Question about 1995 Subaru Legacy

1 Answer

Check ingen licht on

Diagnostic touble code po101

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,515 Answers

Engine load or the air volume entering the engine is measured by these components.The computer has recognized a return signal error as I will list some probable causes.#1 Vacuum hose off, cracked, or passage blocked. #2 Throttle body intake tube loose,off,or cracked.#3 BARO (Barometer) /MAP (Manifold absolute Pressure) defective #4 VAF (Vane Air Flow) MAF (Mass Air Flow) Sensor Dirty or defective. These are most all of the conditions for the code. It would be a good idea to pick up a manual for you're auto to help you futher. You may be able to look things over with a manual that will point out where these componants are located. I am not saying all 4 have a problem, just that they would cause this code.You will need an OBD-2 meter to check and clear these codes.
Good Luck and feel free to contact me.
Sincerely, shastalaker7

Posted on Oct 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whats the fix for gm code po101 p0113 p0446


Testing diagnostic's associated for the codes is how to find the fix. Assuming as to a fix would only be a guess . Your best bet would be to take it to a qualified repair shop .OR you could look on youtube .
P0101 GM Digital Mass Air Flow Sensor Diagnostics and Troubleshooting by...
P0113 OBD II DTC Engine Code for 2002 Chevy Trailblazer
EVAP Vent Solenoid Code P0446


Aug 09, 2017 | Cars & Trucks

1 Answer

Po101 code


Before replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with low compress air or mass air flow sensor cleaner. Reset code and drive vehicle. Check for air leaks on or around any intake pipework using a good spraying of carb cleaner, if the engine surges then that's the leak. Check wiring to Maf and if the inside is dirty, again use carb cleaner liberally...NOTE: do not use Wd40... If the code comes back, it may be necessary to replaced the mass air flow sensor.

Jun 04, 2014 | 2000 BMW 3 Series

1 Answer

Diagnostic touble code on emission test code p1440


Type: Infiniti OBD P1440

Appears to be a small evap system leak

Apr 01, 2014 | 2001 Infiniti I30

1 Answer

I have a 1997c1500 check engine light is on i put a computer on it the code is po101 can anyone tell me what i need to do to fix the problem so i can pass the e check


Basically this P0101 diagnostic trouble code (DTC) means that there is a problem with the Mass Air Flow (MAF) sensor or circuit.The malfunction indicator lamp (MIL) will illuminate. the simplest thing to do is to reset the code and see if it comes back.






Mar 08, 2014 | Chevrolet Cars & Trucks

1 Answer

Is there fusies goijg to you o2 sensor if so could that make my 2002 chev truck lack power got alot of codes po157 po101 po161 po 135 and po300 any help


yes check fuses for contact problems this is the one in the engine compartment also replace fuel filter check battery for being weak check fuel pressure and check for vacuum leaks also for code po101 replace air filter. the codes may say low voltage but what it really means is the time it takes for the o2 sensor to heat and switch lean can mean low voltage if it were high voltage we would check for a short circuit

Apr 06, 2013 | 2002 Chevrolet Silverado 1500

1 Answer

2006 Volvo xc90 trouble code po101


did you reset code,any vacuum leak.

Mar 08, 2013 | Cars & Trucks

1 Answer

Po101 , po101pd, po128, po446 diagnostic codes for 2000 s10 blazer


While I don't have your specific book, the GM's of this world and many models employ similiar codes. PO 101 should be your MAF sensor (Mass Air FLow) and something equally with 101pd. The sensor itself is probably located on or near the air duct between your filter to the engine throttle body. As for the rest, they are related with the emissions control as well. Sometimes, when you have multiple sensors readouts, and you're not sure where to start, start cheap, and go from there, as sensors can trip the other sensors. Hope that helps

Feb 16, 2011 | 2000 Chevrolet Blazer

2 Answers

Hi, I have, 2001 Nissan Maxima. Get check engine lite. Car now has 60k miles. Local mechanic had already replaced two O2 sensors 9 months ago. I don't know what the codes were at that time. Check Engine...


renew the O2 sensors to start with and just hope that its a bad sensor on this bank they can break down prematurely .Luck of the draw their when buying new parts iam afraid your not the only one to buy new parts and have them go early .

Jan 18, 2011 | 2000 Nissan Maxima

1 Answer

Hoe reset IK EEN W210 bj 1997. Ik bedoel als hij aangeeft dat je de service overschreden hebt


DE GARAGE IS TE VERONDERSTELLEN KIJK JE AUTO UITSTOOT EN DOE EEN DIAGNOSTIC CHECK.MAKE ERVOOR DAT ALLES GOED WERKT CONDITIONS.THE GARAGE HEEFT OM UIT TE SCHAKELEN SERVICE ONDERHOUD LICHT.

May 12, 2010 | 1994 Mercedes-Benz C-Class

1 Answer

My 1990 Toyota Celica is hesitating when i released the clutch and sometimes it seems that is going to die out even though i am pressing on the acceleration paddle and also the idle is too high... I do not...


is the check ingene light on? if so get the code you will need a OBD1, if not it probably nothing more than attention to your filters, plugs or wires. you can also get the codes manualy by jumping the right wires on the diagnostic conector and looking at the light blinking in code. another thing to check is the vacc.. lines a big enough leak will do the same.

Jan 12, 2010 | 1990 Toyota Celica

Not finding what you are looking for?
1995 Subaru Legacy Logo

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...