Question about 2000 Ford F250 Super Duty Crew Cabs
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: frt lock out hubs inop
A snap ring holds the lock assembly. Get a set of snap ring pliers to help remove them. Then remove the caliper and disc , There should be 4 bolts on the back to remove. Then it should just comes right off.. Be careful it is quite heavy. Check for an ABS sensor wire if equipped. And vacuum hoses on hub .
Posted on Sep 15, 2009
The HPOP (high pressure oil pump) is right under the filter housing. There are 2 lines that distribute the oil to the cylinder heads. The o-rings on those fittings go out. Kit is available from Ford or International. You will need a special wrench to get to the fittings though.
Posted on Jun 23, 2008
hello,yes you do have to take the hub off to replace the ball joint with the ball joint being on the back side of the hub. hope this helps and please rate this.
Posted on Mar 15, 2009
Tips for a great answer:
May 06, 2016 | 2005 Ford F 250 Super Duty
Jan 19, 2011 | 1999 Ford F250 Regular Cab
Dec 15, 2010 | 2000 Ford F250 Super Duty Crew Cabs
Jun 07, 2010 | 2002 Ford F250 Super Duty SuperCab
Jan 16, 2010 | 2000 Ford F250 Super Duty Crew Cabs
Dec 22, 2009 | 1992 Ford F250
Mar 15, 2009 | 2000 Ford F250 Super Duty Crew Cabs
2,769 people viewed this question
Usually answered in minutes!