Question about 1999 GMC Yukon

1 Answer

How do i remove the right back light on my truck so i can replace my light bulb?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 43 Answers

OPEN THE BACK DOOR AND THEY'RE TWO SCREWS ON THE LIGHT ASSEMBLY, REMOVE THEM THEN REMOVE THE PLUGS WHICH THE LIGHT HAS TO BE REPLACED.

Posted on Sep 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW TO REPLACE BRAKE LIGHT ON 1997 F 150 TRUCK


if only one side of brake light is out it's probally the bulb, these are easly changed , by first going to auto parts store and getting new bulb , then using phillips head screwdriver remove four screws that are around permiter of tailight that is out , carefull dont loose these screws you'll need to put them back , gently rock tailight back and forth to break gasket seal and pull light straight out of truck it comes out about 10 inches , this modle has if i remember right three bulbs in taillight it's the center one if i remember right grap the white plastic bulb holder firmly and turn 1/4 turn counterclockwise the bulb holder should come free of tail light , grab bulb with one hand and holder with other and wiggle gently sideto side till bulb pops free of holder , use a clean towel or cloth to hold new bulb and insert it back same direction as previous bulb, wipe all smuges and fingerprints off bulb (this would cause hot spot on bulb and make it fail early) reinsert holder into tail light , I use car wax as gasket renewer on tail light border before i put it back in, but thats optional reinstall all four screws back in , there you are done !!

May 13, 2014 | 2000 Oldsmobile Alero

Tip

How to change a headlamp in a mercedes benz c280


When changing a headlamp in a mercedes benz c280 1995. Lift the hood latch on the inside of the car. This is located under the driver side of the car. Release the hoodlatch in the front. Open the hood and behind the headlamp (left or right), Remove the two clamps that hold the back cover onto the light. After this cover is removed, behind the headlight there is a wire behind the light that hold the light in. Squeeze the two wires together and pull them back. This will release the light. Remove the light from the socket. Place the new bulb in the socket. Remember not to touch the bulb with your fingers, this could cause the bulb to break if it gets the oil from your fingers onto the bulb. Once the bulb is replaced, put the wire back in place and replace the back cover of the light.

on Nov 27, 2010 | Mercedes-Benz C-Class Cars & Trucks

1 Answer

No tail-lights on right side of 2006 buick lucerne


The bulbs are most likely burnt out. Right Front will be difficult to replace. Rear bulb is easy. You need to open trunk and find 4 nuts that hold the light in and remove them and the taillight will come out rearward. Locate the bad bulb your owners manual will tell you the number. It also will be on the bulb. The front I replaced when one of my headlights went out and I had to take apart the front of the car and I replaced ALL the bulbs and put it back together.

Jan 16, 2014 | 2006 Buick Lucerne

1 Answer

Replacig a light bulb for a dome in 2001 dodgegrandcaravan


Remove the screw holding the dome light cover in place by turning it counterclockwise with a screwdriver....Remove the old bulb by twisting it slightly to the left and pulling it straight out. Dome light bulbs can be fragile, so be careful not to break the bulb with your fingers...Slip the replacement bulb back into place by pushing it in and twisting it slightly to the right...Replace the cover. I hope this helps, thank you for using FixYa!

Jul 02, 2011 | 2001 Dodge Grand Caravan

1 Answer

My speedometer and gas light does not work...please help


you will need to remove the cluster trim, then remove the screws holding the cluster in the dash, disconnect connectors to cluster remove and turn over on the back side you will see the bulb sockets you turn them counter clockwise and remove them the bulb pulls out and push new one in socket and put back in cluster, use flashlight to point into hole to make sure you are replacing the right one., if you look in the front while pointing light in hole that you removed the bulb you will see if thats the right light. hope this helps.

Aug 28, 2010 | 1996 Pontiac Grand Am

1 Answer

I need to know how to replace a light bulb in the rear.It is a brake light


hi..
follow these steps.

1.switch off the car
2.remove the tai light cover using screw drivers
3.remove the bulb ib the socket
4.replace with new bulb .make sure you choose than right power bulb or else it wont work
5.put back the cover

please vote me if the infomationwhich gave you was useful by clicking the thumb on your lower side of your page.

Jul 10, 2010 | 2007 Jeep Liberty Sport

1 Answer

How do i change out the head light


Hi,
Unlike the cars and trucks of the good ole days, todays headlights are simply, bulbs inserted into the back of the lights... generally installed with just a quarter turn. All the plastic is nothing more that a "light fixture".
Pop the hood and look at the back side of your healight. Remove the bulb connector (counter clockwise twist) to get the bulb out.
You should be able to get a replacement bulb at Walmarts... take your old bulb with you to insure you get the right one. It should install as easily as it was removed.
Hope this helps... Good luck!

Oct 12, 2009 | 2005 Chevrolet TrailBlazer

1 Answer

Steps to replacing right front signal light bulb in 2005 Malibu


Raise hood and remove two hex bolts holding light assembly. You will see three round rubber covers, approximately 4" in diameter. Unscrew the one to the far left, giving access to the signal light bulb. The bulb pulls straight out. Insert new bulb, replace rubber cover, attacht light assembly back to vehicle with hex bolts, close hood, and pat yourself on the back for job well done.

Mar 30, 2009 | 2005 Chevrolet Malibu

2 Answers

I need to know how to change brake light bulb in 97 voyager


open back door un screws on side of the light and remove to replace bulb on back

Dec 21, 2008 | Plymouth Voyager Cars & Trucks

1 Answer

Fog light bulb replacement


This bulb can be replaced without removing the washer fluid reservoir. There are 3 screws that go through the bottom edge of the bumper cover into the right inner fender guard. Remove these screws and pull the inner fender down to gain access to the back side of the fog lamp and remove the bulb.


Nissan Scope Technician- 10+ years experience in Nissan dealership.

Nov 04, 2008 | 2003 Nissan Murano

Not finding what you are looking for?
1999 GMC Yukon Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...