Question about 1998 Chevrolet Cavalier

1 Answer

Wont start coils new coil model still wont crank. no fire no gas

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 436 Answers

Check the ignition switch. pull covering off of the column and check switches wires,
reds - should have +12 battery power
white - Ignition output
pink - ignition output
yellow - starter output

these wires are needed to start car.

from the switch the starter wire goes to and neutral position switch. located on transmission. yellow is starter in purple is starter output. if all that is good change the relay moun about the radiator. good luck

Posted on Sep 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It mayI have no fire going to the coil or from the coil to the plugs


Have you checked the wiring, the spark @ plug, Power to the coil???

Engine Won't Start No Spark - Auto Diagnosis Repair Help

aa1car.com/library/no_spark.htm
If your engine cranks normally but will not start because it has no spark, or it ... If an engine has a coil-on-plug ignition system with no plug wires, remove one of ...

No-start, No-Spark diagnosing simulated - YouTube

? 5:13
https://www.youtube.com/watch?v=XSWN1M8Hoqo
May 19, 2010 - Uploaded by FrankHurtAuto
Simulation of no start with no spark diagnosing, ... Ignition coiland module test with test light (ScannerDanner Premium lecture) - Duration: ...

getting fire from coil but not to plugs - CarGurus

www.cargurus.com > Questions > Dodge > Ram 1500

CarGurusJun 12, 2013 - 2000 dodge ram 1500 4x4 not getting fire changed distributor cap, coil, pickup ignition, rotor, plugs, plug wires 2 answers. ... 1994 dodge 5.9 just shut off and wont start back up there is no spark or fire from coil or plugs. ... 94 dodge van 318 eng will not start new plugs new crank ...

Ignition Coil Troubleshooting: (No) Fire in the Hole

www.secondchancegarage.com/public/coil-troubleshooting.cfm

Jan 27, 2016 | Cars & Trucks

1 Answer

My 2000 Chrysler 300m wont start it turns over but wont fire its getting gas but wont fire


Are you certain it's getting gas, does it smell flooded?
Pull one of the plugs, see if its wet after cranking.
Ground plug and check for spark, if no spark, problem could be crank sensor or coil packs.

Aug 30, 2013 | Chrysler Cars & Trucks

1 Answer

Coil wont fire all three wires have power but no fire to plugs replaced twice


Crank sensor if it has one,timing belt skipped is a possibility,and always the dread security key problem.don-ohio

Apr 01, 2013 | 2001 Ford Focus

2 Answers

It turns but it wont start,it has gas and power


Pull off the coil ignition cable at the distributor and check for spark coming out of coil when cranking engine over. Use a heavy rag or glove to hold the wire 1/4 inch from a metal ground. Should see a strong blue spark when cranking to verify ignition is good. If no spark, check for battery voltage to coil on the coil primary. If you have current to the coil, suspect a bad coil, ignition module, crank position sensor, or cam position sensor, or pcm. The coil, ignition module, and sensors can be tested before replacing.

Jan 29, 2013 | Cars & Trucks

1 Answer

My 2000 sable turns over but wont start engine light on but pulls no codes


i have a 2000 mercury sable wont start. its getting gas, but not getting fire. i change the crank sensor an the coil pack but still no spark from the coil

Sep 15, 2012 | 2000 Mercury Sable

1 Answer

Cranks wont start, 98 Durango


check to see if getting fuel or if you smell gas when cranking if you smell gas you probably have a spark problem which will probably be a coil and or a pickup coil in your distributor replace coil and then distributor. If you are not getting gas most likely fuel pump in tank see if it will fire on starting fluid then replace fuel pump good luck

Feb 05, 2010 | 1998 Dodge Durango

3 Answers

1999 S10 will crank over but will not start.


Check the air gap on the crank shaft sensor, if it does not have a .50 gap it will not send signal to fire coil pack repy to this post if you need more help.

Aug 30, 2009 | 1992 Chevrolet K1500

2 Answers

Car wont Fire up / start / ran perfect


ignition coil could be hold ur petal down to the floor after pumping it a few times let the gas get there see what happens

Aug 25, 2009 | 1998 Ford Mustang

Not finding what you are looking for?
1998 Chevrolet Cavalier Logo

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...