Question about 2001 Ford Ranger Regular Cab

2 Answers

Is there a way to have one key for a 1986 bronco 2

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 47 Answers

The only way is hire a company to come to yo place and have them make a key for and should not cost more than 120 dlls depending the area where you at

Posted on Sep 24, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,976 Answers

You can only have one key, if all the lock cylinders match. A locksmith can get matching cylinders but, it isn't always real cheap and depending on how the vehicle was built, there will be 2 different styles of cylinder mounts. It's worth a try, asking a locksmith for an estimate though.

Posted on Sep 24, 2009

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 41 Answers

SOURCE: i am looking to replace

well first off which tranny do you have?? if the vin code is T it is automatic-A4LD, which was used in the years of 1984-1990 if you have a manual tranny then it might be one of these two.. toyo koygo tk5 vin code is 5 which was used in the years of 1985-1987, they also used a mitsubishi FM145 vin code D in the years of 1985-1987 hope that helps..

Posted on Feb 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am looking to replace the tranny in my 1986 bronco 2. what other bronco 2 year models will fit?


well first off which tranny do you have?? if the vin code is T it is automatic-A4LD, which was used in the years of 1984-1990 if you have a manual tranny then it might be one of these two.. toyo koygo tk5 vin code is 5 which was used in the years of 1985-1987, they also used a mitsubishi FM145 vin code D in the years of 1985-1987 hope that helps..

Nov 16, 2010 | 1986 Ford Bronco II

1 Answer

How to get pressure out of fuel line to replace filter on a 1986 ford bronco 11 xlt


Wait 24 hours after the last time the ignition key was used, pressure should be near atmospheric by then.

Oct 19, 2010 | 1986 Ford Bronco II

1 Answer

1986 Bronco II: How do i change the headlights on my '86 Bronco 2?...


there are two screws in the healights. Undo them from the front with a philips head screwdriver. Pull off the wiring harness from the back of the bulb under the hood and remove your light. Take it to your local auto parts store, (unless you already have your new lights!) and they'll get the right ones for you. Repeat the procedure in reverse.

May 16, 2010 | 1986 Ford Bronco II

1 Answer

1986 fORD BRONCO, WASN'T CHARGING CHANGED THE


1. get the battery tested to rule out a collapsed cell.

2. If the battery is ok, check the wiring harness that runs from the passengers front corner, to the drivers front corner, for a break in the wires. A common spot to find one would be near the passengers side.

Sep 13, 2009 | 1986 Ford Bronco

1 Answer

1986 ford bronco 2 4wd wont turn over and clicks


Check the starter solenoid on the passenger side near the battery under the hood, the small terminal is the lead from the ignition switch, when the key is held in the start position there should be 12 volts at that terminal.. the wire to that terminal just pushes on.

Dec 04, 2008 | 1986 Ford Bronco

Not finding what you are looking for?
2001 Ford Ranger Regular Cab Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...