Question about 1995 GMC Jimmy
Are you getting fuel and check for spark and if all is well, then move to your fuel pump and if checks out okay , ignition module and pick up module and coil have checked out .
Posted on Sep 24, 2009
Where is gas filter located for 1995 gmc jimmy.
Posted on Jun 01, 2011
Need more information has spark or fuel ?
Posted on Sep 24, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 95 gmc jimmy engine codes
9141 does not exist I will assume it is DTC P0141 HO2S Heater Performance Bank 1 Sensor 2
The VCM has the capability to monitor this process by using the Heated Oxygen Sensor (HO2S Bank 1, Sensor 2). The HO2S (Bank 1, Sensor 2), located in the exhaust stream before the catalytic converter, produces an output signal which indicates the storage capacity of the catalyst; this in turn indicates the catalysts ability to convert the exhaust emissions effectively. If the catalyst is functioning properly, the HO2S signal will be far less active than the signal produced by the Heated Oxygen Sensor (Bank 1, Sensor 1).
When the HO2S temperature measures below 360°C (600°F), the sensor will not produce any voltage and will behave like an open circuit. This will result in an Open Loop operation.
The HO2S heater provides for a faster sensor warm-up which allows the sensor to become active in a shorter period of time and remain active during long extended idle. The DTC P0141 determines if the HO2S is functioning properly by checking the response time of the sensor. This DTC is a type B DTC.
Posted on Dec 06, 2008
u will need a steering wheel puller,u will have to disharm and take airbag off if equip.,i would suggest to get manual it explains step by step procedure!
Posted on Apr 25, 2009
SOURCE: turns over but will not start.
FIRST CHECK THE LEAST EXPENSIVE PARTS: THE FUSES AND RELAYS. THEY ARE UNDER THE DASHBOARD BELOW THE STEERING WHEEL. IF THEY ALL CHECK OUT THEN THERE COULD BE MANY OTHER REASONS WHY IT WON'T START. SUCH AS A CRANK POSITION SENSOR OR A BROKEN TIMING CHAIN. CHECK IT OUT AND GET BACK TO ME WITH A BUNCH OF INFORMATION. IF YOU WANT TO CHECK FOR A CODE IN THE COMPUTER THEN FIND THE DIAGNOSTIC PORT JUST UNDER THE COLUMN AND THERE WILL BE 8 PINS ON THE TOP AND 8 PINS ON THE BOTTOM. JUMP THE #5 AND #6 PIN ON THE TOP ROW WITH THE KEY ON AND COUNT THE FLASHES OF THE CHECK ENGINE LIGHT. THIS WILL GIVE THE CODES TO YOU. HOPE THIS HELPS. LET ME KNOW PLEASE. GOOD LUCK AND THANKS FOR USING FIX-YA.
Posted on May 05, 2009
SOURCE: 2000 GMC Jimmy won't start
i had the same problem and replaced the fuel pressure regulator. Cost about $45 at advance auto store or about $90 at napa auto stores. Once i replace that my truck started right yup and runs like a champ
Posted on Jul 13, 2009
Tips for a great answer:
Jan 03, 2015 | Cars & Trucks
Aug 07, 2014 | 2001 GMC Jimmy
Jul 25, 2012 | 1995 GMC Jimmy
Jul 15, 2011 | 1992 GMC Jimmy
Apr 03, 2011 | 1995 GMC Jimmy
May 09, 2010 | 1995 GMC Jimmy
Sep 04, 2009 | 2001 GMC Jimmy
571 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: