Question about 1996 Toyota Land Cruiser

1 Answer

Toyota Landcruiser drops out of/back into overdrive repeatedly

Hi I have a 1996 series 80 Toyota Landcruiser 4.5L auto that when cruising under no load condition intermittently drops out of and then almost immediatley changes back into overdrive, this usually happens several times in succession creating a very annoying rise and fall in engine revs that can only be stopped by turning the overdrive off. Also frustrating is that sometimes this will not happen for miles, other times it happens almost immediately - please can anyone help? Cheers Roo.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 432 Answers

Transmission servos sticking or bad valve body.take to trans shop for free diagnosis,most shops will do it for free.

Posted on Sep 24, 2009

  • dirtyg Mar 31, 2011

    I have same problem in a FEB 2000 100series Landcruiser with a confused gearbox!!! The box wants to sift between gears, E.G. if in 2nd will change down to 1st and back to 2nd. if in 4th will change down to 3rd and back to 4th 3rd 4th 3rd 4th 3rd 4th. it does this intermitadley and through all gears but not if accelerating or doing over 2200 rev. did you fix yours? if so what was it.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toyota 80 series GLX auto landcruiser 1996 need head bolt torque a nd cam shaft torque settings


Torque setting Toyota Land-cruiser 80 Series 4.5 1995-98
Engine code: 1FZ-FE, 1HD.
Stage 1: 20 Nm (Start tightening bolts from center to outwards)
Stage 2: 39 Nm
Stage 3: Rotate each bolt by 90 Degrees.
Stage 4: Further rotate each bolt by 90 Degrees

Nov 22, 2014 | 1996 Toyota Land Cruiser

1 Answer

1996 80 series landcruiser no low beams high beams are fine no spotties all work when pushed into high beams exept spotties and no high beam light shown on dash... Fuses all good blown relay that fused...


Hi Grant I believe that the fuses you are looking for are 7.5 amps and they are found in the fuse cabinet under the hood. If that fails try replacing the H4 bulbs, which I'm susspecting may have blown! Regards John

Apr 26, 2012 | 1996 Toyota Land Cruiser

1 Answer

I have an 80 series landcruiser with A442F transmission, built 1993. It will not select 1st gear or overdrive. It takes off in 2nd and shifts to 3rd normally, 1st gear can be selected manually and changes...


It seems like your "2nd start" button is turned on. The 80 series LC has a button next to the shifter which allows it to start in 2nd gear. If the button is not engaged then there could be a problem with the circuit, but that is not common

Nov 01, 2010 | 1994 Toyota Land Cruiser

2 Answers

100 series toyota landcruiser diesel 1hz, engine surging at light throttle and cruising at approx. 60kph. Blows a puff of black smoke from exhaust occasionally.


Landcruiser 100 vx, 2003 model with engine number 1HD-FTE is not starting, I've found out that the fuel pump, starter, battery are all functioning well. Where next should I look at.

May 15, 2010 | 2001 Toyota Land Cruiser

1 Answer

Landcruiser electrics


clean all your battery conections and make sure that they are firm

Jan 29, 2009 | 1996 Toyota Land Cruiser

1 Answer

How to change the headlight on a 1991 toyota landcruiser


you should be able to take the light out from the front after removing the grille and headlight surround, this is if it what we call in Australia a "80 series" landcruiser.

Dec 08, 2008 | 1996 Toyota Land Cruiser

1 Answer

2009 Toyota Camry problems


All Toyota auto trans cars downshift when descending a hill when you tap the brake. This is called "Downhill Shift Logic"; what this is for is to eliminate the double shift when you come to the bottom of a hill and then accelerate. Normal condition. Usually happens above 38 MPH.
Also: The cruise will accelerate when going uphill. Normal condition.Plus: The cruise will not disengage back to the set MPH after you top the hill. Toyota recommends to disengage the cruise when encountering steep terrain.

Sep 09, 2008 | 2008 Toyota Camry

1 Answer

1986 toyota landcruiser - auto box - quick chance setup kit for valve plate


Fitting an overdrive auto or a 5speed manual transmission will give a little more top end ......or..... fit larger tyres. V8 should have enough torque to cope well at lower speeds.

Jul 16, 2008 | 1986 Toyota Land Cruiser

Not finding what you are looking for?
1996 Toyota Land Cruiser Logo

444 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...