How to get the cap off the rear drum

6ya staff

• 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Download 6ya

6ya.com

Need repair answers fast Use 6ya to...

Posted on Jan 02, 2017

SOURCE: How to install 2003 dodge neon headlight assembly.

1. Disconnect and isolate the battery negative cable.
2. Remove screws attaching headlamp module to upper crossmember.
3. Remove headlamp module from vehicle.
4. Disconnect wire connectors from back of headlamp module.
5. Remove headlamp module

Posted on Jul 03, 2008

SOURCE: How do you get the rear brake drum off?

2003 dodge neon sxt

Here are the steps;
) Park on a level surface. safety
) Block all the other wheels. safety
) Put the vehicle gearshift in PARK. safety
) Release the handbrakes.
) Slightly break the rear wheel lug nuts seal while on ground. Just loosen do not remove.
) Jack up the rear wheel.
) Check to see the wheel will turn so you know the brake shoes are not binding against the drum.
) Now you can remove the lug nuts and wheel.
) Remove the drum. Some times the drum has frozen on with rust. You may have to use a hammer and hit along the drum near the outer edges to break it free.

Posted on May 08, 2009

Frank

• 1605 Answers

SOURCE: left rear wheel locking up. have drum off, need diagram of brakes

back the adjuster to the point you can just trun the caliper or the drum with little force. you will hear a little rubbing sound from the brake pad.

Posted on May 19, 2009

SOURCE: 2002 dodge neon right rear wheel locked up. Is it

THE BRAKE LINING ON ONE OF THE SHOES MAY HAVE LET GO AND OVERLAPPED THE OTHER ONE,CAUSING IT TO BIND UP..IF NOT,TRY OPENING BLEEDER SCREW AND SEE IF IT RELEASES..IF IT DOES,REAR BRAKE HOSE MAY BE HOLDING WHEEL CYLINDER PISTONS OUT KEEPING BRAKE ON..YOU'LL NEED TO REMOVE AFFECTED DRUM AND INSPECT BRAKES AND REAR HUB/BEARINGS

Posted on Aug 04, 2009

SOURCE: 2003 dodge neon vibrates

check the cv shafts. you got a bad one.

Posted on Aug 08, 2009