Question about 1993 Plymouth Voyager

1 Answer

Need to know how to put in a surpentied belt for a Plymouth voyager

Posted by on

  • K W May 11, 2010

    Not sure if I asked already, but what size motor?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Plymouth Master
  • 1,757 Answers

For the 1993 Plymouth Voyager Serpentine Belt:
Did not specify what Size Engine: 2.5L, 3.0L or 3.3L.

Click on the following free direct Link. It has several of the Serpentine Belt Diagrams and Tensioners that are possible with your Size Engine (2.5L, 3.0L, 3.3L) and engine options (AC/No AC, etc.).
http://www.2carpros.com/car_repair_information/year/1993/make/plymouth/model/voyager/1993_plymouth_voyager_drive_belt_routing_diagram.htm

"HOW TO":
Standard Rules to Removal the Serpentine Belt with a Tensioner:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.
4. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.


Standard Rules for Installing the Serpentine Belt with Tensioners:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

Posted on Apr 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 plymouth voyager 3.0 liter timing marks


The mark should be on the sprocket, clean it well to see it

Mar 30, 2013 | 1992 Plymouth Voyager

1 Answer

I need a belt diagram for a 1998 Plymouth grand voyager with a 3.0l v6


It has multiple belts, I hope this diagram puts you in the right direction.


360dreamworx_35.gif

Jul 20, 2011 | 1998 Plymouth Grand Voyager

1 Answer

"1996 plymouth voyager timing belt" How do I know


Hi,
get the engine number plus vin number and go to a Chrysler dealership. They can put the info in a computer and give you the correct answer. The SOHC Chrysler 2.4 is a "free-wheeling" engine.

Your drivers handbook should also, (i believe) have that information.

Good luck.

Feb 01, 2011 | 1996 Plymouth Voyager

1 Answer

How do you replace an auto tensioner (serpentine belt pulley) on a 2000 Plymouth voyager?


take the pressure off the belt and move belt off the tensioner then unbolt it and remove then bolt on the new one then put pressure on tensioner to put belt back on (make sure you see and know how the belt goes back on incase it comes off more than you intended)

Nov 20, 2009 | 2000 Plymouth Voyager

1 Answer

I have a 1995 plymouth grand voyager with a 3.3. I need to know how to put the serpentine belt back on....


If there is no decal on the underside of the hood, or in the engine compartment somewhere... wrap it around the crankshaft, and work your way around, putting ribs to ribs, and flats to flats. There may be a couple of combinations, but you'll get it.

Oct 31, 2009 | 1995 Plymouth Grand Voyager

1 Answer

1994 plymouth voyager serpentine belt diagram


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/1994/make/plymouth/model/voyager/1994_plymouth_voyager_drive_belt_routing_diagram.htm

Oct 29, 2009 | 1987 Plymouth Voyager

1 Answer

Need help with harmonic balancer and timing We have the balancer but need the diagram or specs for timing. Timing belt broke trying to put it back on and time it. Dodge Voyager 1997


Sorry for the delay.
I am personally going back to answer your unanswered question. I do not know if you still need the answer, but I am going to answer it in case you still do.
Harmonic Balancer on a '97 Plymouth Voyager?
Click on the following direct Links. The first Link has the Timing Belt Diagrams that you will need. The second Link has the Serpentine and Drive Belt (if applicable) Diagrams you will need.


Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
For the Timing Belt:
http://www.2carpros.com/car_repair_information/year/1997/make/plymouth/model/voyager/1997_plymouth_voyager_timing_belt_diagram_marks.htm
For the Serpentine and Drive Belts (if applicable):
http://www.2carpros.com/car_repair_information/year/1997/make/plymouth/model/voyager/1997_plymouth_voyager_drive_belt_routing_diagram.htm

Oct 16, 2009 | 1997 Plymouth Voyager

2 Answers

1997 plymouth grand voyager v6 3.0L broken timing belt


I had the same thing happen, No, I was told this is not one of the engines that allows the piston to contact the valves. I replaced the timing belt 2 years ago and had no valve problems.

Sep 22, 2009 | 1997 Plymouth Grand Voyager

1 Answer

Need diagram for power steering belt on 94 plymouth voyager


r u needing the belt diagram for the power steering,alternator,etc etc...? if so email me at(DarkOctober1@yahoo.com) and i can send u a pic of the diagram i have. i have a 1994 plymouth voyager 3.3l just so u know.

May 11, 2009 | 1994 Plymouth Voyager

1 Answer

Need timing belt diagram for 1993 Plymouth Grand Voyager 3.3 L engine!


Are you sure you don't need the serpentine belt diagram or you have a 3.0? Because 3.3's don't have a timing belt. Let me know.

Mar 05, 2009 | 1993 Plymouth Grand Voyager

Not finding what you are looking for?
1993 Plymouth Voyager Logo

345 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...