Question about 2009 Honda Ridgeline

1 Answer

HID will not funtion hooked up right. They won't light. Everthing works as it should hit hi beams fog lights go out hi beam light comes on inside on dash. Its easy hookup maybe missing something? This is a conversion kit.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 733 Answers

Yeah, shouldn't be that difficult. red-power, black-ground. unplug them then put everything back to normal, then try them to see if the originals(low beams, high beams, fog lights) work ok. if they do it's in the wiring. turn on your low beams and that's the wires that you need. just find the one that sends 12volts to the low beams and hook it up to red on HID's then hook the black(ground) from HID to chasis, not the ground wire from car and check to see if they work.

Posted on Sep 24, 2009

Testimonial: "Nobody suggested this sounds good. I'll try in morning. Thanks a lot"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a dirt bike with headlight. Three wires for hi/lo, how do I put two fog lights in place of that head light without too much wiring work. I don't need hi/lo option


one wire will for high beam
one wire will be for low beam
the last wire will be ground wire
as fog light have only one beam you can use the low beam wire and parallel wire it to the fog lights
that way you have the head lights still and the fog lights as accessories correctly wired according to regulations
how to do it simply-- find the low beam power wire ( light switch on low beam and power at the light bulb check ed with a multi meter set on volts
solder , piggy back, or double plug in a connection into that wire and run one wire to the left fog light and one to the right fog light connect each fog light to an individual ground wire and connect those wires back to the ground wire for the main lights
Now having done that simple addition to the lighting system another problem has come up
The wiring will now be too light to carry fog light current and or the light switch will burn out
To over come this problem, the circuit needs a relay
fit a relay on the bike and now run the low beam wire to a terminal of the relay
run the other terminal wire to ground
this enables the relay to operate when the low beam is switched on but at this will not switch on the lights yet
now you have to run a heavy gauge wire (fused at the battery) to one of the power terminals of the relay and from the other power terminal to the connection for the fog and low beam lights
Now it all works switch on the high beam and no for lights
change to low beam and the fog lights come on as well
All nice and legal
Of course if you don't care about being legal just buy a 30 amp toggle switch and run a fused wire directly to the switch from the battery to the lights and then to ground from the lights
You will know that the generator / alternator for the bike will not be able to run the fog lights with or without the main lights so what will you have achieved

Feb 28, 2016 | Cars & Trucks

1 Answer

Is my 2007 Lincoln Navigator (HID headlights) equipped with HIGH BEAMS? If so - they don't seem to work. Allow me to explain; 1. The headlights come on automatically in low light conditions. 2. The...


First of all are your headlights a double filament type headlight? If yes then I would suspect that a power wire to the high beams is broken or shorted. If your high beams are a separate set of lights from your regulars running lights then either the high beams headlights are missing. or has a broken power wire or shorted or...You could check the fuse box under your dash and under the hood of the car to see if you have a fuse for the high beam lights.

Oct 28, 2013 | Cars & Trucks

2 Answers

I have a 1995 Ford Explorer Limited and the high beams work but the low beams and fog lights do not, please help....


These trucks are known for bad multifuction switches.
the switch that i talk of is the signal switch , the handle is the switch, it bolts to side of steering column . this switch controls the signals and the headlights and high /low beams. the other thing is the headlight switch connector, the connector some times goes bad and starts to melt or just comes out of the connector. you will need to remove the cover to steering column, the screws are located under the bottom cover in holes. remove cover and check connector and then test for power if you have power going into switch but not coming out then switch is bad.

the last thing is to make sure the bulbs are good , make sure the headlight bulbs are good , and also the driving light bulbs, test for power at the connectors to those lights to.
You will need to do a little testing to find the problem.

Nov 22, 2012 | Cars & Trucks

1 Answer

High beam indicator comes on with fog lights


Could your Mazda have daytime running lights? If you checked all fuses, did that include the three in the joint box?

There is an auto light-off control module that is central to all functions you describe. It is assumed that you would only turn on the fog lights with headlights on and set for high beam. If you set the headlight switch to LOW, the module closes the headlight relay to turn on the low beams. If you then turn the headlight switch to HIGH, the module turns on the high beams and allows you to turn on the FOG LIGHT switch, closing the fog light relay and turning on the fog lights. Since this sequence is not working, I suggest checking both high beam lamps as both could be burned out. Other possibilities are a defective headlight switch or the module

Oct 01, 2012 | 2005 Mazda 6

1 Answer

I have a 1993 Mercedes and about a month ago while driving the hi beams quit as I clicked from lo beam. Now a week ago lo beam quit. To get by I was using the fog beams. Last night I turned the selector...


First check the fuses. The fuse must be in the main fuse box. The position and function of the fuses is normally marked on the inside of the fuse box cover and also in the owner's handbook. If you don't come right with these, work your way through the fuses looking for a blown one. If you find that the problem is not in the fuses, then your next option is the relays or the light switch itself, I doubt if all the bulbs would blow like this.

Feb 22, 2011 | 1993 Mercedes-Benz Mercedes Benz 400 Class

1 Answer

Low Beam Lights Won`t Work


you need to change the dimmer switch it has gone out

Mar 09, 2009 | 2002 Pontiac Grand Am

1 Answer

I want to use fog lights with high beams


hi,
you could just run a possitive wire from the back of your high beams straight to your fog lights then earth the fog lights stright to the car. this will work just make shure you disconnect your battery before playing with the wire's. if your not sure what you are doing i would recommend you take it to an authurised electrican. as for the high and low, same system but i would say it probably would over load the fuse creating more work for you.

Jan 05, 2009 | 1998 Honda Passport

2 Answers

High beams wont turn on.


First place to start is with headlight switch. I did have a case many years ago when both high beams were blown out at once, but this is rare. When you have the headlight switch out, jump power from te low beams to the high beam contacts. If high beams come on, replace switch.
Bill

Nov 19, 2008 | 2004 Ford Explorer Sport Trac

Not finding what you are looking for?
2009 Honda Ridgeline Logo

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...