Question about 2003 GMC Sierra 2500HD

1 Answer

Service 4wd message appears when shifting into 4h and 4l only does this once in a while just wondering if it is because of low fluid in the trandsfer case

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 47 Answers

Could be but chevy truck have a common problem with the 4wd system
you have to replace some kind of actuator mounted in the mechanism inside the motor the one is attached to the transfer case to switch the 4wd system,you need to get the motor out and work with it in the work bench for furter information about it explain to you dealership parts guy cost around 130 bucks and if you do it your self mark the position of the sprocket or gear when you open it to avoid mistakes and have to take out again because the gear teeths have a position to make the device fit back on the transfer case

Posted on Sep 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I turn 4wd on?


    • 1 Start your Dodge truck's engine.
    • 2 Turn the electronic transfer case from "2WD" to "4WD Lock" to engage the high range 4WD, if the dodge truck is equipped with an electronic transfer case; otherwise, shift the transfer case lever from "2H" to "4H." The electronic transfer case is located on the instrument panel and is marked with "2WD," "4WD Lock" and 4WD Low." The lever-equipped transfer case is located to the right of your leg and is marked with "2H," "4H" and "4L."
    • 3 Shift the transmission into "Neutral" while the vehicle is either stopped or rolling at 2 to 3 mph to begin engaging in the low range 4WD. Turn the electronic transfer case to "4WD Low," if the Dodge truck is equipped with an electronic transfer case; otherwise, shift the transfer case lever from "2H" or "4H" to "4L."
    Tips & Warnings
    • Indicator lights will come on and alert you that your vehicle is in either the high or low range of 4WD.
    • Do not engage in the low range of 4WD drive if the transmission is in gear; you must shift to "Neutral" first.
    • Many Dodge trucks allow you to shift from 2-wheel drive to the high range of 4WD at up to 55 mph--consult your truck's manual to ensure that this is possible. Do not exceed 55 mph while engaged in the high range of 4WD. Do not exceed 25 mph while engaged in the low range of 4WD.
    • Do not engage in 4WD unless you are on slipper or rocky roads.

Sep 02, 2011 | 2005 Dodge Dakota

1 Answer

HOW TO SHIFT TO 4 WHEEL DRIVE


Hi - Here is instruction how to do.

From N to 4H

Stop the vehicle completely, place the

transmission in "N" (Neutral) and depress

the brake pedal and the clutch pedal fully

(if equipped), then push in and turn the

switch to shift into "4H".

From 4H to 4H LOCK

You can operate the transfer switch either

when the vehicle is stopped or while the

vehicle is moving.

Position the front wheels straight ahead

and turn the switch to shift into "4H LOCK".

If the vehicle is moving, we recommend

that the speed be less than 100 km/h (60

mph) during this operation.

NOTE:

• When shifting between the transfer

switch position and the transfer gear

position is unmatched, all 4WD indicators

will blink and the buzzer will sound.

• If it is difficult to shift between "4H" and

"4H LOCK" while the vehicle is moving,

try accelerating and decelerating your

vehicle several times after turning the

transfer switch. Be sure to wait until traffic

conditions allow you to accelerate and

decelerate safety before using this procedure.

From 4H LOCK to 4L LOCK

Stop the vehicle completely, place the

transmission in "N" (Neutral) and depress

the brake pedal and the clutch pedal fully

(if equipped), then push in and turn the

switch to shift into "4L LOCK".

From 4L LOCK to 4H LOCK

Stop the vehicle completely, place the

transmission in "N" (Neutral) and depress

the brake pedal and the clutch pedal fully

(if equipped), then push in and turn the

switch to shift into "4H LOCK".

From 4H LOCK to 4H

You can operate the transfer switch either

when the vehicle is stopped or while the

vehicle is moving.

Position the front wheels straight ahead

and turn the switch to shift into "4H". If the

vehicle is moving, we recommend that the

speed be less than 100 km/h (60 mph) during

this operation.

NOTE:

• When shifting between the transfer

switch position and the transfer gear

position is unmatched, all 4WD indicators

will blink and the buzzer will sound.

• If it is difficult to shift between "4H" and

"4H LOCK" while the vehicle is moving,

try accelerating and decelerating your

vehicle several times after turning the

transfer switch. Be sure to wait until traffic

conditions allow you to accelerate and

decelerate safety before using this procedure.

From 4H to N

64J209

Stop the vehicle completely, place the

transmission in "N" (Neutral) and depress

the brake pedal and the clutch pedal fully

(if equipped), then push in and turn the

switch to the mark (1) at the left of the "N"
position, and hold the switch in this posi-

tion for 5 seconds until the "N" indicator

blinks, then turn the switch to the "N" position.

When you turn the transfer switch to the

"N" position, "N" indicator will come on with

the buzzer sound.

CAUTION

• Be sure to stop the vehicle completely

before operating the transfer

switch to shift between "N" and

"4H", or between "4H LOCK" and

"4L LOCK".

• Do not shift between "4H" and "4H

LOCK" unless the front wheels are

in the straight-ahead position and

we recommend that the vehicle

speed be less than 100 km/h (60

mph).

Do not operate the transfer switch

while tires are racing.

• Do not operate your vehicle in "4H

LOCK" or "4L LOCK" on dry, hard

surfaces.

(Continued)

CAUTION

(Continued)

• Do not operate the vehicle while a

4WD mode indicator is blinking

except when shifting between "4H"

and "4L LOCK".

If you operate the vehicle while a

4WD mode indicator is blinking, a

buzzer will sound and the transfer

will shift to "N" (Neutral) to prevent

transfer case damage.

In this case, use the following procedure.

1) Depress the clutch pedal fully (if

equipped) or shift the automatic

transmission gearshift lever to the

"N" position.

2) Turn the transfer switch to the

position previously selected.
3) Operate the transfer switch again.

Feb 01, 2011 | 2007 Suzuki Grand Vitara 4WD

2 Answers

4runner 92 4WD problem


This might sound like a silly question but did you put the truck in neutral before you shifted into 4L ? Reason being transfer case damage can occure if it wasnt in neutral when you shifted into 4L.

May 10, 2010 | 1992 Toyota 4Runner

1 Answer

99 GMC Sierra 4X4 kicks out


Check/change transfer case fluid and check the wire connection to it.

Mar 25, 2017 | 1999 GMC Sierra

1 Answer

2005 chevy 1500 HD, 4 low will not engage.


I cannot understand why u would ever need 4L but anyway try this: after not working once move your vehicle about 6 inches backwards then try again. if no results move veh fwd about 6 inches and try again. if this doesnt word, im lost. good luck. ps: dont engage emerg brake

Jul 29, 2009 | 2005 Chevrolet Silverado 1500HD

2 Answers

GMC Sierra "service 4WD message" Need Help!


If it will run in 2wd or 4H, you should be fine. May be just a solenoid in the transmission.

Apr 12, 2017 | 2004 GMC Sierra

3 Answers

I just bought a 2001 blazer 4.3 4wd and it was stuck in 4 low


It should tell you on the Shifter whether or not that you can Shift on the Fly. Check the Manual first if there is one in the Truck. Some Models had this and some Did not. Was an Extra from Factory Option.

Dec 31, 2008 | 2001 Chevrolet Blazer

1 Answer

4WD Problem


I would first check the wires on the transfer case for possible damage at the 2wd/4wd switch.

Oct 08, 2008 | 1997 Toyota 4Runner

Not finding what you are looking for?
Cars & Trucks Logo

243 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...