Question about 1995 Ford F150 Styleside Regular Cab

1 Answer

My 1995 f-150 automatic will shift from 1st to 2nd fine but does not want to shift into third. Is this an electronic problem or possible internal wear? It has also been using auto trans fluid. Tonight I had to add quarts.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 118 Answers

It depends it could be a bad servo for the 3rd gear trans or it could be that 3rd gear clutch is worn out
Only way to sepearte these problems is to have the trans pressure tested and distinguish the problems

Posted on Sep 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On a 2001 Blazer ZR2 1st and 2nd shift fine but when it hits 35mph it doesn`t seem to want to shift to third. What id wrong and will I need a new transmission?


Check out your fuse box and look for a fuse for the torque converter some automatic transmissions have a fuse for the torque converter check it out and see if it's blown.

Feb 19, 2014 | 2001 Chevrolet Blazer

1 Answer

Shifts into 1st and 2nd gear, but not into drive


Well go get your car fixed by a mechanic or it something might be jammed inside

Feb 12, 2014 | 2001 Dodge Intrepid

1 Answer

2000 Nissan Quest slow shift to third gear (automatic). What would you suggest


Why are you shifting?Use drive,reverse and park,changing gears makes it get slow in time,wearing your transmission out.

Feb 02, 2014 | 2000 Nissan Quest

1 Answer

MY 99 FI50 WONT HIFT IN TO 3R SHIFTS N PULLS FINE FROM 1ST TO 2ND THOUGH


If it wont shift at all, its very likely computer related. Its unlikely it could be vacuum because of its age. Their is a computer for newer trans and sometimes some of the components can fail. I once bought an accord that lost 2nd and 3rd due to its computer, shifted great after i hit the junk yard. If it shifts hard though, solenoids and valve body gasket.

Jul 23, 2012 | Cars & Trucks

1 Answer

I have a 2000 GMC sierra 2500 truck. The guy I bought it from had a new transmition put in it. After driving a while I noticed that the tranny wouldn't shift into low gears 1st & 2nd on comand. and...


-----check possible tps [throttle position sensor ]circuit for damage or faulty sensor----if good check the fuses and trans harness for shorts damage or disconnection,check o2 sensors wiring possible ground to exhaust ,or internal leak 2nd gear apply circuit[servo assembly or 1-2 accumulator] or poor pump pressure

Feb 13, 2010 | 2000 GMC Sierra

2 Answers

My 1994 Ford Explorer automatic transmission won't shift from 1st to 2nd ... BUT will shift into 3rd if I run it in 1st gear to sufficient speed then remove accelerator pressure ... wait 3-5 seconds and...


Hi there,

As your Auto transmission is fully electronic, it could be anything from faulty sensors sending incorrect signals to the trans computer, or faulty internal components. Your best bet is to have the trans computer scanned for 'fault codes' (as the computer monitors and retains all faults) by your local Ford dealership.

This process will identify the likely component/s which are causing this problem.

My guess is, there may be a problem with the 2nd clutch (yes that's right, automatics have internal clutches!), input and/or output shaft switches sending incorrect signals to the computer.

But, there could be so many other possibilities....so, I recommend you get the codes scanned and go from there.....

Nov 12, 2009 | 1994 Ford Explorer Limited

2 Answers

94 dodge neon auto tranny


Hi,

Here is some possible reasons why your transmission is having those problems .

* The gear shift linkage is binding
* There is an internal problem in the transmission
* The throttle cable is broken or disconnected
* The vacuum modulator on the transmission is faulty or the vacuum line is damaged
* The electronic transmission control circuit may be faulty

Feb 26, 2009 | 1995 Dodge Neon

1 Answer

Automatic tranny gets hungup between 2nd and third gear.


possible governor problem;
this part or group regulates the fluid pressures during changing loads.

Jan 22, 2009 | 1995 Audi 90

1 Answer

1st and 2nd shift error on code reader in trans


Shift error codes are enabled not only if the solonoids are faulty, does your scanner show you the solonoids switching? you could have a wiring fault. It could also be the pcm not allowing the solonoids to activate. These complicated systems are very difficult to diagnose for us profesionals with all the scanners and machines we have. Find a transmission shop in your area with a system to drive the vehicle bypassing the computor system, this will determine electrical or internal trans failure. But before you do anything check your conections from the transmission to the pcm. Also all the engine conectors and earth straps.

Dec 20, 2008 | 1997 Chevrolet K1500

1 Answer

Hard shift and blinking overdrive


The blinking overdrive button is telling u that a serious fault has occurred in the electronic controls or a mechanical fault such as excess slippage is occurring.

Jul 16, 2008 | 2000 Ford Ranger SuperCab

Not finding what you are looking for?
1995 Ford F150 Styleside Regular Cab Logo

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...