Question about 1997 Chevrolet Cavalier
It sounds like you got everything. Sometimes they stick from being sealed for so long. Try tapping on it with something like a rubber mallet or placing a peice of wood on it and hitting the wood with a hammer that might break it free so you can remove it. If this helped please give me a thumbs up! Thanks
Posted on Sep 24, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Feb 03, 2016 | 1998 Chevrolet S-10 Pickup
Timing the Cam to the Crank
There are several ways to time the cam to the crank. Be sure to check the manual before you install the timing chain or belt.
If the old parts are available, carefully compare the new gears or sprockets with the old ones. Check the keyway and timing marks just in case there might have been an error made in manufacturing. Sprockets are sometimes stamped backward. Its much better to find the problem during assembly, rather than waiting until problems show up after reassembly and reinstallation.
Maintaining Valve Timing
During a valve job, it is essential to keep the timing chain or belt in place to maintain correct valve timing. Position the number one cylinder at TDC. Some overhead cam engines use a single long chain for a cam drive. The chain can be wedged against its guides with a tapered block of wood.
the chain tensioner on some ohc engines must be wedged to keep the chain in position during cylinder head removal. courtesy of nissan motors.
Some engines have a lower and upper chain. These engines do not require special attention to wedging the chain. Be sure to look for hidden head bolts and check the repair manual before removing the OHC head.
Dec 07, 2012 | 1989 Jeep Cherokee
Removal & Installation
Fig. Timing belt routing and timing marks-3.5L Engine
Fig. Timing belt and related components-3.5L Engine
Fig. Adjusting the tensioner pulley-3.5L Engine
Fig. Measuring the auto tensioner rod-3.5L Engine
Timing Chain, Sprockets, Front Cover & Seal
Removal & Installation
Fig. Timing chain and related components-3.8L Engine
Fig. Left timing chain markings and installation: (D) exhaust camshaft sprocket (C) intake camshaft sprocket-3.8L Engine
Fig. Right timing chain markings and installation: (C) exhaust camshaft sprocket (B) intake camshaft sprocket-3.8L Engine
Fig. Sealant application (1 inch bead width)-3.8L Engine
Fig. Timing cover sealant application-3.8L Engine
Fig. Timing cover gasket installation (A) gaskets-3.8L Engine
Fig. Timing cover bolt torque sequence and specification-3.8L Engine
May 19, 2012 | 2004 Kia Sedona
Feb 10, 2018 | Mercedes-Benz Mercedes E Class E320...
May 02, 2011 | Chevrolet Cavalier Cars & Trucks
Oct 19, 2010 | 2005 Toyota Corolla
Oct 11, 2010 | 2002 Honda CR-V
Oct 08, 2010 | 1998 Pontiac Sunfire
Aug 19, 2010 | 1999 Cadillac DeVille
Jun 30, 2010 | 1985 Nissan Pickup
43 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: