1 for emergency flashers

Aug 15, 2010 | 2006 Chevrolet Malibu

2 Answers

Turn signals do not work. Emergency Flashers work. fuse is ok. 1991 ford econoline van. Where do I start. Was working yesterday


You did try switching flashers to see if any difference right? There's 2 in fuse panel, 1 for hazard & one for signals.

Sep 13, 2009 | 1991 Ford F150

2 Answers

Turn signals don't work


i have a similar problem but my left signal works, when i turn the right on it just does an annoying buzz sound. if you can think of any explination for such shinanogins help would be greatly appreciated

Nov 25, 2008 | 1989 GMC K1500

Not finding what you are looking for?
1998 Hyundai Elantra Logo

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...