Question about 1992 Ford Crown Victoria

1 Answer

I have a 92 crown vic and the speedometer stoped working on me, i changed the sensor in the transmishion and the teeth on the plastic gear looked good, this model did not have a speedo cable, i have checked all the fuses and they seem to be in good working order, any sugestions on where i shold look next?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 89 Answers

I owned a 1992 CV,and check the same things you did.I had to send the speedo head out for repair or replace it.

Posted on Oct 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I put a 2003 transmission out of a crown vic into a 1998 crown vic then wired the vss into the output shaft sensor little did i know that made my speedometer reading double how can i fix this will swaping...


I doubt it.
The computer for the 2003 would not follow all of the wiring patterns in the 98 harness not to mention the chip would be different.

Oct 15, 2012 | Cars & Trucks

3 Answers

My speedometer does not work on my 1998 gmc jimmy. Where do i located the speedometer fuse?


I have gmc jimmy speedomter wront work abs light comes on will not shift we Chang the vss still disentangle help

Apr 23, 2011 | GMC Jimmy Cars & Trucks

6 Answers

I have a 2006 Ford Crown Vic Police Interceptor. I am having a problem with the dash. As I am driving it all the warning lights come on and the speedometer, tach, and odometer all stop working. I have...


Has anyone bothered to scan the IPC (Instrument Panel Cluster) or the GEM (General Electronic Module) to see if there are any fault codes? Does the engine run OK when this happens? I had a Grand Marquis that was doing something similar and the modules had several U-codes. Finally found the problem in the Transmission Range Sensor - it was shorting out the data line.

Dec 02, 2010 | 2006 Ford Crown Victoria

1 Answer

92 crown vic - temperature guage on the dash is not working...


0900c152801e4775.gif

The temperature gauge sending unit is located in the front section of the intake manifold, just to the right of the alternator on the 4.6L engines. Got this from autozones repair manuals


Mar 16, 2010 | 1992 Ford Crown Victoria

1 Answer

Speedometer and odometer does not work in 1998 Crown Vic police interceptor


Either the speed sensor,or the dash cluster is of fault. Have Auto Zone test the speed sensor,if ok ,,, I would replace the cluster ( buy used ) much cheaper.
Please rate this.

Jul 27, 2009 | 1988 Ford Crown Victoria

2 Answers

1990 Crown Vic LX Odometer does not work


I think the speedo head is probably good. You need to check the speedo cable and the gear at the end of the cable housing. If the gear is cupped in the center it is worn out. Replace the gear by the color code at your local Ford dealer. The other scenario would be that the gear on the output shaft is worn also. This would require the tailshaft be removed from the tranny and the nylon gear replaced on the output shaft. Good luck.

Mar 12, 2009 | 1990 Ford LTD Crown Victoria

1 Answer

Crown vic trouble shooting


try changing temp sensor could be your problem

Jul 31, 2008 | 1992 Ford Crown Victoria

1 Answer

1994 crown vic speedometer works and the odometer dont.I took the gear out and it looks fine.what now


Have that entire assembly rebuilt and be done with it. Those are a major pain if you've never done one before, and I speak form experience. PS The "clear tab" lever could be stuck or broken...accordianman

Jul 22, 2008 | Ford Crown Victoria Cars & Trucks

1 Answer

Speedo


On the tailshaft of the transmission there is a speed sensor. Under it is a gear, driven by the output shaft of the transmission. The output dshaft rives the gear, and the gear shaft drives the sensor, which sends a voltage to the speedometer for MPH. If this sensor is bad, you may also get a check engine light on. Remove the sensor, & inspect the gear. If the teeth are OK, replace the speed sensor.

Jun 28, 2008 | 1992 Toyota Previa

Not finding what you are looking for?
Cars & Trucks Logo

408 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...