Question about 2001 Jeep Grand Cherokee

1 Answer

I am experiencing foggy windows on the front glass and side windows. I replaced the expensive blend door in 2007. I have no leaks and I do smell coolant from time to time. I bought this 2201 Jeep Grand Cherokee Limited used in 2005. This problem just started a few weeks ago. Could the problem be as simple as a coolant flushing or a new heater core?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 546 Answers

Most likely the heater core.check carpet in front under dash for moisture.

Posted on Sep 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Same here water ingress front n back passenger side really bad help out there anyone 2007 model


Leaking windscreen gasket. Leaking side windows. Leaking rear window or door gasket. Had any glass changed-out lately? It sounds like the leak I once got in my Porsche 944. It was a cheap windshield installation...quite a bargain price, I shoulda guessed....

Jan 18, 2015 | Cars & Trucks

2 Answers

How can I get a front side window replaced by someone else?


Find a local glass shop. They give free estimates

May 03, 2014 | 1996 Volvo 850

1 Answer

Toyota corola heater blen door ( heat only blows from front vents )


it sounds like a vacuum leak to me but dont hold me to not sure if vent controls on that year run off vacuum or not

Nov 21, 2013 | 2006 Toyota Corolla

2 Answers

Air conditiner cools on right side but not on left side


It can be issue with blend door actuator or vacuum leak or loose vacuum hose connection.
I suggest you few help links.Click the link below and follow the troubleshooting.
-----
A/C Blows Warm? http://whoisbyme.blogspot.in/2012/06/2005-chrysler-pt-cruiser-ac-blows-warm.html

----------
A/C blows Cold From Defrost Vent Only? http://whoisbyme.blogspot.in/2012/06/2009-mercury-grand-marquis-ac-blows.html
-----------
A/c Blows Warm on driverside? http://whatisbyme.blogspot.in/2012/06/2007-kia-spectra-ac-blows-warm.html

-----------
A/C compressor clutch won't engage http://schematicsdiagram.blogspot.in/2012/04/2000-cadillac-deville-ac-compressor.html

---------------
Ford : A/C blows Warm? http://whoisbyme.blogspot.in/2012/06/2007-ford-freestyle-ac-blows-warm.html

----------
Thanks.

Jun 26, 2012 | 2005 Ford Five Hundred

2 Answers

HEATER DOES NOT HEAT. CAN SMELL SOMETHING WHEN CONTROL IS ON. WOULD THIS BE HEATER CORE RELATED?


Yes is it a sweet smell, is there wetness on passenger side floor does window get foggy. then yes heater core.

Dec 07, 2009 | 2001 Lincoln LS

2 Answers

Windows get like a foggy film and smells like old antifreeze. i think its my heater core? its a 95 bronco & where is it located exactly on that model?


Dear Foggy Film......
You are correct!!! This foggy film is the result of the antifreeze leaking and then evaporating inside the cab of the vehicle. The heater core on this vehicleis located inside the evaporator case inside the vehicle's cab on the firewall up underneath the dash closer to the passenger's side. It involves about three hours labor to replace the heater core.This is a moderate to mildly intensive repair for the first timer..if you have any more questions then you're more than welcome to get back to me!!!! HOPE I COULD HELP!!!

Nov 17, 2009 | 1998 Ford Contour

2 Answers

200 Jeep Laredo..Air is cold and fan is blowing,


there is a blend door actuator for the laredo and if is bad the air wont come out here is a pic of what it looks like and how to get to it


The single zone heater-A/C system is equipped with a single blend door actuator. The dual zone system has two blend door actuators, one for the driver side blend-air door and one for the passenger side blend-air door.
7d2da02.gif
  1. Disconnect and isolate the negative battery cable.
  2. Remove the glove box from the instrument panel.
  3. Remove the three screws that secure the blend door actuator to the passenger side of the HVAC air distribution housing .
  4. Remove the blend door actuator from the air distribution housing and disconnect the HVAC wire harness connector from the actuator.
  5. Remove the blend door actuator from the vehicle
to instal
  1. Position the blend door actuator into the vehicle.
  2. Install the blend door actuator onto the passenger side of the HVAC air distribution housing . If necessary, rotate the actuator slightly to align the splines on the actuator output shaft with those on the blend door cam .
  3. Install the screws that secure the blend door actuator to the passenger side of the air distribution housing . Tighten the screws to 17 inch lbs. (2 Nm).
  4. Connect the HVAC wire harness connector to the blend door actuator.
  5. Install the glove box into the instrument panel.
  6. Reconnect the negative battery cable.

Sep 09, 2009 | 1998 Cadillac Seville

1 Answer

Power window problem. engauges then disenguages


Section 01-11: Glass, Frames and Mechanisms 1997 Windstar Workshop Manual REMOVAL AND INSTALLATION Door Glass and Regulator, Power Windows Removal
svw~us~en~file=ani_caut.gif~gen~ref.gif WARNING: IF THE REGULATOR COUNTERBALANCE SPRING MUST BE REMOVED OR REPLACED FOR ANY REASON, MAKE SURE THAT THE REGULATOR ARMS ARE IN A FIXED POSITION PRIOR TO REMOVAL TO PREVENT POSSIBLE INJURY DURING C-SPRING UNWIND.
  1. Remove front door trim panel (23942) and front door inside panel sound insulator (20394). Refer to Section 01-05 .
  1. Remove inside door belt weatherstrip.
  1. Remove front door window glass (21410) as described in this section.
  1. Remove two nut and washer assemblies attaching the window regulator equalizer arm bracket (23230).
  1. Remove four rivets retaining the front door window regulator base plate to door inner panel.
  1. Remove front door window regulator (23200) and front door window channel bracket (23288) from vehicle.
  1. Working on a bench, carefully bend tab flat to remove front door window regulator arm slides from front door window channel bracket.
  1. NOTE: Use care not to break tab; if tab is cracked or broken, replace front door window channel bracket. Make sure rubber bumper is installed properly on new front door window channel bracket, if replacement is made.

    Install new front door window regulator arm plastic guides into front door window channel bracket and bend tab back to 90 degrees.


    a9ef3ee.gif

Installation
NOTE: The front door window channel bracket and window regulator electric drive (23394) are installed into the vehicle as one assembly. The front door window channel bracket may be disassembled from the window regulator electric drive as described in Door Glass and Regulator, Power Windows .

  1. Install window regulator electric drive with preassembled front door window channel bracket into vehicle. Set the regulator base plate to door inner panel using base plate locator tab as a guide.
  1. NOTE: Two 1/4-20 x 1 inch bolts and two 1/4-20 nut and washer assemblies may be used as alternates for glass retention. However, torque must not exceed 4-7 Nm (35-44 lb-in). Equivalent metric retainers may be used.

    Install four rivets to retain front door window regulator to door inner panel.
  1. Install window regulator equalizer arm bracket.
  1. Lower front door window regulator arms to access holes in door inner panel. Install front door window glass as outlined.
  1. Install inside door belt weatherstrip.
  1. Adjust front door window glass to make sure it is properly aligned with glass run. Check window for smooth operation.
  1. Install front door trim panel and front door inside panel sound insulator. Refer to Section 01-05 .


    Door Glass and Regulator
ac1dac5.gif

Item Part Number Description 1 21410 Front Door Window Glass 2 23288 Front Door Window Channel Bracket 3 23394 Window Regulator Electric Drive 4 23230 Window Regulator Equalizer Arm Bracket 5 222A00 Front Door Glass Run Latch Side Retainer 6 N621906-S36 Nut and Washer 7 N800510-S36 Screw 8 23200 Front Door Window Regulator 9 W525172-S Rivet 10 W525175-S Rivet 11 — Wire Connector (Part of 14630 Wire Assembly) A — Tighten to 7-10 Nm (62-89 Lb-In)

Apr 13, 2009 | 1997 Ford Windstar

2 Answers

2002 Lincoln Navigator. Heater is not working, it blows cold air. I had the thermostat changed and it stills blows cold air. There is no water leaks under the dashboard. It takes about 10-15 min for...


try changing the thermostat if thats not it check and see if you have water leaking in the passenger side floor board if so then you need a new heater core

Jan 05, 2009 | 1999 Lincoln Navigator

Not finding what you are looking for?
2001 Jeep Grand Cherokee Logo

636 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...