Question about 1980 Cadillac Deville

4 Answers

I need a new window regulator for the right rear door. Do you know where I might find one. They are obsolete and 2 dealers have told me they not available.

Posted by on

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 1,986 Answers

I'd say you'd have to call around to junk yards and hope they have one lying around. Also, your dealer may be able to cross reference to see if any other regulators might fit in your car

Posted on Sep 24, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 78 Answers

You're right, this is kind of a hrd part to find these days. your best bet would be to order online. search google for "1980 cadillac deville window regulator" and they pop up all over the place. they seem pretty cheap too.

Posted on Sep 24, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 299 Answers

Look up lkq.com and give them a call also look on ebay

Posted on Sep 24, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 64 Answers

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Were does the LH mirror on a 2011 f-250 connect. Removed mirror but disconnect is located some were in door or body. need to know what needs to be removed to gain access


  1. Remove the front door trim panel.
  1. Position aside the front door watershield to gain access to the exterior rear view mirror control switch electrical connector.
4.Disconnect the exterior rear view mirror control switch electrical connector
ganyapr_7.jpg
as you see you have to remove the door panel to have access to the electrical connector in case that you dont know how to do it here are the instructions

NOTE: Left front door trim panel shown, right front door trim panel similar.
  1. Remove the sail panel.
    • If equipped, disconnect the electrical connector

  2. If equipped, lift up and remove the exterior rear view mirror control switch panel.
    • Disconnect the electrical connector.
  1. If equipped, lift up and remove the window control switch panel.
    • Disconnect the electrical connector.
  1. If equipped, remove the window regulator handle.
    1. Position the window regulator handle cover aside.
    1. Remove the window regulator handle screw and regulator handle
5.Remove the door trim panel center screw cover
6.Remove the 2 door trim panel center screws
7.Remove the 2 door trim panel lower screws
  1. NOTICE: Do not pull directly outward on front door trim panel as damage will occur.
    Remove the front door trim panel.
    • Lift upward to remove the front door trim panel.
  1. NOTICE: Insert the lower panel tabs first or they can break when installing the front door trim panel.
    To install, reverse the removal procedure

Feb 20, 2011 | 2011 Ford F-250 Super Duty

4 Answers

I need instructions on install/uninstall right rear power window on a 2002 Buick Lesabre.


First you need to remove the inner door panel, it will be held on by screws and clips.

Jul 21, 2008 | Buick LeSabre Cars & Trucks

2 Answers

Replace door window motor


Is it a 4 dr or 2. What door front? rear? left or right?

Sep 28, 2010 | 1997 Nissan Pathfinder

1 Answer

My Saturn dealer told me I needed to replace the regulator in the passenger rear door for the electric window to operate properly. The Saturn is a 2000 LS2. I did not like the price they gave me for the...


You can pull the panel and move the window regulator manually to put the window back up. If you can get that far you may as well get the regulator from a boneyard an put it in. You will need a grinder to get the rivets out and some bolts to put it back in. If you don't change the regulator, make sure you unplug the motor inside the door because it may work in "down" mode but not up. You don't want to have to do it again. Or you could check Ebay for the regulator. Good luck.

Apr 20, 2010 | 2000 Saturn Ls 4dr Sedan

2 Answers

2007 rear regulator broken


Some dealers have the old style regulater but the new regulater has been redesigned and won't fit with the old window I know it sucks big time. THe best advise I can give u is to call Chrysler and see if they will good will it under warenty they do that with some long time custumers to keep them happy. Good luck

Sep 09, 2009 | 2006 Jeep Liberty

2 Answers

Right rear passenger window fell into door


Chrysler is notorius for this kind of thing. I work at a parts store that sells Delco and Motorcraft. Most chrysler parts are dealer only, sorry.

Jun 23, 2009 | 2006 Jeep Liberty

3 Answers

Hey when i push the power botton for the rear window it doesn't go down,I checked the power button,and its good ! Can i replace the power motor in the rear window,and where is it located,i would like to...


