Question about 2005 Chevrolet Impala

1 Answer

2005 impala radio works, no sound or warning charms for low fuel.

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 92 Answers

If you purchased this vehicle used sometimes people will take the fuse out to stop the chime for low fuel and doors open. If your saying that the radio works and there is sound, this has nothing at all to do with the chime for the low fuel. Check the fuses and see if one is blown or removed. I hope this helps, good luck..

Posted on Sep 23, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is my door chime located impala 2002

It comes through the radio an left front speaker .
The audible warnings alert the driver of a system concern or a critical vehicle condition. The radio generates the audible warnings through the left front speaker. The radio receives audible warning requests via the class 2 serial data line. If the radio receives multiple audible warning requests, the warning with the highest priority sounds first. The Multifunction Alarm generates the audible warnings on vehicles with RPO UL5 -- Radio Delete Option. The following lists the audible warning priority and the pulse rate:
The radio activates the door ajar audible warning as requested by the body control module (BCM). The BCM sends a class 2 message to the radio indicating the chime frequency of a medium rate and at a continuous duration. The door ajar warning sounds and the door ajar indicator illuminates when the following occurs:
  1. The body control module (BCM) determines that the driver's door is open and the signal circuit low. The IPC receives a message via class 2 from the BCM requesting illumination of the door ajar indicator.
  2. The vehicle is not in park. The BCM receives a class 2 message from the PCM indicating the gear position.
Class 2 Serial Data Link
The class 2 serial data link allows the following modules to communicate and share data with each other:
Auxiliary Power Drop Connector

Body Control Module (BCM)

Driver Information Center (DIC)

Electronic Brake Control Module (EBCM)

Instrument Panel Cluster (IPC)

Powertrain Control Module (PCM)


Remote Playback Device-CD Player (if equipped with UQ3)

Inflatable Restraint Sensing and Diagnostic Module (SDM)

Vehicle Interface Unit (VIU) (if equipped)

The class 2 serial data link allows a scan tool to communicate with the above modules for diagnostic and testing purposes.

Nov 16, 2015 | Cars & Trucks

1 Answer

Radio sound not working

I had the same problem with my 2005 Impala radio. The soloution was: Locate the wiring harness under the carpet in the passengers side behind the front seat. You need to untape it (there's a lot of tape) take off the plastic covering and look for the Orange wire. Follow the orange wire towards the rear of the car until you see where it splits into 2 Orange wires. Common problem is corrosion at the split. Cut the wires and resplice them together. My problem was solved right there!!

Mar 27, 2013 | 2005 Chevrolet Impala

3 Answers

2005 chevy impala: How do I shut off "low tire pressure" warning light?

Turn your car ignition on but dont start it. Then pull your lights out one click push back in repeat process two more times and you should hear a chime and it will reset. I've had to do this lol

Aug 15, 2010 | 2005 Chevrolet Impala

1 Answer

About 30% of the tiem when i start my car, i ahve


Apr 22, 2010 | 2005 Chevrolet Impala

1 Answer

Just purchases my 2005 Impala. It should get a combined 26 mpg, but I am getting about 13 mpg. Its the base model 3.4 v6. Doing mostly city driving with occasional highway

Combined fuel ecomony is based on 50/50 driving between city and highway. But I agree that 13 mpg is quite a bit down from that!

Do you have a "check engine" light staying on while you drive?
I am guessing you don't or you would have mentioned it.

Bad fuel economy with no warning indicator can be a sign of problems with low fuel pressure or a non-functioning coolant temp sensor.

The coolant sensor can be reading in the cold range and keeping the car in a "cold/starting" condition that won't allow for the car to adjust to being warmed up.

I would have the car checked for any error codes by a local shop or parts store that offer cheap or free scans. At least to rule out the coolant sensor or fuel pump. The fuel pump will eventually go completely out if it is going bad so better to know now than later! Fuel pumps are expensive to replace and you will want time to save up for the job!

Good luck and be careful.

Dec 21, 2009 | 2005 Chevrolet Impala

1 Answer

I replaced the coil blocks, wires, and plugs on my 2005 chevy impala 3.4. I am still getting random misfireing, what else can it be?

could be a fuel problem or a fuel injector. these engines are also bad to leak water at the intake manifold gaskets, if coolant leaks internally it would kill the spark and cause a misfire. if its not low on coolant though i'd keep checking fuel and fire

Oct 24, 2009 | 2005 Chevrolet Impala

1 Answer

2005 impala has no dash lights at all,exeptthe

usually in the newer impalas the bcm (body control module) located under the dash on top of the emergency brake pedal

Feb 24, 2009 | 2003 Chevrolet Impala

3 Answers

Drivers Information Center in a 2005 Chevy Impala

Turn the key to the on position (not start) with the radio off. Wait 10 seconds. Press the "display" button on the radio and hold for 10 to 12 seconds. the radio display will light up . Press "display" and "1" to select functions.

This was not tested or confirmed by me, but my dad has a 2005 Impala and this is what he told me. Let me know if it works or not, and I can try to investigate it more if needed.

May 14, 2008 | 2005 Chevrolet Impala

Not finding what you are looking for?
2005 Chevrolet Impala Logo

615 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

80417 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides