Question about 2000 Chevrolet Venture

2 Answers

How do i replace the belt tensioner on a 1999 chev Venture

Posted by on


2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 299 Answers

First remove the belt making sure to make a diagram for reinstallation then locate and remove the two bolts securing the tensioner these bolts are tightened to 40ftlbs install is the reverse of removal

Posted on Sep 24, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 118 Answers

FWD they are usually pretty simple just not alot of space to work with
they usually have one bolt or 2 depending on the year make and model you may have to undue the engine and lift it up with a jack to get better access but that's pretty much it

Posted on Sep 24, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do you replace the tensioner on a 1999 Chev 6.5 diesel 350 cube van?

remove the belt unbolt the tensioner and replace. the center of the tensioner has a half inch socket in it . put your pull handle in that socket like you would a normal socket wrench and rotate to relieve pressure on belt remove belt unbolt tensioner

Nov 01, 2013 | 2004 Chevrolet Express

1 Answer

Tension pulley noise

check belt alignment and tension, replace tensioner pulley or belt.

Oct 20, 2013 | 1999 Chevrolet Venture

1 Answer

The drive belt for my 99/ chevy venture is broke

Check all of the pulley grooves for debris and run a wire brush over them a few times. Also check the tensioner by removing the bolt in the center of it. If it looks ok, still remove the bolt because you have a 90% chance that it will fall apart when you remove it. The bolt holds it together if they break internally so it doesn't leave you stranded somewhere.

May 21, 2010 | 1999 Chevrolet Venture

2 Answers

Car wont start

Probably a bad starter activator find it and tap on it sometimes it will kick the starter, but it means the starter will have to be replaced.

May 10, 2010 | 1999 Chevrolet Venture

1 Answer

Tensioner is not putting tension on the belt. Consequently, vehicle stopped running.

you might need a new part or your belt is to long or you might be putting the belt on wrong.

Oct 11, 2009 | 1999 Chevrolet Venture

1 Answer

I need a serpentine belt diagram on a 2000 chev venture

Hello warrenmeriwe: My name is Roger and I will help you. Please see the attached picture. Please rate the quality of your response. This way we can tell your answer was correct. Please just ask should you need further help. Thank You for using Fix Ya. Roger

Sep 14, 2009 | 2000 Chevrolet Venture

1 Answer

Tigthen belt on 03 chevy venture

the belt tensioner is responsible for keeping proper tension on the belt... a likely cause for the squeel is a belt slightly too long or a defective belt.

May 28, 2009 | 2003 Chevrolet Venture Passanger

1 Answer

02 chev venture power sliding door

the plungers seem to be an issue not making good contact twist them around in their bore and also try to initialize the door

Feb 03, 2009 | 2001 Chevrolet Venture

Not finding what you are looking for?
2000 Chevrolet Venture Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides