Question about 2001 Dodge Ram 2500 Truck

2 Answers

My Service engine light came on my 2001 2500diesel Truck any suggestions

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,111 Answers

Hi bbprinting, if you dont have a code reader, go to your local auto parts store to have your truck scanned. most all reputable auto parts stores do this for free.

once you have the code they should be able to tell you why the light was set and might recommend something or you can post the code here and someone will help you figure out why the light was set.

after they check for the code, you can have them reset it to make the light go out. sometimes the light will be set for something simple like a misfire that may or may not return again.

bill

Posted on Sep 24, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 83 Answers

If you handy around a car, get that code read from auto parts store (free), and get a service manual, best place I've found is promanuals.net, they have complete factory service manuals and great customer service.

Posted on Sep 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cant get the service engine light to go off and I don't have the truck manual


Take your truck to your local auto parts store or repair garage, and have them attach an ODB code reader to your truck to readout the error codes and reset the SERVICE ENGINE light.
Please note that the SERVICE ENGINE light only comes on when SOMETHING IS WRONG. If you do not want it to come back on, you will need to establish where the failure is and fix it.

May 12, 2015 | Cars & Trucks

2 Answers

Engine lite


time to take it to the service centre.

Jun 11, 2008 | 2005 Ford Escape

1 Answer

05 gmc sierra 3500 6.6 duramax had the service 4wd abs light and eBrake light come one also the line showing what gear its in went away shut the truck off went too restart and truck wouldn't start jumped...


You probably have a trouble code stored in the engine computer for a faulty transmission selector switch. The engine computer thinks the trans is in 3rd gear and not park. Or it really could be stuck in third gear.

Aug 24, 2014 | 2005 GMC Sierra

1 Answer

I drove with my son the other day when my service engine light came on and my truck lost power (95 Z71) . we made it home and the light went of. we replaced plugs and wires but the truck still barely runs...


Read the check engine error code for a place to start (large auto parts stores will have a scanner for use at their location, and they may even scan the code for you and tell you what it means). Good luck.

Sep 30, 2013 | 1995 Chevrolet C1500

1 Answer

I have a 2008 Chevy Avalanche with about 62,000 miles. Have a check engine light that OnStar diagnosed as PO442. Said I should wait 7 days and if still have check engine light, take it in for service. ...


you have a small leak in your evaporative emission system.the first thing to check is your gas cap.make sure to tighten it until it clicks three times.have the code cleared and see if the code comes back.

Jun 02, 2011 | Chevrolet Avalanche Cars & Trucks

1 Answer

2007 check engine light is on. The truck is running great


Getting the car scanned is advisable.Check engine light on?
The check engine light comes ON when the cars computer (the ECU) notices any kind of electrical problem in car. In some cases the check engine light comes on then turns off. In that case the exact error is not getting confirmed so this happens. But once the problem gets confirmed the engine light will remain permanently ON till the problem gets solved. In this case I suggest you to get your car scanned at autozone service center. It's absolutely free. In case in car scanning, if any error code is retrieved then you can check which part is faulty as per the error code.--------------- This should help.Thanks.Helpmech.

Feb 01, 2011 | 2007 Chevrolet Tahoe

2 Answers

2002 Tahoe Dropping Cylinder


A tune up will not cure the lean code, in fact an engine miss gives a rich code from the unburned fuel. I would suggest u verify u have no vacuum leaks, also clean the inside of the MAF sensor if so equipped and replaced the bank two O2 sensor, that is the passenger side sensor before the catalytic converter. If u have the money replace both right and left sensors, it is better to do them in pairs.

Jan 15, 2009 | 2002 Chevrolet Tahoe

2 Answers

98 C1500 Silverado ''service engine soon'' light


the service engine soon lite comes on due to an input sensor to your vehicles computer that has gone out of its parameters. this lite does not come on due to mileage. the computer needs to be scanned for code #'s in order to diagnose correctly. autozone will scan codes for free. if you get me the code #, ill try to assist further, otherwise you may want to see your local garage.

Nov 22, 2008 | 1998 Chevrolet C1500

1 Answer

Service engine light


try unplugging the battery leave it off for like 5 minutes then plug it back in

Oct 29, 2008 | 1998 Chevrolet C1500

1 Answer

3.9 v6 4x4 check engine light, runs rough


Replace the ECT sensor.
And letme know. If you feel any diference. ok.

Aug 15, 2008 | 1998 Dodge Dakota

Not finding what you are looking for?
Cars & Trucks Logo

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...