Question about 2003 Ford Focus

2 Answers

How do you replace the tail light in a 2003 Ford Focus ZTS sedan? not a hatchback

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Fuses are fine but tail lamps, license plate lamps, cluster lights are out.

Posted on May 05, 2013

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

Open up hatch , reach in and pull back liner, Remove nuts to release light lens. then push, turn and pull out bulb socket and same for bulb.

Posted on Sep 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will a shift cable in a 2002 ford focus work in any 2002 ford focus like a ford focus zts sedan?


if they are both 5 speed boxes then it should be the same and will work

Aug 27, 2014 | Cars & Trucks

1 Answer

Is there a difference in shift cables in a 2002 ford focus' s?


They will be the same part number so it should wirk

Aug 27, 2014 | Cars & Trucks

1 Answer

Is there a trick to getting to the rear turn signal on a 2003 ford focus hatchback. I had removed the screw to the lens cover but I still cannot gain access to the turn signal bulb to replace it.


Replacing tail/brake/backup lights and turn signal bulbs (coupe)

1. Make sure the headlamp control

is in the OFF position and then

open the hatchback.

2. From inside the luggage

compartment remove the wing nut

of the rear light assembly cover.

3. Using a Phillips screw driver

remove the screw. The lamp is still

retained by a spring loaded clip.

Remove by gently pulling out the

light housing.

4. Turn the bulb socket counterclockwise as far as possible and pull it

out.

5. Pull the bulb straight out of the socket.

Install in reverse order.

Replacing tail/brake/backup lights and turn signal bulbs (sedan)

1. Make sure the headlamp control

is in the OFF position and then

open the trunk.

2. From inside the luggage

compartment remove the three wing

nuts of the light housing.

3. Gently pull the light housing to

the outside.

4. Turn the bulb socket

counterclockwise and pull it out.

5. Pull the bulb straight out of the socket.
Install in reverse order.

Replacing tail/brake/backup lights and turn signal bulbs (wagon)

1. Make sure the headlamp control

is in the OFF position and then

open the hatchback.

2. Using a screw driver remove the

fixings and trim from the body.

3. Remove the socket from the lamp

assembly

4. Pull the bulb straight out of the

socket.
Install in reverse order.


Hope this helps.

Zeppelinx12

Mar 03, 2011 | 2003 Ford Focus

1 Answer

2003 ford focus ZTS sedan - engine light is on. enough oil, has coolant


check the engine breather pipes under the manifold at the front of the engine ,could be these pipes are perished causing your problem

Jan 23, 2011 | 2000 Ford Focus

1 Answer

2003 ford focus replaced brake switch lights will work in park but when i engage revs neut drive brake lights stay ?????


I have the same problem with my 03 Focus hatchback! Someone stoppedme yesterday to tell me that they looked like they were always on when i was driving but when i was in "Park" they worked... This particular driver was also driving a focus hatchback and asked me if my Cruise Control was working.. It actually was not and he told me the same thing happened with his focus. He said it was a wire attached to the back brake lights that had broken. I have not yet gotten it fixed. has anyone else had this problem?

May 21, 2010 | 2003 Ford Focus

1 Answer

2003 Ford Focus ZTS. After running on the highway


Check for stuck throttle plate. Check pcv hose that goes to the intake manifold. They get soft and leak, check while running.

Mar 19, 2010 | 2003 Ford Focus

1 Answer

2004 Ford Focus ZTS with DTC P2004.


my 04 zts was throwing the same code. I got under the car and found a vacume hose that was off of an actuator thing ,put it back on and hasn't thrown code since

Mar 08, 2010 | 2003 Ford Focus

1 Answer

Tail lights


you'll have to pop open the trunk and pull back the trim.. there you'll see some bolts holding the light down... just unscrew and the housing will come out

Aug 02, 2009 | 2008 Ford Focus SE Sedan

3 Answers

Engine?


not sure what the sound was, but if there's a blown head gasket, the water that gets in a cylinder won't compress and it won't turn over very well and sometimes not at all. that may be what they mean by "holding compression".

check for water in the oil...it'll foam up on the dipstick,

Get a second opinion from a reputable shop other than Ford.... If it's a head gasket, it's much cheaper than an engine swap, if that's what you're thinking...

Jun 07, 2009 | 2001 Ford Focus

Not finding what you are looking for?
2003 Ford Focus Logo

466 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

fordexpert

Level 3 Expert

5613 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...