Question about 2003 Ford F150 Regular Cab

1 Answer

Window will not roll up or down

F 150 window will not roll up or down on the drivers side and you can hear a clicking in the relay in the fuse panel

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 396 Answers

Two possible problems. Defective motor or window regulator. Remove the door panel, you will see three star screws holding in the motor. Remove the motor, remove the plate, one screw, inside the motor you should see three plastic plugs, these get old and turn to powder, to replace these you can purchase these from any automotive store for around $8.50. But I would replace these with ball bearings cost.64 each. Now you will see some aluminum plugs with rivits holding in the window regulator. To remove these you nweed to punch out the rivits, and drill out the aluminum using 1/4 drill bit. Replace these with 1/4 inch bolts and nuts. Pack the motor with wheel bearing grease and grease the window regulator. You may want to consider replacing all the regulators and checking all the motors. If one has gone bad the others will follow. Just rweplaced all 4 on my old 1996 mercury. Order the regulators on line much cheaper.

Posted on Sep 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My driver side window wont roll up


First check the fuses for both electric windows if they are good.The fuse box one is on the engine compartment driver side look for long retangular black box and open the fuse cover the cover should designate what the fuses and relay is for the other is on the driver side under the dashboard just above your left foot look under you should see another fuse box.If both fuses are good,then your going to have to check the window regulator which is inside each door.Open the door panel and check window regulator morethan likely the regulator assembly need to be change.You might just need the motor.The whole assembly is quite expensive.

Nov 06, 2012 | 1996 Lexus ES 300

1 Answer

2003 Boniville windows stopped working drivers side


should be a place to pop the clips at the bottom of the door mine does that 2 but i can putt them up from the back door if its those windows

Feb 06, 2010 | 2003 Pontiac Bonneville

2 Answers

The drivers side window auto up/down quit


1. Start the car and leave it idle.
2. Hold the window button down all the way, until the window is completely down.
3. Let go and push it down again and hold the window button for 2 to 3 seconds then let go. (You should be able to hear or feel (very faintly) the motor/sensor reset.)
4. Pull up on the window button and roll the window up until it is all the way up, when it is up let go.
5. Pull the button up again for 2 to 3 seconds. (You should be able to hear or feel (very faintly) the motor/sensor reset.)

Nov 02, 2009 | 2008 Honda Pilot

2 Answers

2000 Ford expedition window problem


Sounds like you need a window motor. Try hitting in center of door trim panel to see if you can get it to work if so replace motor.

Jul 05, 2009 | Ford Expedition Cars & Trucks

2 Answers

Rear driver side window won't roll down on 2003 lexus es300


I had the same issue with the passenger side rear window. I took the panel off (one screw under the window switch and one screw located behind the door handle. There is a small black cover over the screw.) I then took the motor off of the door and track system. After the track was off, I plugged the motor back into the wiring harness and tried the switch. Mine actually worked and the gear spun, if not, it will be a pricey window motor about $150-$250 depending on where you get it. Good luck! Sean

Jun 03, 2009 | 2003 Lexus ES 300

1 Answer

Pass.side power window won't work.


First be sure the window lock in the drivers side master switch is not LOCKED. This will prevent the windows from being rolled down by any other switch. (p106+)

Usually windows operate off a RELAY - not a fuse... and all the windows work off the same power relay.

Your Relay Part Number is 41-5021.
Here is the electrical schematic for your windows - showing the relay is common to all windows.

6713bdf.gif
CLICK HERE for a better pic.

If the relay is replaced - and/or tested good, You will need to remove the offending door's panel and verify the motor is getting 12VDC when you press the button for it to go down.

If there is 12VDC when you push the button, the motor is bad.

If there is NOT 12VDC when you push the button - the master switch or child lock bypass switch is faulty.

Click HERE for a PDF version of your owners manual

Under the ROADSIDE EMERGENCIES section (p.245) you will find a layout diagram of your fusebox.

P.248 instructs to pull DOWN on the fusepanel door to access... however your power window relay is located under the driver's side dash.



If the other windows work - there are 3 options to test/replace - in this order
1. Relay
2. Master Switch
3. Window motor.


Thanks for using FixYa - a FixYa rating is appreciated for taking the time to answer your FREE question.

Mar 20, 2009 | 1998 Mercury Villager

1 Answer

Windows wont go down or up


Check the switches for a clicking sound if you hear a clicking sound then the switches are fine. Does the driver side switch work for the windows? Check it for the click sound. Make sure it isnt a blown fuse. If you have replaced the fuse and you dont hear clicking sound it might be the switches and you can find them at a junk yard. If you have tried all these things and it still doesnt work you might need new window regulators and/or window motors or it might be a wiring problem.

Mar 08, 2009 | 1995 Pontiac Bonneville

1 Answer

Hear clicking sound from Passenger window, but won't roll up or down


The clicking is the relay, that means the relay is ok, if it didn't click it would be defective, you most likely have a faulty power window motor.

Oct 21, 2008 | 1994 Nissan Pathfinder

Not finding what you are looking for?
2003 Ford F150 Regular Cab Logo

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...