  1. Raise and support the rear door window glass to the full up position.
  2. Remove the interior door handle.
  3. Remove the rear door speaker.
  4. Remove the water shield.
  5. Disconnect the rear door window regulator motor electrical connector.
  6. Remove the rear door window regulator rivets.
  7. Remove the rear door window regulator by sliding the regulator arms off of the window glass track.
  8. Installation is the reverse of the removal procedure, noting the following:
    • Cycle the door glass to make sure of engagement of the drive mechanism.
    • Remove the rear door window glass-to-regulator bolt or rivet.
    • Position the rear door window glass as necessary to access the rear door window glass-to-regulator rivet.
    • Secure the rear door window glass in the full UP position with tape.
    • Disconnect the window regulator motor electrical connector.
    • Remove the 2 window regulator nuts.
    • Remove the 3 window regulator motor bracket nuts.
    • Install the window regulator assembly. Tighten the 3 motor bracket nuts to 89 inch lbs. (10 Nm).
    • Install the 2 window regulator nuts. Tighten the nuts to 89 inch lbs. (10 Nm).
    • Connect the window regulator motor electrical connector.
    • Remove the tape securing the rear door window glass in the full UP position.
    • Position the rear door window glass as necessary to access the rear door window glass-to-regulator rivet. Tighten the bolt to 62 inch lbs. (7 Nm), or install a new rivet.
    • Install the window regulator motor
    • Remove the window regulator assembly.
Remove the window regulator motor

Feb 23, 2009 | 2001 Ford Explorer

1 Answer

Bmw 325 window regulator with motor installation


chances are, the motor is fine. the regulators break all the time though. You can install it yourself with a little common knowledge. First obtain a new regulator for the respective door from your local dealer. To begin, remove the door panel. use a small screw driver to pry off the wood trim at the top portion of the door panel starting from the rear and moving forward. then pry out the small cover by the door pull as well as the 2 covers underneath the armrest. use a T-20 torx driver to remove the 5 hidden screws. then pry the door panel off of the door being careful not to ruin the clips or tug on the wiring. set the panel aside. now you will need to remove the side airbag (if applicable)using a 10mm socket. release the locking tab on the plug by prying it up approx. 1/4 inch, and then pull the plug out of its connector. be careful not to turn the key on with this unplugged or the airbag light will be tripped on. if you must , re install the plug so that the computer can "see" it. Now remove the vapor barrier using a razor blade. be careful not to rip it. once the inside of the door is exposed you should remove the 3 T-30 torxes on the window motor. then tilt the motor out of its bracket and remove it. you may have to pry at it depending on how tight the cable tension is. Now that the regulator is left in the door you have to remove it. lift the window by hand up in the door until you can see the two 8mm screws attaching it to the regulator through the 2 rectangular slots in the regulator arms. if the window is jammed down and will not move, use a pair of **** or wire cutters to cut the cable to free it up. now remove those 2 8mm screws and push the window back and up into the door where it goes when you roll it up all the way. now remove the 5 10mm screws holding the regulator to the door. install the new regulator into the door and bolt it in place. pull the window down and install the 2 8mm screws. re install the motor, vapor barrier, and airbag. then press the door panel back onto the door and bolt it back in, and finally install all of the covers.

Oct 14, 2008 | 2001 BMW 325

1 Answer

Rear passenger side window stuck in down position


1) Yes you are right to think that it is the regulator.
2) You can repair this.

Remove the screws that hold the door panel on.
Remove the door panel. There are alot of clips on the door panel that just need to be pulled out with panel while removing.
Remove debris shield.(plastic piece between door panel and door.
The regulator will be visible at this point.
Disconnect the electrical connector from the regulator. Separate Glass from regulator. Some use clips some use bolts to hold the glass to the regulator.
Remove regulator attaching bolts.

Thats it just reverse the procedure for installation.

Aug 29, 2008 | 2006 Jeep Liberty

1 Answer

Inoperable left door window


no they are exact opposites. yes door panel need to be removed.

Jul 23, 2008 | 2003 Chrysler Town & Country

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75235 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7795 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...