Question about 2002 Pontiac Grand Prix

2 Answers

I need to know what the torque spec is for a auto trans. pan gasket on a 2002 Pontiac Grand Prix?

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 169 Answers

It is actually 10 ft lbs. This is something that you want to tighten to exact specs.


Hope this helps!

Posted on Sep 25, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pontiac Master
  • 6,982 Answers

Don't remember exactly but it's about 13 or 14 inch pounds. You don't really need specs, just tighten with a nut driver (like a screwdriver with a socket on the end) and don't crush the gasket so it bulges out. tighten one bolt at a time on alternating sides (like head torquing) after re-fill, run it and check for leaks...if any, re-tighten lightly till the leak stops. (tighten closest bolt to leak and both on either side)

Posted on Sep 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are the intake manifold torque specs on a 2005 Pontiac grand Prix gtp 3.4 liter with super charger?


If it were mine, I'd want to be very sure what it was and so I always use a Repair Manual I can see and read, but that me.

Mar 13, 2015 | 2005 Pontiac Grand Prix GTP

1 Answer

Need torque spec's for 1999 Grand Am 2.4L motor valve pan gaskets bolts? thanks


I need know the torque head Pontiac Grand am se 1999. Machine 2.4

Mar 24, 2012 | 1999 Pontiac Grand Am GT

1 Answer

I have a 2002 mercury cougar V6 automatic and I know what the problem is. My car needs to have the transmission pan taken out and replaced along with the gasket. My dad and I want to fix it ourselves but...


easy job. Just loosen pan bolts enough to let the fluid start draining from one end. As more drains, keep loosening the pan bolts till you can remove pan and finish draining what's left in the pan. At this time, most people would also change the transmission filter body: it's right on bottom of trans. when the pan is removed, easily accesible. Parts stores sell a kit with new filter and pan gasket included. Anyway, now you are ready to install new pan gasket. Clean gasket mating surfaces as clean as you possibly can. let no oil or fluid get back on there. Place gasket on (most don't recommend adding sealant or gasket compound). Put pan on with all bolts fingertight. Then starting from center outward, start tightening them down to torque specs-it'd be pretty light torque, like around 20 ft-lbs-might want to ask a ford mech. what torque specs are. When done, refill ****** and check for leaks after running car.

Oct 14, 2011 | 1999 Mercury Cougar

1 Answer

Replacing the intake manifold gaskets and head gaskets could you tell me the torque for both of these


Before accepting any advice on the torque specifications for the bolts, you should refer to the Haynes manual that specifically relates to your vehicle. The reason reason why knowing the torque specs. for these various bolts is not good enough is that each bolt will need to be tightened in a certain order/sequence. The Haynes manual provide you this information and a lot more! These manuals will run you about $10-$15 and they can be purchased at most auto parts stores (i.e. Auto Zone, Pep Boys, etc.). Good Luck!

Please remember to rate this solution. Thanks!

Jan 16, 2011 | 2000 Pontiac Grand Prix

1 Answer

Need to know what the torque spec is for my 1997 pontiac sunfire trans pan, 12 bolt pan. its a 4 speed auto.


HI, the torque spec for the pan bolts is 14nm or 124 in lb. snug them down evenly it doesn't take much to over tighten these and strip out the threads.

Aug 28, 2010 | Pontiac Sunfire Cars & Trucks

1 Answer

Change an oil pan gasket on a montana


Go down to your parts dealer (hopefully Auto Zone :)) and get the gasket as well as oil and oil filter (unless you are going to use the old oil and have something to catch it in). Drain the oil. Remove the bolts on the oil pan. Remove it and the old gasket. Check to see that ALL of the old gasket has been removed. Clean the mating surfaces. Put new gasket in place on the pan and place to the block. Install bolts and tighten to specs. You can get the bolt torque specs from AZ as well. Add oil before starting engine

Mar 15, 2010 | 2002 Pontiac Montana

2 Answers

Where is the drain plug for the automatic transmission fluid on a 2000 pontiac grand prix gt 3800 engine


transmissions do not have drain plugs u must remove the trans pan assembly slowly from one side to the other and have a large container under it to catch all of the fluid then replace the trans pan gasket

Nov 11, 2009 | 2000 Pontiac Grand Prix

1 Answer

Have a 2002 grand prix 3.8 auto trans only has 1st and rev.no 2,3,od fluid level is good.


Sounds like an internal transmission problem -- you will have to take the transmission out and disessemble....you need to know what you are doing in order to do this job. Since you are getting a 1 and rev. everything electrical is working.

Jul 13, 2009 | 2002 Pontiac Grand Prix

1 Answer

Head bolt torque specs for 1992 Pontiac 3.1 ltr


the last time i did the same job the gasket kit had the specs inside the box. the parts store should have a book/reference manual

Dec 09, 2008 | 1992 Pontiac Grand Prix

Not finding what you are looking for?
2002 Pontiac Grand Prix Logo

308 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...