Question about 1992 Honda Accord

2 Answers

Crank shaft positon sensor good. No spark to car. cranks over real good.

Posted by on

  • abelyrosie Sep 24, 2009

    Changed everything plus ignition module twice. new coil and still no spark. My rely sounds good fuel pump kicks in. Cannt figure out what to do next.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Honda Master
  • 715 Answers

Replace the ignitor in the distributor

Posted on Oct 13, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 299 Answers

Check the ignition coil,cap,rotor and wires

Posted on Sep 23, 2009

  • Eliezer Miller Sep 24, 2009

    check the fuse and the engine grounding keep in mind it can be a bad pcm

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jeep cranks but does not start


Hi, First replace your plugs. Second check ignition coil(s) one maybe bad. replace with new. If all else is good, have your mechanic check the computer codes. (code scanner) Many of todays cars and trucks have computers to run and control the engine. (management system). Good luck

Feb 04, 2015 | 2004 Jeep Liberty

1 Answer

Can you tell me where a crankshaft positon sensor is on a 2010 Dodge Journey 2WD 2.4 liter engine


Most of the crank shaft sensor are located behind the main pulley or crank pulley just follow the wire when u open up the timing cover

Feb 03, 2015 | Dodge Cars & Trucks

1 Answer

Crank shaft sensor, 99' taurus


If the crank sensor is bad you will not get any spark. The PCM does not know the engine is turning with no crank sensor signal so it it does nothing.

What else is it doing?

Feb 24, 2014 | Ford Taurus Cars & Trucks

1 Answer

Where is the crank shaft positon sensor on an 96 chrysler town and country 3.3


On the LEFT hand side of the car. Begin at the battery, then you can see the top cable harness (PINK) running around towards the rear. Just past half way, the Crank Sensor (GREEN) connector is there. This is the view from Left Hand side behind the engine looking forward and centre.
247d4bd6-4349-4c76-8a44-4542968aef0c.jpg

Jan 11, 2014 | 1996 Chrysler Town & Country

2 Answers

Replaced fuel pump & battery will not start


you have a ignition modulor in the distributor and the crank positon sensor. I have a 1997 grand cherokee and I go through a few crank position sensor

Oct 29, 2012 | 1994 Jeep Grand Cherokee

3 Answers

Went to work one morning and going home after work and car will not start getting fuel pressure and spark.


replace crankshaft positon sensor or cam shaft postion sensor they control in what order to fire the spark common issues when a crank postion sensor fails is non start situations


if it helps at all l please leave a good review

May 09, 2011 | 1999 Volkswagen Cabrio

2 Answers

Turn over will not start


Are you check if the THEFT SYSTEM is armed? Check battery charge and spark from coils.

May 05, 2011 | 2002 Jeep Grand Cherokee

1 Answer

My jeep grand cherokee needs a crank shaft sensor


You need a quarter inch ratchet and a socket to fit the two bolts...You will also need about 100lbs of patience (it's a real pain to reach)
Good luick

Jan 31, 2010 | 1999 Jeep Grand Cherokee

1 Answer

Where is the crank shaft positioning sensor located on a 01' Cherekee Sport with a 4 liter? What are the symptoms of a faulty Crank shaft positioning sensor?


Look at the area around the crankshaft pulley. It's bolted to the block and senses the crank position. If it fails, You won't have an ignition spark. Good Luck, Ned

Aug 27, 2009 | Jeep Cherokee Cars & Trucks

1 Answer

1998 hyundai accent


make sure crank sensor is all the way seated care taken 10mmnut dont over tighten or you will break sensor

Sep 23, 2008 | 1997 Hyundai Accent

Not finding what you are looking for?
1992 Honda Accord Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7711 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...