Question about 1994 Chevrolet S-10 Blazer

1 Answer

94 chevy S-10 blazer driver's door power window stopped working, all other windows work. I already replaced the switch and the motor, don't know what else it could be??????

Posted by on

  • Ned C Cook
    Ned C Cook May 11, 2010

    Do you have power?to and from the switch? Is the motor and properly grounded?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 118 Answers

A bad ground a relay fuse ? hope this helps

Posted on Sep 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why doesn't my 2000 chevy blazer power windows and door locks and remote mirror doesnt work. Power window on passenger side does work


well, the first thing is to check the fuses and or relay for power windows.should be listed in your owners manual. if ok, then remove switch from drivers side window and check for power. if power to the switch then use a jumper wire from power side to motor side of switch. if window works then its the switch causing the problem. Good-day!

May 04, 2014 | 2000 Chevrolet Blazer

1 Answer

94 Chevy Blazer S10 driver side front power window not working. The window motor works with the switch but the gears don't seem to meshing.


OK remove the motor out , and take the motor cover out and you will found 3 thing broken in said , replace it . let me know .

Nov 16, 2011 | 1994 Chevrolet S-10

1 Answer

2000 Chevy Blazer Power Window


i have same problem with my drivers side window and now as of today,the drivers wiper wont work???????

Nov 16, 2009 | 2000 Chevrolet Blazer

2 Answers

I have a 1992 Chevy S-10 Blazer with power windows. I am looking for the regulator and cant find it. Where is it located? I have already checked the only places I can think of under the hood and by the...


the windoe regulator is inside the door each window that goes up and down have their own regulator it is attached tothe window except for the one thats broken lol

Aug 06, 2009 | Chevrolet S 10 Cars & Trucks

2 Answers

2005 chevy impala rear driver power window stopped going up.stuck


If neither switch works it is a bad connection at the motor or bad ground or a bad motor. Remove the door panel unplug the motor push the switch and see if there is 12volts on the wires if there is the motor is bad There are small brushes in the motor that go bad tap on the motor while pushing the switch if it works that way replace it

Mar 29, 2009 | 2005 Chevrolet Impala

3 Answers

94 chevy s10 blazer power windows not working


I had the same problem - driver side fine, passenger side front not working/slow or the back seat. You need to replace the window motor on the passenger side. Yes, there are two motors. It's pretty simple if you are handy with some tools. The hardest part is getting the 4 mounts that hold the window motor to the door off. The are factory riveted to the door, so I had to grind the outsides off and tap them out. Just watch the spring lever that holds the window bar for going up and down. I didn't pay attention and it snapped back - nearly broke my thumb.

Dani-Lynn

Feb 28, 2009 | 1994 Chevrolet S-10

2 Answers

All 4 power windows on 1999 Chevy S-10 Blazer started moving slow and then stopped working.


they have a relay for the windows i would start there check with dealer for location or your parts store as they are located all different places

Oct 26, 2008 | 1999 Chevrolet Blazer

1 Answer

Driver side power window inop, passanger window works fine


Had the same problem with my 94 s-10 blazer. Window guides were warped and dirty. Caused the relay for the window to act like a circuit breaker. Just waited for it to cool off and reset. Remedy is to clean guides, tighten them and replace window switch. Mines worked fine since then

Aug 02, 2008 | 1994 Chevrolet S-10 Blazer

1 Answer

1995 Chevy Blazer Wire Color Codes


95-97 blazer or 94-97 S-10
12volts red (there will be 2)+ ignition harness
Starter purple or yellow + ignition harness
Ignition pink + ignition harness
Second Ignition white or pink/white + ignition harness
Accessory orange + ignition harness
Power Lock lt. blue + either kick panel
Power Unlock white + either kick panel
Lock Motor gray drivers kick panel
Unlock Motor tan drivers kick panel
Parking Lights+ brown switch or rear harness
Door Trigger white - keyless module
Dome Supervision use door trigger
Trunk/Hatch Pin tied in with doors
Trunk/Hatch Release black/white + switch or keyless
Tachometer white AC ECM
Brake Wire white + at brake pedal switch
Parking Brake black at the pedal
Horn Trigger black - steering column

Jun 13, 2008 | 1995 Chevrolet Blazer

Not finding what you are looking for?
1994 Chevrolet S-10 Blazer Logo

441 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...