Question about 2003 Ford Taurus

Open Question

2003 ford taurus - which hose on the transmission

2003 ford taurus - which hose on the transaxle cooler goes into the radiator. Which hose does it flow back into the transaxle

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 147 Answers

SOURCE: 2003 kia optima over heating

out from bottom to top

Posted on Nov 15, 2008

Ad
emissionwiz
  • 76848 Answers

SOURCE: how to remove 2002 ford taurus radiator

Remove the rad support cover, remove the electric cooling fan and shroud, disconnect the tranny cooler lines, drain the cooling system, remove the upper and lower hoses, remove the rad brackets on top of the rad (one on each side), have someone hold the AC core out of the way and carefully slide the radiator up and out

Posted on Nov 24, 2008

  • 34 Answers

SOURCE: ford taurus 2003 transmission, car runs but dont

check the fluid is it red or burnt does it do anything in any gear?

Posted on Jul 20, 2009

  • 6982 Answers

SOURCE: the transmission cooler line on the bottom that

As far as I know, that clip is not replaceable... (called a quick disconnect).
The entire tube assembly may be, and likely can be done by any decent radiator shop. Assuming the end part that broke is the radiator end. Otherwise, you will need to get a replacement line either from a dealer or from a scrapyard. There may be several "jury rig" options you could use to make a repair, but I don't recommend doing that there because of the location.(tight and difficult to reach) Jury rig is fine for stuck in the woods situations...do it right if you're home.

Posted on Jan 22, 2010

  • 2 Answers

SOURCE: bottom radiator hose 1994 ford taurus

You must partially detach the Front Passenger side tire

Posted on Jun 04, 2010

Testimonial: "he is right"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace the radiator on a 2003 Buick Lesabre


3.8L Engine

  1. Drain the engine coolant.
  2. Remove the upper radiator seal.
  3. Remove the upper tie bar.
  4. Disconnect the coolant overflow hose from the radiator.
  5. Plug the coolant overflow hose.
  6. Disconnect the upper and lower radiator hoses.
  7. Remove the transaxle oil cooler pipe bracket bolt from the lower tie bar.
  8. Remove the cooling fans.
  9. Slide the plastic cap off the transaxle oil cooler pipe quick connect fittings.
  10. Disconnect the upper and lower transaxle oil cooler pipes from the radiator.
  11. Remove the A/C condenser mounting bolts.
  12. Separate the condenser from the radiator.
  13. Lift the radiator up and out of the vehicle.
To install:
  1. Install the radiator to the vehicle. Place the bottom of the radiator in the lower pads.
  2. Install the condenser to the radiator.
  3. Install the A/C condenser mounting bolts and tighten to 115 inch lbs. (13 Nm).
  4. Push the upper and lower transaxle oil cooler pipes into the radiator quick connect fittings, until a "click" is heard.
  5. Tug gently on the cooler pipes to ensure proper retention.
  6. Slide the plastic caps (1) over the quick connect joints.
  7. Install the cooling fans.
  8. Install the transaxle oil cooler pipe bracket bolt to the lower tie bar and tighten to 89 inch lbs. (10 Nm).
  9. Install the upper and lower radiator hoses.
  10. Connect the coolant recovery hose to the radiator neck.
  11. Install the upper tie bar.
  12. Install the upper radiator seal.
  13. Fill the cooling system.
  14. Inspect the transmission oil level.

Nov 02, 2015 | Buick Cars & Trucks

1 Answer

Radiator installation on 2003 Kia Sorento


That is a VERY easy radiator.
Loosen radiator drain plug and drain coolant from radiator.
Disconnect cooling fan connectorsRemove upper and lower radiator hoses after marking them to ease installation.
For vehicles equipped with automatic transaxles, disconnect transmission cooler lines at transaxle.
Remove air conditioner condenser fixing bolts and radiator bracket fixing nuts.
Remove the radiator, radiator cooling fan, air conditioning cooling fan and transmission cooler lines from the vehicle as an assembly.
Transfer all necessary parts (fan assemblies, cooler lines, clips, speed nuts, fittings, etc.) to the new radiator.

Reverse procedure to install.

Fill and bleed cooling system.

Apr 14, 2012 | 2003 Kia Sorento

3 Answers

Transmission oil coming out the funnel


If you mean it is coming out of the fill/dipstick tube, then quit driving this car. You will trash the transmission, if it hasn't already happened. Usually when this happens the transmission cooler inside the radiator has busted, and is pumping coolant into the transmission. Then again I have seen some people just overfill it to the extreme. But either way it needs to be checked. This involves dropping the transmission oil pan.

Aug 08, 2011 | 2002 Ford Taurus

1 Answer

How do I remove the radiator form my 1997 ford taurus do I have to remove the bumper?


No,

Section 03-03: Engine Cooling 1997 Taurus, Sable Workshop Manual
REMOVAL AND INSTALLATION Radiator Aluminum Core, Crossflow
SPECIAL SERVICE TOOL(S) REQUIRED Description Tool Number Fuel Line Disconnect Tool Set T90T-9550-S
Removal
svh~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Do not mix Standard (green) Coolant with Extended Life Coolant (orange). If mixing occurs, drain engine cooling system and refill with originally equipped coolant type. If this contamination occurs, the service interval of Extended Life Coolant will be reduced from 6 years/150,000 miles to 3 years/30,000 miles.
  1. Disconnect battery ground cable (14301).
  1. Remove battery (10653) as described in Section 14-01 .
  1. Remove clip retaining contant control relay module and position module aside.
  1. Remove battery tray (10732) as described in Section 14-01 .
  1. Remove radiator cap (8100).
  1. Raise vehicle on hoist as described in Section 00-02 .
  1. Remove radiator splash shield.
  1. Drain engine cooling system as described in this section.
  1. Remove the radiator mounting bracket assembly.
  1. Remove lower radiator hose (8286).
  1. Partially lower vehicle.
  1. Remove upper radiator hose (8260).
  1. Remove radiator overflow hose (8075).
  1. Remove upper A/C condenser core retaining bolts.
  1. Remove upper transmission oil cooler tube clips.
  1. Remove lower transmission oil cooler tube (7C410)(EPN=7C410)using 3/8 Inch Fuel Line Disconnect Tool T90T-9550-C.
  1. Raise vehicle on hoist.
  1. Remove lower transmission oil cooler tube clips.
  1. Remove lower transmission oil cooler tube (7C410)(EPN=7C410)using 3/8 Inch Fuel Line Disconnect Tool T90T-9550-C.
  1. Remove transmission oil cooler bracket and position transmission oil cooler aside.
  1. Remove lower A/C condenser core bolts and position A/C condenser core (19712)aside.
  1. Remove radiator support bracket.
  1. Remove radiator (8005).

Jan 13, 2011 | 1997 Ford Taurus

1 Answer

How to change Radiator in 1999 Chevrolet Monte Carlo Radiator


Hello, here are the instructions for rad replacement

  • Remove air cleaner assembly and the throttle body air inlet duct. .
  • Drain the coolant.
  • ).
  • Remove the engine strut brace bolts from the upper tie bar and rotate the struts and braces rearward. Refer to one of the following:
  • • Engine Mount Strut Bracket Replacement in Engine Mechanical - 3.1L • Engine Mount Strut Bracket Replacement in Engine Mechanical - 3.8L
  • Remove the electric cooling fans.
  • Remove the radiator bracket bolts and the radiator brackets.
  • Use the J 38185 in order to reposition the hose clamp at the radiator inlet hose.
  • Disconnect the radiator inlet hose from the radiator.
  • Use the J 38185 in order to reposition the hose clamp at the radiator outlet hose.
  • Disconnect the radiator out let hose from the radiator.
  • Remove the coolant level module.
  • Disconnect the transaxle oil cooler pipes from the radiator. Refer to one of the following:
  • • Automatic Transmission Oil Cooler Pipes Replacement in Automatic Transaxle - 4T60-E • Automatic Transmission Oil Cooler Pipes Replacement in Automatic Transaxle - 4T65-E.
  • Remove the transaxle oil cooler pipes from the retainer at the bottom of the radiator.



