Question about 1991 Chevrolet S-10

2 Answers

How do you remove a window handle from a 1991 s10 pickup

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 32 Answers

Wow! this is a ******. if you push in on the door panel behind the handle, you might be able to see the clip behind the handle holding it on the shaft. If you know what it looks like a bent screwdriver works well, or you can usually just go to your local autozone and rent the tool that will make removal a snap. when you get ready to reinstall, just pop the clip into the groove on the back of your handle. slide the handle onto its splined shaft and with a sharp blow with your palm, it should pop into its groove.

Posted on Sep 23, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

It will just pull off or you have top pry middle cap of and remove screw underneath..

Posted on Sep 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix manual window that wont roll up


well first make sure the plastic handle isnt stripped,if that not the problem then you will have to remove the door panel to get inside to see if your window slipped off from its track,one you remove any bolts or screws holding on your door pannel and handle etc.you will have to pry out on the bottom and both sides to pop the plastic plugs out then lift upward and it should come off

Jan 16, 2013 | 1991 Nissan Pickup

1 Answer

How do you replace the outside door handle on a 1991 Nissan Pickup


remove the inside panel and wheer the handle go threw the door on the back side their is 2 clips
pull the clips then tilt it side ways and remove the rode in back be carefull their is a plastic clip on the rod you dont want to damage it so you can reuse it. and then the handle will come off

Aug 10, 2011 | 1991 Nissan Pickup

1 Answer

Picture of fuse panel on 1991 S10 pickup truck


Check the Chevrolet S10 - Owners Manual (page 314 and next)...

077da20.jpg

Hope helps (remember rated this).

Jul 14, 2010 | 1991 Chevrolet S-10 Blazer

1 Answer

Crossed up plug wires on 1991 chevy s10 2.8 need diagram


For the 1991 Chevrolet S10 or T10 Pickup 2.8L V6:

Firing Order:
1-2-3-4-5-6

Cylinders:
.......(back)........
|..5..|........|..6..|
|..3..|........|..4..|
|..1..|........|..2..|
.......(front)

Distributor:
....(back)
....3...4.(+)-screw
2...........5
(+)1...6
....(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


Apr 22, 2010 | 1991 Chevrolet S-10

1 Answer

How do I remove drivers side door panel on 1998 Chevy S10 pickup to repair/replace window regulator?


i think there are screws around the door handle on the in side that need to be taken off the the rest just pop out

Feb 01, 2010 | 1998 Chevrolet S-10 Pickup

1 Answer

Removing the window crank on a S10...


there is a universal tool that has both sizes in it, it is made by KD tools ,and yes I have removed these clips with a couple of "jewelers" screwdrivers

Jul 07, 2009 | 1998 Chevrolet S-10 Pickup

1 Answer

I need to know how to replace the door handle for my 1988 s10 pickup


Have to remove the 2 screws in the arm support, slide off, have to remove the hand crank (special tool needed here) and then pull off the door panels with special tool to pry the plastic clips out. Once the panel is off, put the window at its top position and unclip the plastic actuator that holds the rod into place. Undo the 2 selfcutting bolts and replace in the reverse.

Apr 24, 2009 | 1988 Chevrolet S-10

1 Answer

1991 chevy s10 pickup 4.3 engine


Check for vac. leaks and timing.

Jul 11, 2008 | 1991 Chevrolet Suburban

1 Answer

1991 s10 pickup


what size engine do you have in your s10 pickup?

Jun 25, 2008 | 1991 Chevrolet S-10

Not finding what you are looking for?
1991 Chevrolet S-10 Logo

Related Topics:

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...