  • Remove the radiator.
  • 9e65ca5.gif

    Jun 12, 2010 | 1999 Chevrolet Monte Carlo

    1 Answer

    How to remove and replace radiator on 1998 ford taurus


    1. Disconnect battery ground cable.
    2. Remove the battery.
    3. Remove clip retaining constant control relay module and position module aside.
    4. Remove battery tray.
    5. Remove radiator cap.
    6. Raise vehicle on hoist.
    7. Remove radiator splash shield.
    8. Drain engine cooling system.
    9. Remove radiator mounting bracket assembly.
    10. Remove lower radiator hose.
    11. Partially lower vehicle.
    12. Remove upper radiator hose.
    13. Remove radiator overflow hose.
    14. Remove upper A/C condenser core retaining bolts.
    15. Remove upper A/C transmission oil cooler tube clips.
    16. Remove upper transmission oil cooler tube (7C410) using 3-8 inch fuel line disconnect tool 310-041 (T90T-9550-C).
    17. Raise vehicle on hoist.
    18. Remove lower transmission oil cooler tube clips.
    19. Remove lower transmission oil cooler tube using 3/8 inch fuel line disconnect tool 310-041 (T90T-9550-C).
    20. Remove transmission oil cooler bracket and position transmission oil cooler aside.
    21. Remove lower A/C condenser core bolts and position A/C condenser core (19712) aside.
    22. Remove radiator support bracket.
    23. Remove radiator.

    May 07, 2010 | 1998 Ford Taurus

    1 Answer

    What is the procedure for removal of the radiator from the Mercury Mystique(1998 model)?


    Ford Contour/Mystique/Cougar 1995-1999 Repair Guide

    Radiator -REMOVAL & INSTALLATION
    (see Figures 1 through 7)

    7249321.jpg
    Fig. 1: Remove the upper radiator hose from the radiator


    d2d2436.jpg
    Fig. 2: Use a back-up wrench to remove the transaxle cooler line connections-automatic transaxle only


    3213ac8.jpg
    Fig. 3: the lower transaxle cooler line connection


    ec9272d.jpg
    Fig. 4: Remove the passenger side radiator mount and ...


    956cd3d.jpg
    Fig. 5: ... and the driver's side radiator mount


    f06fec0.jpg
    Fig. 6: The condenser can be support using mechanic's wire as shown here, or another suitable device


    242d821.jpg
    Fig. 7: Carefully lower the radiator out the bottom of the vehicle
    1. Disconnect the negative battery cable.
    2. Drain and recycle the engine coolant.
    3. Remove the upper radiator hose from the radiator.
    4. On 2.5L equipped vehicles, remove the radiator overflow hose from the radiator.
    5. On vehicles equipped with an automatic transaxle only, remove the transmission cooler line from the cooler inlet fitting and plug the line and the fitting.
    6. Remove the engine fan.
    7. Raise and support the vehicle.
    8. Remove the lower radiator hose from the radiator.
    9. On vehicles equipped with an automatic transaxle only, remove the transmission cooler line from the cooler outlet fitting and plug the line and the fitting.
    Remove the cooler lines while holding the radiator connector with a back-up wrench.
    1. Support the radiator, and A/C condenser with a jackstand or other suitable device.
    2. Remove the lower radiator supports from the front of the subframe.
    3. Remove the two retaining bolts for the A/C condenser from the brackets at the bottom of the radiator.
    4. Position the jackstand aside and remove the radiator out the bottom of the vehicle.
    To install:
    1. Carefully raise the radiator into place and support the radiator with a jackstand or other suitable device. Install the two retaining bolts for the A/C condenser into the brackets at the bottom of the radiator.
    2. Install the lower radiator supports and tighten the bolts to 71-97 inch lbs. (8-11 Nm).
    3. Remove the jackstand and install the transmission cooler outlet line (if equipped) and the lower radiator hose to the radiator.
    4. Lower the vehicle.
    5. Install and tighten the fan shroud nuts.
    6. Install the transmission cooler inlet line (if equipped) and the upper radiator hose to the radiator.
    7. On 2.5L equipped vehicles, install the radiator overflow hose from the radiator.
    8. Connect the negative battery cable.
    9. Fill the cooling system with the proper 50 / 50 mixture and start the vehicle.
    10. Bleed the cooling system and check for leaks.

    Hope helps with this (remember rated this help) Good luck.

    Jan 20, 2010 | 1996 Mercury Mystique

    2 Answers

    How to remove a radiator from a ford taurus


    Disconnect battery ground cable. Remove battery. Remove battery tray. Remove clip retaining contant control relay module and position module aside. Remove radiator cap. Raise vehicle front end as high as possible. Remove radiator splash shield. Drain radiator. Remove the radiator mounting bracket assembly. Remove lower radiator hose. Partially lower vehicle. Remove upper radiator hose. Remove radiator overflow hose. Remove upper A/C condenser core retaining bolts. Remove upper transmission oil cooler tube clips. Remove lower transmission oil cooler tube. Raise vehicle. Remove lower transmission oil cooler tube clips. Remove lower transmission oil cooler tube. Remove transmission oil cooler bracket and position transmission oil cooler aside. Remove lower A/C condenser core bolts and position A/C condenser core aside(be careful not to loosen the AC condenser lines. Remove radiator support bracket. Remove radiator out through the bottom of the vehicle.
    Installation
    Position radiator. Position radiator support bracket and tighten nuts. Position A/C condenser core and tighten lower A/C condenser core bolts. Position transmission oil cooler tube and install transmission oil cooler tube bracket. Install lower transmission oil cooler tube. Install lower transmission oil cooler tube clips. Install lower radiator hose. Install radiator mounting bracket assembly. Tighten bolts. Install radiator splash shield. Lower vehicle. Install upper tranmission oil cooler tube. Install upper transmission oil cooler tube clips. Install upper A/C condenser core retaining bolts. Tighten bolts. Install radiator overflow hose and tighten clamps securely. Install upper radiator hose. Position constant control relay module and clip securely. Install battery tray. Install battery. Connect battery ground cable. Fill and bleed cooling system. Start engine and inspect for leaks.

    Nov 25, 2009 | 1998 Ford Taurus

    1 Answer

    Fluid leaking up in engine area..if it is a line where is it


    So it is a trans fluid leak? Check the trans cooler lines (black rubber hoses about the thickness of an index finger) leading from the transaxle to the radiator. Air flow while driving and from the radiator fans will blow it every where.

    Oct 25, 2009 | 1999 Ford Taurus

    1 Answer

    I need 2 know how to remove the radiator


    THIS IS a 1995 LINCOLN CONTINENTAL W/4.6L ENGINE
    iIBELIEVE TOWN CAR IS DIFFERENT LET ME KNOW IF SO AND PLEASE DONT FORGET TO RATE ME


    REMOVAL
    1. Disconnect battery ground cable (14301).
    2. Drain engine coolant.
    3. Remove engine air cleaner (ACL) (9600).
    4. Remove upper radiator hose (8260) from water bypass tube.
    5. Remove radiator overflow hose (8075) from radiator (8005) and fan shroud (8146). NOTE: Loosen transmission oil cooler lines while securely holding radiator connector with a back-up wrench.
    6. Remove transmission oil cooler line from oil cooler inlet fitting.
    7. Remove nuts retaining A/C condenser core to the radiator.
    8. Disconnect engine control sensor wiring (12A581) from the auxiliary electric cooling fan motors and the CCRM.
    9. Raise vehicle on hoist.
    10. Remove splash shield from lower radiator support (16138) and front sub-frame (5C 145).
    11. Remove lower radiator hose (8286) from radiator. NOTE: Loosen transmission oil cooler lines while securely holding radiator connector with a back-up wrench.
    12. Remove oil transmission cooler line from oil cooler outlet fitting on radiator.
    13. Remove retaining screws for power steering/transaxle oil cooler and position cooler aside.
    14. Support fan shroud, radiator and A/C condenser core (19712) with a suitable jackstand. Remove lower radiator support. Position jackstand aside and carefully remove radiator and fan shroud.
    1. Remove two retaining bolts for fan shroud at top of radiator and remove fan shroud from radiator.
    2. Remove upper radiator hose from radiator.
    INSTALLATION
    1. Follow removal procedure in reverse order.
    2. Tighten fan shroud bolts and A/C condenser core nuts to radiator to 3-5 Nm (27-44 inch lbs.) .
    3. Tighten lower radiator support bolts to 8-11 Nm (71-97 inch lbs.) .
    4. Tighten transmission oil cooler lines to fittings to 25-28 Nm (18-21 inch lbs.) .
    5. Tighten power steering/transaxle oil cooler and splash shield retaining screws securely.
    6. Refill engine coolant.

    Feb 11, 2009 | 1995 Lincoln Continental

    Not finding what you are looking for?
    2003 Ford Taurus Logo

    Related Topics:

    78 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    76848 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    fordexpert

    Level 3 Expert

    5546 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...